10 Le 1.8l 16" Alloy Wheels Cd Mp3 Player Clean Pwr Locks Windows Tachometer Toc on 2040-cars

Auto blog

Toyota's Copen GR Sport is a tiny, racy roadster

In its home market, Toyota has a designated sport brand called GR, which is meant to invoke Toyota's Gazoo Racing division. It has three tiers of sportiness: the entry-level GR Sport, GR, and all-out range-topping GRMN. Ahead of the Tokyo Motor Show, Toyota announced it is adding to its GR Sport lineup a new mini convertible called the Copen GR Sport. Toyota pulled the Copen from Daihatsu's bank of cool minicars. Diahatsu announced its own Copen GR Sport at the Tokyo Auto Salon in early 2019. Now Toyota will sell its own hotted-up version of the tiny roadster. Toyota Gazoo Racing tweaked the new model and gave it sportier equipment and a visual update inside and out. First, let's talk basic stats. The Copen GR Sport weighs roughly 2,000 pounds and has a 0.66-liter turbocharged engine that makes 63 horsepower at 6,400 rpm and 68 lb-ft of torque at 3,200 rpm. It's front-wheel drive and is available with a five-speed manual or a continuously variable transmission (CVT) with seven-speed Super Active Shift and paddle shifters. Toyota left the powertrain alone and chose to focus on body rigidity and suspension tuning. The Copen GR Sport has specific shock absorbers, updated spring rates, retuned power steering, a new front brace, and a redesigned center brace.  Toyota made the Copen a bit more visually aggressive as well. It has a unique front bumper with side air intakes, a larger front grille, and a rear bumper with a new diffuser look. It also comes with matte gray BBS forged-aluminum wheels, LED headlights, LED fog lights, and LED taillights. GR Sport emblems on the front, side, and rear assure passers-by this is not a regular Copen. In total, eight exterior colors are available, as are multiple color options for the roof. The black interior was spruced up with Recaro sport seats with GR embroidery, a MOMO leather-wrapped steering wheel with the GR emblem, piano black accents, and a new GR instrument cluster with red accents. Unfortunately, the pint-sized roadster is only available in Japan.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

Mixed sales results, but automaker stocks rise on need for cars in Houston

DETROIT — The Big Three Detroit automakers on Friday reported better-than-expected August sales and issued optimistic outlooks for demand as residents of the Houston area replace flood-damaged cars and trucks after Hurricane Harvey, sending their stocks higher. General Motors, Ford and Fiat Chrysler posted mixed August U.S. sales, with GM up 7.5 percent and Ford and Fiat Chrysler down. Japanese automaker Toyota improved sales by nearly 7 percent, while Honda fell 2.4 percent. Still, analysts focused on the potential for Detroit automakers to cut inventories and stabilize used vehicle prices as residents of Houston, the fourth largest city in the United States, are forced to replace tens of thousands, perhaps hundreds of thousands, of vehicles after the devastation from Hurricane Harvey. Mark LaNeve, Ford's U.S. sales chief, told analysts on Friday that following Hurricane Katrina in 2005 "we saw a very dramatic snapback" in demand. That said, Ford sales fell 2.1 percent in August. It sold 209,897 vehicles in the United States, compared with 214,482 a year earlier. Sales were down 1.9 percent in the Ford division and off 5.8 percent at Lincoln. Demand was down for cars, crossovers and SUVs. It was not clear how many vehicles in the Houston area will be scrapped, LaNeve said, saying he had seen estimates ranging from 200,000 to 400,000 to 1 million. Ford's Houston dealers may have lost fewer than 5,000 vehicles in inventory, he said. Ford is the No. 1 automaker in the Houston market, with 18 percent share, according to IHS Markit. The company plans to ship used vehicles to Houston dealers and has "every indication we would have to add some production" of new vehicles to meet demand, LaNeve said. Investor concerns about inventories of unsold vehicles and falling used car prices have weighed on Detroit automakers' shares most of this year. Now, automakers can anticipate a jolt of demand from a big market that is a stronghold for Detroit brand trucks and SUVs. "It's got to be a positive for the industry," LaNeve said. Investors appeared to agree. GM shares rose as much as 3.3 percent to their highest since early March. Ford increased 2.8 percent at $11.34, and Fiat Chrysler's U.S.-traded shares were up 5.2 percent $15.91, hitting their highest in more than five years. GM reported a 7.5 percent increase in U.S. auto sales in August, helped by robust sales of crossovers across its four brands.