2 Owners 6 Cylinder Man Transmission 4x4 Air Conditioning Awd Loaded Cheap P/s on 2040-cars

Auto blog

2015 24 Hours of Le Mans live race report

Check back regularly for more race updates every few hours. No, you don't need to stay up for the entire 24 Hours of Le Mans, but if you want to catch any of the action, Autoblog friend Reilly Brennan has a handy guide. And to keep you up to speed on the latest race events, we'll be posting live from Le Mans with regular race reports.Hour 1: Five laps in, Audi breaks up the three Porsches at the front, with the #19 919 Hybrid, driven by Nico Hulkenburg, passed by all three R18s. Hulkenburg eventually took back fifth position only to fall back again after the first pit stop. Meanwhile, clutch trouble kept the #23 Nissan GTR-LM in the pits until 15 minutes into the race. The other two Nissans were forced to start at the back of the grid after failing to the meet the 110 percent qualifying speed regulation. At the end of the first hour, just 7.5 seconds separated the first six cars. Then the factory team #92 Porsche GTE car caught fire, with the the #13 Rebellion P1 car taking frontal damage in the ensuing carnage. With the safety car out, the field is once again bunched up.Hour 2: The slugfest between Audi and Porsche continues, with neither side backing off. Halfway through the second hour the #7 R18 passes both leading Porsches for the top position. After another round of pits stops Porsche regains the lead until lap 30, when the Audi overtake once again and quickly pulls out a three-second gap. Nico Hulkenburg passes the other two Audis to join his Porsche teammates. At the beginning of the third hour it's Audi #7, Porsche #17, #18, and #19, followed by Audi #8 and #9. 33 seconds separates this group, with Toyota a minute back from the front car.Hour 3: On track the action refuses to stop. Although it's early, Audi is looking strong with the overall lead in the #7. What's more is that the Audis run four stints per set of tires, while the Porsche cars have to change rubber every third stop. But after a quick refueling, the lead R18 gets a tire puncture and comes back in 3 laps later, allowing Porsche to take over the top two spots. Then as the hour closes out a yellow flag causes traffic to bunch up and the #8 Audi gets stuck with nowhere to slow down. Driver Loic Duval dives for the side of the road but hits the guard rail and careens across the track, damaging the front and rear bodywork. The rest of the car is still intact, though, and once in the pits Audi replaces the entire front and rear of that in only three minutes.

Scion trying to build business case for FR-S convertible as Subaru bows out

Hope may remain for a convertible version of the Scion FR-S, according to a report from Ward's Auto. You'll recall that rumors were swirling about the feasibility of a rear-drive Toyobaru convertible as early as October, and that back in November, Subaru - which makes the FR-S, Subaru BRZ and Toyota GT86 - essentially nixed the idea of an open-topped variant.
"We make the car, so if we don't make it, it can't happen," brand chief Yasuyuki Yoshinaga told Automotive News, according to Ward's, at the Tokyo Motor Show. "Our engineering department told me that losing the entire roof requires a complete redesign of the structure. It would need a big change."
Despite Yoshinaga-san's arguments against a droptop variant, Toyota is apparently still considering the model. Speaking to media at the 2014 North American International Auto Show, Scion's US vice president, Doug Murtha, hinted that the rear-drive droptop was in the works.

Tougher than steel: Wood pulp could make lighter auto parts

KYOTO, Japan — The global push among carmakers to make ever lighter vehicles is leading some auto suppliers in Japan to turn to what seems like an unlikely steel substitute — wood pulp. Japanese researchers and auto component makers say a material made from wood pulp weighs just one-fifth of steel and can be five times stronger. The material - cellulose nanofibers — could become a viable alternative to steel in the decades ahead, they say, although it faces competition from carbon-based materials, and remains a long way from being commercially viable.> Related: Jay Leno drives the Renew cannabis car — hemp you can't dent Reducing the weight of a vehicle will be critical as manufacturers move to bring electric cars into the mainstream. Batteries are an expensive but vital component, so a reduction in car weight will mean fewer batteries will be needed to power the vehicle, saving on costs. "Lightweighting is a constant issue for us," said Masanori Matsushiro, a project manager overseeing body design at Toyota. "But we also have to resolve the issue of high manufacturing costs before we see an increased use of new, lighter-weight materials in mass-volume cars."A NEW PROCESS Researchers at Kyoto University and major parts suppliers such as Denso Corp, Toyota's biggest supplier, and DaikyoNishikawa Corp, are working with plastics incorporated with cellulose nanofibers — made by breaking down wood pulp fibers into several hundredths of a micron (one thousandth of a millimeter). Cellulose nanofibers have been used in a variety of products ranging from ink to transparent displays, but their potential use in cars has been enabled by the "Kyoto Process," under which chemically treated wood fibers are kneaded into plastics while simultaneously being broken down into nanofibers, slashing the cost of production to roughly one-fifth that of other processes. "This is the lowest-cost, highest-performance application for cellulose nanofibers, and that's why we're focusing on its use in auto and aircraft parts," Kyoto University Professor Hiroaki Yano, who is leading the research, told Reuters in an interview. The university, along with auto parts suppliers, are currently developing a prototype car using cellulose nanofiber-based parts to be completed in 2020.