Power Sunroof Dual Zone Climate Control on 2040-cars

Auto blog

Solid-state batteries: Why Toyota's plans could be a game-changer for EVs

Word out of Japan today is that Toyota is working on launching a new solid-state battery for electric vehicles that will put it solidly in the EV game by 2022. Which leads to a simple question: What is a solid-state battery, and why does it matter? Back in February, John Goodenough observed, "Cost, safety, energy density, rates of charge and discharge and cycle life are critical for battery-driven cars to be more widely adopted." And risking a bad pun on his surname, he seemed to be implying that all of those characteristics weren't currently good enough in autos using lithium-ion batteries. This comment is relevant because Goodenough, professor at the Cockrell School of Engineering at the University of Texas at Austin - it so happens, he turns 95 today - is the co-inventor of the lithium-ion battery, the type of battery that is pretty much the mainstay of current electric vehicles. And he and a research fellow at U of T were announcing they'd developed a solid-state battery, one that has improved energy density (which means a car so equipped can drive further) and can be recharged more quickly and more often (a.k.a., "long cycle life") than a lithium-ion battery. (Did you ever notice that with time your iPhone keeps less of a charge than it did back when it was shiny and new? That's because it has a limited cycle life. Which is one thing when you're talking about a phone. And something else entirely when it involves a whole car.) What's more, there is reduced mass for a solid-state battery. And there isn't the same safety concern that exists with li-ion batteries vis-a- vis conflagration (which is why at airplane boarding gates they say they'll check your carryon as long as you remove all lithium-ion batteries). Lithium-ion batteries may be far more advanced than the lead-acid batteries that are under the hood of essentially every car that wasn't built in Fremont, Calif., but as is the case with those heavy black rectangles, li-ion batteries contain a liquid. In the lithium-ion battery, the liquid, the electrolyte, moves the lithium ions from the negative to the positive side (anode to cathode) of the battery. In a solid-state design, there is no liquid sloshing around, which also means that there's no liquid that would freeze at low operating temperatures. What Toyota is using for its solid-state battery is still unknown, as is the case for the solid-state batteries that Hyundai is reportedly working on for its EVs.

Foreign automakers pay from $38 to $65 per hour to non-union workers

As leaders for the United Auto Workers gather in Detroit for their Special Convention on Collective Bargaining to work out the negotiating stance for this year's new labor agreements with the Detroit 3 automakers, what they most want to do is figure out how to eliminate the two-tier wage scale. However, the lower Tier 2 wage has allowed the domestic automakers to reduce their labor costs, hire more workers, and compete better with their import competition. As it stands, per-hour labor rates including benefits are $58 at General Motors, $57 at Ford, and $48 at Fiat-Chrysler – a reflection of FCA's much greater number of Tier 2 workers. The Center for Automotive Research released a study of labor rates (including benefits) that put numbers to what the imports pay: Mercedes-Benz pays the most, at an average of $65 per hour, Volkswagen pays the least, at $38 per hour, and BMW is just a hair above that at $39 per hour. Among the Detroit competitors, Honda workers earn an average of $49 per hour, at Toyota it's $48 per hour, Nissan is $42 per hour, and Hyundai-Kia pays $41 per hour. The lower import wages are aided by their greater use of temporary workers compared to the domestics. Automotive News says the ten-dollar gap between those foreign camakers and the domestics turns out to about an extra $250 per car in labor, which adds up quickly when you're pumping out many millions of cars. That $250-per-car number is one that, come negotiating time, the Detroit 3 will want to reduce, as the UAW is trying to raise both Tier 1 and Tier 2 wages. Another wrinkle is that the domestic carmakers are considering the wide adoption of a third wage level lower than Tier 2. Some workers who do minor tasks like assembling parts trays kits and battery packs already make less than Tier 2, but the UAW will be quite wary about cementing yet another wage scale at the bottom of the system while it's trying to fight a bigger battle at the top. News Source: Automotive News - sub. req., BloombergImage Credit: AP Photo/Erik Schelzig Earnings/Financials UAW/Unions BMW Chevrolet Fiat Ford GM Honda Hyundai Kia Mercedes-Benz Nissan Toyota Volkswagen labor wages collective bargaining labor costs

Toyota recalling small number of 2014 FJ Cruisers for possible steering failure

Toyota is issuing a fairly tiny recall to fix a potentially serious problem in the FJ Cruiser. The company is recalling about 120 examples of the rugged SUV from the 2014 model year because the steering can fail. According to Toyota, the intermediate shaft that connects the steering wheel and steering gear box might not be welded correctly and can separate. If this happens, drivers lose steering control, which is obviously a major safety concern. However, the automaker is not aware of any crashes, injuries or fatalities from the problem. On the small number of affected models, Toyota will replace the intermediate shaft with a new one. TOYOTA RECALLS CERTAIN 2014 MODEL YEAR FJ CRUISER VEHICLES TORRANCE, Calif., February 5, 2015 – Toyota Motor Sales, U.S.A., Inc., today announced it will conduct a safety recall of approximately 120 Model Year 2014 FJ Cruiser vehicles. The steering system contains an intermediate shaft, which connects the steering wheel to the steering gear box. In the involved vehicles the intermediate shaft could have received an inadequate weld. Under some circumstances, the weld could separate, resulting in the loss of steering control and increasing the risk of a crash. Toyota is not aware of any crashes, injuries, or fatalities caused by this condition. Owners of the involved vehicles will receive a notification by first class mail. Toyota dealers will replace the intermediate shaft. Detailed information is available at www.toyota.com/recall and by calling Toyota Customer Service at 1-800-331-4331.