2014 Toyota Camry Se on 2040-cars

Auto blog

Italian coachbuilder wraps a modern-day Citroen van in a retro skin

Italian coachbuilder Caselani resurrected an obscure, often-forgotten model from Citroen's past to offer van buyers an additional retro-styled option. Called Type HG, it's based on the current-generation Citroen Jumpy. One of the French carmaker's best-known vintage vans is the Type H, which was built with only minor changes from 1947 to 1981. It's aged into a sought-after classic that's popular as a food truck and as a camper from Paris to Sydney. Few realize Citroen planned to release a smaller model named Type G which looked almost exactly like the H but used an air-cooled flat-twin engine shared with the 2CV. Several prototypes were made, but the project was canned in favor of the 2CV-based, nine-horsepower AU van released in 1951. It's this little-known prototype that only exists in Citroen's official heritage collection and in the minds of the most indoctrinated French car enthusiasts that Caselani chose to bring into the 21st century. And, because the Type G (shown below) was a shrunken copy of the Type H from a design standpoint, making a body kit that fits the Citroen Jumpy was relatively simple. Caselani liberally borrowed styling cues from its modern version of the Type H, which is based on the larger Citroen Jumper sold as the Ram ProMaster in the United States. It adds a new-look front end with a vertical grille, chromed chevrons, and round headlights positioned as far out of the body as regulations permit, corrugated body panels, and a redesigned rear end. Whitewall tires are optionally available. Caselani offers the Type HG as a passenger van, a crew-cab van, and a panel van. Pricing starts at 29,400 euros before taxes are factored in, a sum that represents about $35,000 and that corresponds to a short-wheelbase panel model powered by a 100-horsepower, four-cylinder turbodiesel engine. Alternatively, motorists who already own a Jumpy can purchase the transformation kit on its own for 14,800 euros (about $17,500). For added peace of mind, Caselani pointed out the conversion was created with Citroen's input, and the brand authorized the kit. We know what you're thinking: what on earth is a Jumpy? Glad you asked! It's a van positioned in the middle of Citroen's commercial range. It slots between the Berlingo, which competes in the same segment as the Ford Transit Connect, and the Jumper, which is marketed as an alternative to the Ford Transit.

Toyota, Subaru developing RAV4-sized electric crossover and platform for more EVs

TOKYO — Toyota and Subaru announced they will jointly develop a battery-electric crossover on a platform developed for multiple production vehicles. The first crossover built on the platform will be a C-segment vehicle, which will be a small vehicle similar in size to a Toyota RAV4 or Subaru Forester. It will also be sold by both brands with altered styling and badging. The small crossover will only be the first vehicle to use the platform, though, as it's being developed for use in medium-small C-segment sedans and both D-segment larger sedans and crossovers. So we could see electric cars similar to the Corolla and Impreza, Camry and Legacy, and even the Highlander and Ascent on this platform in the future. Not surprisingly, this first electric crossover will have all-wheel drive, and the companies said that Subaru would provide all-wheel drive expertise with Toyota adding its electric powertrain knowledge. It's a safe bet that all of the future Subarus on the platform will have all-wheel drive, but it will be interesting to see if Toyota offers two-wheel- and all-wheel-drive iterations of its vehicles. The move to share technology underlines the conundrum facing Toyota and other global automakers, which are competing to develop new vehicle technologies including all-battery electric cars and self-driving cars, which require massive investment. "Subaru and Toyota believe that it is necessary to pursue a business model that goes beyond convention, crossing over industrial boundaries," the automakers said. Toyota is looking to partnerships with rival automakers and tech firms to reduce its capital outlay for developing these new technologies. In April, it announced it would supply other automakers with its hybrid technology, an area it has led since it pioneered the Prius in 1997. It also recently released the 2020 Toyota Supra, which shares a majority of its powertrain and chassis, among other things, with the 2020 BMW Z4. Toyota also provided hybrid development assistance to Subaru on the Crosstrek plug-in hybrid. Subaru, although experiencing massive, continual sales success, particularly in crossover and all-wheel-drive obsessed America, is still a small car company in the grand scheme of things. As such it's struggling to independently invest in and develop lower-emission vehicles and on-demand transportation services widely seen as necessary to survive technological upheaval in the global auto industry.

The 2021 F-150 elevates Ford's bed game

The new 2021 Ford F-150 is ushering in a new era of pickup capability, but there's more to it than the introduction of the PowerBoost hybrid. While that new powertrain is certainly the truck's headlining element, the supporting electrical architecture enables a level of utility that hasn't been offered in past consumer half-tons. The true party trick is Ford's new "Pro Power Onboard" feature, which is essentially a built-in generator that provides juice for the 2021 F-150's rather robust in-bed power station. This system is available even on gasoline-engine models, but its utility is maximized with the electrified powertrain. ICE models equipped with the option max out at 2.0 kilowatts, while the PowerBoost hybrid can be had with either a 2.4- or a whopping 7.2-kilowatt inverter.  The idea here is that the F-150 can essentially stand in for a high-output portable generator. In a worksite example provided by Ford, a PowerBoost model with the 7.2-kW upgrade and a single tank of fuel could provide 32 hours of power for an 1,800-watt compound miter saw, a 1,000W circular saw, a 1,200W battery charger, a 1,200W hammer drill, and a 1,000W air compressor with hundreds of watts to spare for lighting and other accessories. But even without the Pro Power Onboard option, Ford's new bed setup enables more versatility than in previous models. The new Tailgate Work Surface option adds a flat work area with integrated rulers, recesses for pencils or small tools, and even a stand for a personal device.  Ford is neither the first to offer an auxiliary power outlet in a half-ton pickup bed, nor was Ford the first to introduce a more feature-rich tailgate. GMC's MultiPro tailgate was a major innovation on that front, and while it is geared mostly toward improving the cargo utility of the bed, it can also be customized with 12-volt power and even an accessory speaker system. The Ram 1500 is also offered with both a multi-function tailgate and AC power in the bed, though the latter option is limited to models with the RamBox cargo package.  As half-ton pickups approach levels of towing and hauling capability that begin to blur lines with heavy-duty offerings, it's clear that automakers are looking for ways to differentiate themselves without stepping on their own bigger trucks' toes. These new bed and tailgate innovations may yet be the tip of the iceberg when it comes to full-size pickup versatility. Related Video: