2021 Toyota Camry Se on 2040-cars

Auto blog

Toyota recalling 20k 2014 and 2015 cars and CUVs with 3.5L engines

Toyota has announced a recall of roughly 20,000 vehicles covering the 2014 Avalon, Camry, Highlander (pictured) and Sienna, as well as the 2015 Lexus RX luxury crossover. The affected vehicles are all powered the 2GR-FE engine, which in layman's terms, is Toyota's well-regarded 3.5-liter V6.
According to Toyota's statement, a parts supplier might not have welded "the end cap on the right-hand fuel delivery pipe in the engine compartment" correctly, meaning fuel could leak. Leaking fuel, of course, increases the chance of an engine fire. That said, no fires, crashes or injuries have been reported due to the issue.
Owners will be notified to report to dealers, where techs will check the fuel delivery pipe and fit a replacement part as necessary.

Toyota Camry Dragster takes the phrase 'sleeper' to its logical extreme [w/video]

Sometimes, looks can be deceiving. This is certainly one of those times, as Toyota successfully trolled the entirety of the media corps at the 2014 SEMA Show by rolling an innocent-looking Camry onto the floor... only to lift literally the entirety of its body to reveal an 850-horsepower, tube-framed dragster. Well, we have been asking for a more driver-oriented Toyota.
While it's designed to go fast in a straight line, the origin of the Camry Dragster's parts might be surprising. The 5.7-liter V8 engine, transmission, rear axle and electronics were plucked from the Toyota Tundra pickup. Toyota Racing Development donated a supercharger, while a wet-nitrous-injection system was also tacked on for that little extra something. Those goodies will help propel this anonymous looking monster through the quarter mile in just 9.8 seconds.
"This is the most extreme build we've ever unveiled at SEMA," said Toyota's motorsports chief Steve Appelbaum said in a statement. "The transformation from seemingly stock Camry to full-blown racecar just shocks the senses. Chuck Wade and the team at Motorsports Technical Center did a truly spectacular job executing the vision of this project."

Tougher than steel: Wood pulp could make lighter auto parts

KYOTO, Japan — The global push among carmakers to make ever lighter vehicles is leading some auto suppliers in Japan to turn to what seems like an unlikely steel substitute — wood pulp. Japanese researchers and auto component makers say a material made from wood pulp weighs just one-fifth of steel and can be five times stronger. The material - cellulose nanofibers — could become a viable alternative to steel in the decades ahead, they say, although it faces competition from carbon-based materials, and remains a long way from being commercially viable.> Related: Jay Leno drives the Renew cannabis car — hemp you can't dent Reducing the weight of a vehicle will be critical as manufacturers move to bring electric cars into the mainstream. Batteries are an expensive but vital component, so a reduction in car weight will mean fewer batteries will be needed to power the vehicle, saving on costs. "Lightweighting is a constant issue for us," said Masanori Matsushiro, a project manager overseeing body design at Toyota. "But we also have to resolve the issue of high manufacturing costs before we see an increased use of new, lighter-weight materials in mass-volume cars."A NEW PROCESS Researchers at Kyoto University and major parts suppliers such as Denso Corp, Toyota's biggest supplier, and DaikyoNishikawa Corp, are working with plastics incorporated with cellulose nanofibers — made by breaking down wood pulp fibers into several hundredths of a micron (one thousandth of a millimeter). Cellulose nanofibers have been used in a variety of products ranging from ink to transparent displays, but their potential use in cars has been enabled by the "Kyoto Process," under which chemically treated wood fibers are kneaded into plastics while simultaneously being broken down into nanofibers, slashing the cost of production to roughly one-fifth that of other processes. "This is the lowest-cost, highest-performance application for cellulose nanofibers, and that's why we're focusing on its use in auto and aircraft parts," Kyoto University Professor Hiroaki Yano, who is leading the research, told Reuters in an interview. The university, along with auto parts suppliers, are currently developing a prototype car using cellulose nanofiber-based parts to be completed in 2020.