2008 Suzuki Grand Vitara Xsport 4wd Damaged Salvage Runs! Low Miles Wont Last!! on 2040-cars

Auto blog

The Suzuki Jimny pickup truck might be the best Jimny

Suzuki showed off a Jimny pickup truck concept at the 2019 Tokyo Auto Salon, and it garnered more positive hype for the already beloved new-generation 4x4. But more than a year later, there are no signs that a production version is coming in the immediate future, if at all. So, members of the aftermarket are building their own. Shropshire Quads out of the United Kingdom takes regular Jimny SUVs and converts them into pickups by lifting the vehicle and adding a metal tub to the rear. Shropshire Quads has been building Jimny pickups for years. The company started doing the conversions on used models but has since grown to add the new Jimny to the operation, as well. Here's how it all started:  We are a small family run business based near Cleobury Mortimer in South Shropshire. We are main agents for Arctic Cat and Kymco ATVs. We felt that there was a niche gap in the agriculture/land management sector for a small lightweight pickup with more creature comforts and reliability than your usual UTVs. We went in search, and following lots of research, we decided that the Suzuki Jimny would be the ideal base vehicle. We now convert quality, low mileage Suzuki Jimny's to pickups using the best quality, factory designed and manufactured components. We hope you agree that we offer the best Suzuki Jimny Pickup on the market. The blue example seen here is the shop's first conversion on a new Jimny. According to Farmer's Weekly, Shropshire Quads orders the factory-manufactured kit that was designed for Suzuki from Austria and is the sole distributor and installer in the United Kingdom. Somebody in New Zealand is running a similar operation. As seen in the photos, the kit can only be installed once the rear portion of the Jimny is chopped off. The kit includes a metal rear bulkhead panel that is equipped with a heated rear screen. Plastic side moldings smooth out the conversion into the bed, which is made of stainless steel and aluminum. The rear tailgate is removable, and Shropshire Quads says the kit uses strong high-quality latches. A recessed fuel filler is mounted with cast aluminum and found on the driver's side. As this is a conversion intended for labor, it can be ordered with a one-inch lift or a three-inch lift. For added utility, the Jimny can be fitted with flotation tires or smaller all-terrain tires. The Jimny was already cool, and having one on the farm sounds like a fun way to do chores.

Land-speed racer Bill Warner dies from motorcycle crash at 285 MPH

Motorcycle land-speed record holder Bill Warner died yesterday after crashing during an attempt at setting another record. The 44-year-old was clocked at 285 miles per hour on the runway of a former air base in northern Maine, before he lost control of his modified Suzuki Hayabusa motorcycle and veered off the runway.
It is not known what speed he was traveling when things started to go wrong and unclear what caused the crash, which happened shortly before 10:00 AM. Warner's crew suspect there were mechanical difficulties on his last run, in addition to a slight breeze, according to the video news report. Warner was conscious and able to speak after the crash but died an hour and 15 minutes later at a hospital in Caribou. The event and runway were closed for the rest of the day as police investigated the incident.
Warner was participating in "The Maine Event" at Loring Air Force Base in an attempt to reach 300 mph in one mile. Warner's best land-speed record, set in 2011, was 311.945 mph in 1.5 miles on the same runway, according to the Loring Timing Association, a record that still stands today for open-cockpit motorcycles. After that run, Warner said the scariest part was stopping the bike before the end of the runway. Be sure to check out the video news report after the jump.

Japanese motorcycles moving into forced induction

While turbocharging and supercharging may be nothing new in the automotive industry, motorcycle engines are almost always naturally aspirated. But even that's beginning to change. At the Tokyo Motor Show last week, two major Japanese companies showed off new forced-induction motorbike engines.
Kawasaki rolled in with a supercharged four-cylinder motorbike engine. It offered little in the way of details, disclosing only that the turbine blades were developed in-house to withstand the heat and vibration of spooling up at motorbike speeds.
Suzuki is taking a different approach, however. Its Recursion concept bike packs a turbocharged 588cc two-cylinder engine with a turbocharger and intercooler. The compact package churns out just under 100 horsepower and 74 pound-feet of torque, packaged into a motorbike that weighs just 384 pounds dry.