1997 Toyota Corolla, No Reserve on 2040-cars

Auto blog

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

Toyota puts three-wheeled i-Road into public tests in Japan [w/video]

The lucky citizens of Japan are getting it now, and some folks in France will join the fray later this year, but that's about it for public, leaning-trike fun. The car in question is Toyota's three-wheeled i-Road concept electric vehicle. And in addition to being really narrow and quite environmentally friendly, this little EV leans quite a bit when it scoots around curves. Earlier this week, the Japanese automaker started testing the super-narrow vehicles in Toyota City, Japan. They're part of a broader scheme called "Ha:mo" in which people can link shared vehicles with public transportation systems to get around with minimal environmental impact. Grenoble, France, will be the recipient of some i-Road EVs for a vehicle-sharing project that starts later this year. The i-Road weigh about 660 pounds, is less than a yard wide and has a 28 mile per hour top speed. The i-Road was first shown off at the Geneva Motor Show early last year and shortly thereafter was the subject of a groovy video that showed a group of four cruising and leaning through the streets of a Mediterranean village in France. Check out Toyota's video on the vehicle-testing program and the official press release below and read our driving impressions here. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Changing Mobility and Lives, Three Wheels at a Time Residents of Toyota City, Japan, might be wondering what they just saw on the street. If it had three wheels and was leaning around a corner, it was the "i-Road", Toyota's ultra-compact all-electric, all-fun concept. On Sunday, the i-Road, which weighs a mere 300 kg and is less than 90 cm wide, was let loose on public roads at an event to mark its introduction into "Ha:mo", Toyota's optimized urban transport system. Soon, even more i-Roads will be zooming around Toyota city when they are made available to residents at vehicle-sharing stations. And later this year the lucky residents of Grenoble, France, will also be able to have some three-wheeled fun, thanks to a vehicle-sharing project that will last until 2017. Besides being an absolute blast to drive, how could the i-Road actually help you out? Well, picture the following: You just got off work. You get a phone call. You need to get across town, pronto, because your wife just went into labor. But your car is in the shop, there's no time to call a taxi, and your co-workers with cars are stuck doing overtime.

Toyota Supra, Rolls-Royces, dozens of BMWs recalled for backup camera issue

Weeks after Nissan and Infiniti recalled more than 1.2 million vehicles for a potentially dangerous programming oversight in the backup camera settings, BMW has issued a recall for similar problems. The recall, which covers 257,481 vehicles, includes numerous BMWs, as well as two Rolls-Royce models, and the 2020 Toyota Supra.  In total, the recall potentially affects 51 different products. This includes the 2018 BMW 540D, 2018–2019 BMW 640I, Rolls-Royce Phantom, 2018–2020 BMW 530e, 530i, 540i, M5, M550i, X3, 2019 Rolls-Royce Cullinan, 2019–2020 BMW 330I, 740Le, 740Li, 745Le, 750Li, 840i, M340i, M850i, X4, X5, X6, X7, Z4, and 2020 Toyota Supra. On certain BMW models, xDrive variants are also included. According to NHTSA campaign No. 19V684000, "The back-up camera and display settings can be adjusted such that the rearview image is no longer visible and the system will retain that setting the next time the vehicle is placed in reverse." If there is no display image when backing up, drivers can't properly see, and the car no longer meets modern safety regulations. Specifically, Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."  The recall was filed on September 27, 2019, and BMW plans to begin notifying affected owners in November. BMW, Toyota, and Rolls-Royce dealers will update the vehicles' software, which should fix the problem.