2021 Subaru Xv Crosstrek Limited Cvt on 2040-cars

Auto blog

2015-18 Subaru Foresters recalled because front airbag may not deploy

Subaru is recalling 366,282 Foresters from model years 2015-18 because the front passenger airbag may not go off when it should during a crash. The problem stems from Subaru’s “Occupant Detection System,” which may not be able to detect a person sitting in the seat due to a loose connection. ThereÂ’s an electrical connection under the passenger seat that may loosen over time, according to Subaru. That connection is necessary for the detection system to function. Subaru says that only cars equipped with heated front seats are subject to this recall, as those are the only ones equipped with the specific harness where this would be possible. If your Forester is experiencing this problem, Subaru says you may see the “airbag warning” light illuminate on your dash. The “Passenger airbag off” indicator will also be illuminated, so that makes two different lights to check to see if your airbag is working. In turn, the seat wonÂ’t recognize the presence of a person in the front passenger seat, and the airbag may not deploy in a crash. Subaru will inspect the vehicles it recalls and replace the sensor mat harness if necessary. If you own a 2015-2018 Forester with heated front seats, look out for a note in the mail informing you of a recall. YouÂ’ll need to take the car in to the dealer, where the recall work will be done free of charge. As of now, Subaru isnÂ’t aware of any injuries or fatalities associated with this problem.

2020 Subaru Outback Suspension Deep Dive | More than meets the eye

The 2020 Subaru Outback is a completely redesigned car. It has a lot to offer in terms of new convenience features, and the driving experience is much improved. A good deal of that comes from chassis improvements, and indeed a lot of work went into making the body shell and suspension subframes more rigid so the suspension attachment points could be more robust and stable. Don’t let all of that rigidity talk make you think the ride itself is stiff. It isnÂ’t. Any suspension tuning engineer will tell you that a stable platform is necessary even if a smooth ride is the goal. Rigid attachment points make it easier to control ride motions and road imperfections within those components designed for that very job – the springs, dampers and suspension bushings. So letÂ’s take a look at what Subaru has done under the new Outback. What weÂ’re about to see doesnÂ’t just apply to the Outback wagon, but to the closely-related and also-redesigned 2020 Legacy sedan as well.   ItÂ’s no surprise that a vehicle like the Subaru Outback uses strut front suspension, but from here, a couple of details do look curious.   Like any strut suspension, the steering axis (yellow line) is defined by the pivot bushing at the top of the strut and the center of the lower ball joint. The entire affair will pivot about this line when the wheels are turned. The lower control arm (red) of the newly redesigned 2020 Outback is now a lightweight aluminum piece instead of the steel hunk that was used last year. As before, thereÂ’s a “direct-acting” stabilizer bar link (green) that attaches to the strut housing, an arrangement that maximizes the efficiency of the stabilizer bar because the motion ratio is 1-to-1 motion with respect to wheel movement. As for the stabilizer bar itself, itÂ’s now hollow to save a bit of weight.   This spacer (yellow) raises the body relative to the suspension. The Outback has one, but the lower-riding Legacy sedan does not. The spacer pushes the arm down (or the body up - take your pick), so that means the OutbackÂ’s reinforcing bracket (green) will also differ from that of the Legacy. While weÂ’re here, look at the round rubber bushing just below the spacer. That void space and square nub you see pointing directly at you will make sense in a short while.   Subaru couldnÂ’t simply put a spacer on the OutbackÂ’s rear lower control arm pivot and call it good. They had to do something of similar magnitude at the front.

Subaru WRX hatchback back off the table

It's fair to see we're rather fond of the new Subaru WRX. That's not to say we don't have a number of issues with the budget sports sedan, though. Foremost among those complaints is that it's short exactly one door. Yes, the sedan-only WRX is just fine, but we'd be lying if we said we weren't missing the long-roofed, five-door model of years past. More pressing than our sentimentality, though, is the business case for a WRX wagon - half of the 2013 WRX and STI models sold had five doors. As a general rule, ignoring half of your former customers isn't the best strategy for long-term success. There was some hope, as recently as a few weeks ago, though, that Subaru would right this wrong and offer a real, five-door WRX. An Australian reporter managed to corner project manager Masuo Takatsu, who said strong interest from the US meant that the Subaru mothership was considering a WRX with a hatch rather than a trunk. Sadly, that doesn't seem to be the case, as Subaru USA is dashing any and all hope of a second body style. According to Motor Trend, the company's US arm reached out to Japan and, despite the statements made by Takatsu, confirmed that there were no plans for a WRX wagon. Sigh...