1.8l Cd 4 Cylinder Engine 4-speed A/t A/c Adjustable Steering Wheel Cloth Seats on 2040-cars

Auto blog

Recharge Wrap-up: Toyota allowed to inspect own hydrogen tanks, Telsa tour reveals expansion

Japan's Ministry of Economy, Trade and Ministry has certified Toyota to self-inspect its high-pressure hydrogen tanks. The approval allows more freedom in production timing, as outside inspectors previously had to be on site during the manufacture of hydrogen tanks for vehicle prototypes. Toyota has passed the stringent standards to become a registered manufacturer of the 700-bar hydrogen tanks, which the company will use in its upcoming fuel cell vehicle (FCV). With the improved efficiency this certification allows in the manufacturing process, Toyota believes it will help to lower the cost of the FCV. Read more in the press release below. A look inside Telsa's fremont Factory shows thriving activity and increased capacity. Analyst Trip Chowdhry, in a rare tour of the factory, describes a bustling facility capable of producing the Model X and Model III alongside the Model S. A part of the floor labeled "Driver Assist" suggests to Teslarati that Tesla is researching a self-driving car. Chowdhry reports that the factory lobby was "busy with European suppliers and Asian suppliers." He also found an energized workforce and culture similar to Silicon Valley startups. Read more at International Business Times. Mahindra has introduced a premium version of the e2o electric car, made in partnership with Reva. The car features a range of almost 75 miles, power steering, infotainment, rear-view parking camera, driver information display and an emergency power reserve feature, called REVive, offering an extra five miles of range activated through a smartphone. Mahindra also launched a program called "Goodbye Fuel, Hello Electric" in which customers pay to use the e2o by the mile. Learn more at The Indian Express. Toyota Approved to Self-inspect and Manufacture Hydrogen Tanks for FCVs Toyota City, Japan, August 29, 2014-Toyota Motor Corporation has received approval from Japan's Ministry of Economy, Trade and Industry (METI) to self-inspect and manufacture high-pressure hydrogen tanks for fuel cell vehicles (FCVs). This makes Toyota the first company to become a registered manufacturer of 70 MPa (700 bar) hydrogen tanks under Japan's High Pressure Gas Safety Act, revised in 1997 by METI. Toyota will now be able to increase the efficiency of the process of manufacturing safe high-pressure hydrogen tanks that ensure customer confidence.

Toyota brings TRD Griffon GT86 to Goodwood [w/video]

In the midst of the 2013 Goodwood Festival of Speed, there's a particularly special Toyota running up the hill. This special entry is a GT86 (the cousin to our Scion FR-S and Subaru BRZ) that's been poked, prodded, and tweaked by the minds at Toyota Racing Development. The result of TRD's fettling is a nearly race-ready car.
Starting with the body, the hood, doors, trunk lid, and wings are all made of carbon fiber. The lightweight treatment doesn't end there, though. The bumpers, fenders, and diffuser all feature carbon-fiber-reinforced plastic, while the windows are now made of polycarbonate plastic.
Under the hood sits the same 2.0-liter boxer engine found in the standard GT86, but its six-speed manual gearbox features a shorter final drive ratio for improved acceleration. The coilover suspension has been firmed up, and a TRD mechanical limited-slip differential replaces the Torsen unit. The TRD Griffon rides on TWS 18-inch wheels and Yokohama Advan tires. To bring proceedings to a stop, TRD has fitted its own mono-block caliper kit, complete with more robust racing pads.

Automakers' sound systems: Crank it, don't yank it

Years ago, one of the first things most music lovers did after buying a new vehicle was drive to an aftermarket stereo shop to get the crappy stock components swapped for better gear. And you'd typically get not only better sound but also more bang (and boom) for your buck. But in the past decade or so, the overall quality of OEM audio has dramatically increased, while car electronics became more complex, removing the incentive for most new vehicle owners — and all but the most hardcore DIYer — to start from scratch. In 2010, I did a comparison of the average costs for OEM electronics vs. similar offerings from the aftermarket, and back then automakers' stock premium systems were by far the best bargain — and are probably an even better value now. The premium 14-speaker, 1,200-watt JBL system in the all-new 2019 Toyota Avalon is a prime example of this trend. It's standard on the top two Limited and Touring trims and is available as a $680 audio upgrade on the XLE and XSE. I doubt you can even buy 14 speakers and 1,200 watts of amplification from the aftermarket for 700 bucks, much less have it all installed. And because the system is bundled with Toyota's Entune infotainment system, Apple CarPlay and a surround-view camera, removing the head unit means you would likely lose these features. Another advantage of OEMs and their audio partners is they can design the car around the audio system. In the past, automakers would typically place speakers where convenient for packaging, not for optimal sound reproduction, and audio engineers were forced to compromise. But as with the Avalon's premium JBL audio system, this is starting to change. At a recent behind-the-scenes peek for media into the process of developing the system, Toyota and Harman engineers delved into the minutia of sealing the inner panel of the front doors to create an enclosure for 6x8-inch woofers, making space in the pillars for JBL horn tweeters and extensively measuring the acoustic properties of the interior to tune the sound to the space. I'm met some creative and skilled car stereo installers, but none with a degree in psychoacoustics. The system is also the first to feature Quantum Logic Surround that creates a multi-channel listening experience from two-channel sources. And it includes Harman's Clari-Fi processing that "rebuilds key details lost" in compressed audio formats used by streaming music services and MP3s.