2014 Toyota 4runner Sr5 Premium on 2040-cars

Auto blog

Toyota recalls 2016 RAV4, RX350, and ES350 for stability failure

The Basics: Toyota will recall 4,170 examples of the 2016 RAV4, 90 units of the 2016 Lexus RX350, and 12,400 units of the 2016 ES350. The Problem: A component in the brake actuator assembly may have damage from a manufacturing error. The actuator controls the anti-lock brakes, traction control, stability control, and other systems. If the part doesn't work properly these safety systems might not activate properly. Accidents/Injuries: Toyota spokesperson Amanda Rice told Autoblog, "Regarding the recent recalls, alleged crashes, injuries, and fatalities are reported in many ways to many different organizations. We are not providing specifics at this time." The Fix: Dealers will check the brake actuator's serial number and will replace it if the part comes from a period when the damage could have happened. If you own one: Toyota will contact affected owners by mail. Related Video: TOYOTA RECALLS CERTAIN 2016 MODEL YEAR RAV4 AND LEXUS RX AND ES VEHICLES TORRANCE, Calif., April 6, 2016 – Toyota Motor Sales, USA, Inc. today announced that it is recalling approximately 4,170 Model Year 2016 Toyota RAV4; approximately 90 Model Year 2016 RX350; and approximately 12,400 Model Year 2016 ES350. The involved vehicles are equipped with a Brake Actuator assembly that enables enhanced brake control functions including the Anti-lock Braking System (ABS), Traction Control (TRAC), and Vehicle Stability Control (VSC), among others. There is a possibility that a component inside the actuator could have been damaged during manufacturing, preventing the actuator from operating properly. This could cause a loss of vehicle stability control, increasing the risk of crash. All known owners of the affected Toyota vehicles will be notified by first class mail. Toyota and Lexus dealers will check the serial number of the Brake Actuator and replace actuators assembled during a specific production period. Information about automotive recalls, including but not limited to the list of involved vehicles, is subject to change over time. For the most up-do-date Safety Recall information on Toyota, Lexus or Scion vehicles, customers should check their vehicle's status by visiting toyota.com/recall and entering the Vehicle Identification Number (VIN). Safety Recall inquiry by individual VIN is also available at the NHTSA site: safercar.gov/vin.

Are Toyota and Lexus planning to use Mazda's straight-six and new platform?

Japan's Best Car magazine has what appears to be a whopper of a rumor. The mag said it scooped Mazda's development of a straight-six engine that Mazda only revealed in March, the carmaker having buried the information in a financial statement. By way of Lexus Enthusiast and according to Google translate, Best Car writes that as it was speaking to a Toyota source on an unrelated matter, the magazine found out that Mazda's work on the straight-six was predicated on the engine's use in Toyota Group vehicles, which includes Lexus. Here's the account of how the engine and Mazda's coming front-engined rear-drive platform, dubbed "Large Architecture," will make their way to Toyota City: The first appearance for the straight-six, predicted to come in at a hair under 3.0 liters, is the Mazda Atenza/Mazda6 successor coming around 2022. The powertrain will get a 48-volt hybrid system for increased fuel economy, and the automaker's said to be considering a plug-in hybrid version. Toyota's first shot at the platform and the straight-six will be whatever fills the slot of the Japanese-market Mark-X sedan. We once had a version of the Mark-X in the U.S. as the Toyota Cressida. In Japan, it's sold as a rear- and all-wheel drive option to the Camry. The Mark-X is slated to end production in December this year — a "sporty four-door coupe" on Mazda's platform and with Mazda's engine eventually taking its place. Lexus has a number of plans for the components from Hiroshima. The next Lexus IS is said to evolve from the current sedan, using a Lexus V6 but migrating to Toyota's TNGA platform. Best Car says the IS after that, perhaps sometime around 2026, will hop onto Mazda's new platform and use the inline-six engine. Before that, the replacement for the Lexus RC in 2022 will sit on the Mazda platform and get that inline-six. What's more, Lexus will introduce a new model to slot between the $64,750 RC and the $92,950 LC employing Mazda's architecture and engine. Best Car says the model will act as a "next car" for RC owners, but we can't tell if the magazine means a two-door or a four-door coupe; the article also says the Lexus model will compete with the Audi A7. Toyota and Mazda partnered up in 2016 on technology sharing. Best Car's take is that, as was done on the Supra, Toyota is picking up all the tech it can from suitable sources so that it can continue to sell models that don't make sense to develop alone.

Post-earthquake, Toyota prepares to reopen some plants in Japan

Toyota will restart vehicle production at most of its closed factories in Japan next week, but the factories that build the Mirai and many Lexus models will remain closed through at least April 28 and possibly longer. The earthquakes around the city of Kumamoto on the island of Kyushu forced the automaker to stop most of its assembly throughout the country due to a lack of parts supply. Toyota will reopen the plants in phases from April 25 to 28. However, the Motomachi factory with its LFA works, which makes the Mirai, and the Miyata factory will remain closed. These sites also build the Lexus NX, RX, ES, GS, and CT, according to Toyota. The automaker didn't say when production would begin again or how this would affect vehicle supply. "In the update, we received this morning from TMC, they said that at this stage it is too soon to tell what the impact on production will be, so we can't say yet whether there might be vehicle shortages in the US," spokesperson Aaron Fowles told Autoblog. While the quakes were focused on Kyushu, they damaged Aisin Seiki factories, which supplied parts to Toyota plants across the country. The automaker worked with its partner to import the necessary components from China and Mexico, and Aisin started moving molds from the damaged plants to operational ones in Japan, which gets production under way sooner. Automotive News Europe estimates the week of lost production cuts total assembly by 90,000 vehicles. It could cost Toyota the equivalent of $458.2 million to $641.5 million. The company could make up some of the losses through overtime. Toyota says these plans are subject to change because on ongoing tremors in the region, which could cause more damage. Reuters reported there was a magnitude 5.5 aftershock in the Kumamoto area on April 19. So far, the quakes have killed at least 47 people and around 100,000 people have moved to evacuation centers. Toyota to Restart Production on Vehicle Assembly Lines in Japan from April 25 Apr. 20, 2016 Toyota City, Japan, April 20, 2016-Between April 25 and 28, Toyota will restart production on most of its vehicle assembly lines in Japan. On April 17, Toyota announced that, due to parts shortages resulting from the severe earthquakes that struck Japan's island of Kyushu last week, production would be suspended on almost all of its vehicle assembly lines in stages between April 18 and 23.