Toyota Avalon 55k Mi Heated Leather Sunroof V6 Rear Camera Key Less Start Loaded on 2040-cars

Auto blog

Sports 800 is a progenitor of Toyota performance

There's an automotive axiom that claims it's more fun to drive a slow car fast, than a fast car slow. If that's the case, then pushing a Toyota Sports 800 around must be one of the most exhilarating experiences behind the wheel in the world. With just 800cc of displacement from a two-cylinder boxer engine, the focus is on finesse over outright speed. Still, it's a fantastic page in Toyota's performance history, and Petrolicious takes a ride with a man who owns a meticulously restored 1967 example in its latest video.
The Sports 800 used the classic cost-saving strategy in the auto industry of taking parts from a standard model in the lineup and modifying it into a sports car. In this case that meant borrowing the engine from the plebian Toyota Publica, beefing it up for more power and clothing the whole thing a in beautifully shaped, wind-tunnel-honed body.
The look of these lithe, targa roadsters is the exact opposite of the rather dull styling sometimes associated with Toyota today. Everywhere you look there are louvers, vents or curves to draw the eye. Check out the latest Petrolicious video for a detailed look at the history of this rare model that's largely unknown on this side of the Pacific.

Toyota, Lexus dominate KBB's Best Resale Value Awards

Toyota and Lexus stormed the 2014 Kelley Blue Book Best Resale Value Awards, winning a combined 18 categories including best brand and best luxury brand. This marks the third year in a row that both automakers have won the Brand and Luxury Brand resale value awards. In all, Toyota won 11 categories and Lexus won seven.
Honda made a good showing, as well, winning two segments (Accord Plug-In Hybrid and Civic Si) and putting one car on the top-10 Best Resale Value list (CR-V). Chevrolet did even better, winning two segments (with the V6 Camaro and the Corvette) and placing three cars on the top-10-overall list (again, the Camaro and Corvette, plus the Silverado 1500).
The other winners came from Jeep, Dodge, Infiniti, Subaru and Audi. To give you a clearer picture of the Toyota and Lexus domination, their 18 mentions represents more than half of the 34 awards (including the top-10-overall list).

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.