Xl 3.0l 4-wheel Disc Brakes Abs Leather Seats Keyless Entry Automatic Headlights on 2040-cars

Auto blog

Toyota Recalling 1.67 Million Vehicles Worldwide

UPDATE: Toyota is now announcing specifically which models are covered under its fuel pipe recall in the US. The company is repairing about 423,000 Lexus models that include the 2007-2010 LS, 2006-2011 GS, 2006-2011 IS, 2010 IS C and 2008-2010 IS-F. The automaker says that it isn't aware of any fires, crashes, injuries or fatalities caused by this problem. According to Toyota, the recall is because it's possible for the fuel delivery pipes and the fuel pressure sensor to form a bad seal with the gasket between them because of a protective coating protecting against corrosion on the pipes. It's possible for this to eventually cause a fuel leak, and obviously in a hot engine bay that's a potential fire risk. To fix the problem, dealers will replace the gasket and repair the gasket seating surface between the fuel delivery pipe and the fuel pressure sensor. The company will begin notifying owners soon. You can find the official press release, below. Toyota is issuing three separate recalls covering 1.67 million vehicles worldwide with most of those models in Japan. It looks like the campaigns' impact on the US may be smaller, though. According to Reuters, Toyota isn't aware of any accidents, injuries or fatalities affecting the models. Some yet-unnamed Lexus models might also be affected. The largest of the campaigns does not currently affect any US-market vehicles. About 802,000 units of the Toyota Crown Majesta, Crown, Noah and Voxy in Japan are being repaired to replace a seal that could leak in the brake master cylinder. Those already leaking get a new brake booster, as well, according to Reuters. The only recall currently believed to affect the US is due to a problem covering approximately 759,000 vehicles with 423,000 of them here. The repair is to fix a faulty fuel delivery pipe that could cause a fire if the fuel leaks out. Unfortunately, we don't know which models it covers. Autoblog spoke to Toyota spokesperson Mona Richard and was told the information was still "under embargo." When exactly that embargo will lift isn't yet known, but we're on the case. Finally, Toyota is recalling 190,000 Corolla Rumion and Auris models in Japan for a faulty evaporative emission control unit. Autoblog is in contact with Toyota, and we'll update this story as soon as we know more about its affect on the US market.

Tougher than steel: Wood pulp could make lighter auto parts

KYOTO, Japan — The global push among carmakers to make ever lighter vehicles is leading some auto suppliers in Japan to turn to what seems like an unlikely steel substitute — wood pulp. Japanese researchers and auto component makers say a material made from wood pulp weighs just one-fifth of steel and can be five times stronger. The material - cellulose nanofibers — could become a viable alternative to steel in the decades ahead, they say, although it faces competition from carbon-based materials, and remains a long way from being commercially viable.> Related: Jay Leno drives the Renew cannabis car — hemp you can't dent Reducing the weight of a vehicle will be critical as manufacturers move to bring electric cars into the mainstream. Batteries are an expensive but vital component, so a reduction in car weight will mean fewer batteries will be needed to power the vehicle, saving on costs. "Lightweighting is a constant issue for us," said Masanori Matsushiro, a project manager overseeing body design at Toyota. "But we also have to resolve the issue of high manufacturing costs before we see an increased use of new, lighter-weight materials in mass-volume cars."A NEW PROCESS Researchers at Kyoto University and major parts suppliers such as Denso Corp, Toyota's biggest supplier, and DaikyoNishikawa Corp, are working with plastics incorporated with cellulose nanofibers — made by breaking down wood pulp fibers into several hundredths of a micron (one thousandth of a millimeter). Cellulose nanofibers have been used in a variety of products ranging from ink to transparent displays, but their potential use in cars has been enabled by the "Kyoto Process," under which chemically treated wood fibers are kneaded into plastics while simultaneously being broken down into nanofibers, slashing the cost of production to roughly one-fifth that of other processes. "This is the lowest-cost, highest-performance application for cellulose nanofibers, and that's why we're focusing on its use in auto and aircraft parts," Kyoto University Professor Hiroaki Yano, who is leading the research, told Reuters in an interview. The university, along with auto parts suppliers, are currently developing a prototype car using cellulose nanofiber-based parts to be completed in 2020.

See how Toyota Mirai hydrogen fuel cell car is made [w/videos]

Toyota kicked off production of the Mirai hydrogen fuel cell sedan at its Motomachi factory campus in December, and at the time the company had orders for 200 of them. In just the few months since then, demand has already jumped to requests for at least 1,500 of the potentially revolutionary vehicles. For the first time, the Japanese brand is taking viewers into the innovative model's production process and showing the sedate pace of putting them together. The line used for the Mirai was formerly home to Lexus LFA production. Like that low-volume, cutting-edge supercar, Toyota is prioritizing quality and precision for its fuel cell vehicle. At the moment, it's building just three of the sedans per day with a tight, dedicated team. According to Automotive News, there are just 13 people assembling the cars right now, and at most they could only complete 10 per day. The production process for the Mirai is more akin to a boutique sportscar than the high-volume efficiency Toyota usually shows. There's no belt moving them along, and instead each one is pushed between areas. With so much riding on these models, this approach is meant to guarantee an attention to quality. "These facilities are not so advanced. Rather, we rely on the work of our skilled employees. This is similar to how things were when Toyota was just starting out," said Toyota President Akio Toyoda during a ceremony at the plant, according to Automotive News. Toyota has released a gallery of images and five videos showing the major steps in the Mirai's production process, including the complicated installation of the fuel cell stack. All of the clips are embedded below. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.