Toyota Hilux 1977 I Asure U U Wont Find One Like This on 2040-cars

Auto blog

Japan carmakers vouch for safety of some Kobe Steel parts

TOKYO — Four Japanese automakers on Thursday said they found no safety issues with aluminum parts supplied by Kobe Steel Ltd, allaying some concerns that falsified quality data on products from the steelmaker had compromised their vehicles. Kobe Steel shares surged after the car makers' statements, but the steelmaker still has to contend with a U.S. Justice Department probe, while checks continue at hundreds of companies involved in complex supply chains spanning the globe. Japan's third-biggest steelmaker admitted earlier this month it falsified specifications on the strength and durability of aluminum, copper and steel products, along with materials for optical disks. The falsifications stretch back for more than 10 years, a senior executive told Reuters this week. Since then, global automakers, aircraft companies and other manufacturers have scrambled to identify potential hazards in their products. Toyota, Honda, Nissan and Mazda said that hoods and other exterior parts used in their cars which were made from aluminum directly supplied by Kobe Steel were safe. Kobe Steel shares ended the day nearly 7 percent higher but are still down by more than a third since it announced the data falsification. Automakers are still making checks on other parts, including those that they received through their parts suppliers. "We confirmed that the materials satisfy applicable statutory standards, and our own internal standard, for key safety and durability requirements for vehicles," Toyota said in a statement. Toyota, one of the world's largest automakers, identified aluminum plates supplied by Kobe Steel for the hoods and rear hatches of Toyota and Lexus brand vehicles. Though outside the automaker's specifications, they were still safe to use. While Subaru and other carmakers said they were still investigating the issue, the announcements by Toyota, Honda, Nissan and Mazda suggest that Kobe Steel's cheating scandal may have a limited impact on product safety."SERIOUS SITUATION" Nonetheless, the company's fate hangs in the balance while checks are being carried out. It must report to Japan's industry ministry by around the end of next week on any safety concerns and provide a more extensive account of the problems a fortnight later. Industry leaders have reached a consensus that Kobe Steel is in a "serious situation," a senior Japanese manufacturing executive told Reuters.

IIHS: Drivers safer than passengers in frontal crash test

The Insurance Institute for Highway Safety introduced a small overlap frontal crash test in 2012 that replicates what happens when the front corner of a car impacts another object. In the test, vehicles travel at a speed of 40 mph toward a five-foot-tall barrier with 25 percent of the total width of the car striking the barrier on the driver side. One would assume that vehicles with good small overlap front ratings would protect the driver and the passenger equally. But a recent study from the IIHS proves that passengers aren't as protected as drivers. The IIHS conducted the test on seven small SUVs with good driver-side small overlap ratings and only one of the vehicles, the 2016 Hyundai Tucson, performed well enough to be given a good rating. The other SUVs performance ranged from poor to acceptable. After reviewing the results of the test, the IIHS is deliberating whether it should institute a passenger-side rating as part of its Top Safety Pick criteria. "This is an important aspect of occupant protection that needs more attention," states Becky Mueller, lead author of the study and an IIHS senior research engineer. "More than 1,600 right-front passengers died in frontal crashes in 2014." Since the small overlap front test was introduced, 13 automakers have made structural changes to 97 vehicles with roughly three-quarters earning a good rating after the adjustments. The IIHS' test for frontal ratings is completed with a dummy in the driver's seat and with a barrier overlapping the driver's side. Which makes sense, as passengers aren't always riding in a vehicle. "It's not surprising that automakers would focus their initial efforts to improve small overlap protection on the side of the vehicle that we conduct the tests on," states David Zuby, IIHS executive vice president and chief research officer. "In fact, we encouraged them to do that in the short term if it mean they could quickly make driver-side improvements to more vehicles. As time goes by, though, we would hope they ensure similar levels of protection on both sides." As the IIHS' test revealed, there's a massive difference in safety between the two front seats. Increase passenger safety, according to Mueller, would require automakers to strengthen the occupant compartment by using a different type of material or by making it thicker.

Toyota updates Euro-market GT86 suspension, appearance

While we were busy ogling the Scion FR-S Release Series 1.0 with its Yuzu yellow paint and a workover by Toyota Racing Development, and the Japanese Toyota 86 buyers were trying out their Playstation-compatible Sports Drive Logger telemetry system, the European 2015 Toyota GT86 got fitted with some new parts of its own. New on next year's model are stiffer mounts for the front suspension and rear shock absorbers, and new shocks in the back for better damping and less friction. Toyota says the result is sharper steering and less body roll.
Inside, the instrument panel and center console get decorated with a "carbon-fiber motif." There are new shades of pearl white and silver to dress up the outside, and the roof gets a shark-fin antenna for sharper looks and aero. It goes on sale this summer, and you can read everything we just told you in the press release below. We've reached out to Scion to see if we'll get the same upgrades on the FR-S this summer, too, company PR rep Nancy Hubbell telling us, "The European changes are among those being considered for the US model FR-S and we'll have final confirmation soon."