2022 Subaru Outback Premium on 2040-cars

Auto blog

Subaru WRX S4 STI Sport # is a sharper, limited-edition WRX for Japan only

Depending on your nationality, age, and interests, the first association for the # symbol could be pound — for weight or the telephone, number, plain old hash or hashtag, or sharp for the musically inclined. Subaru Japan intends that last meaning for its new WRX S4 STI Sport #, because this is a sharper version of the mass-produced WRX S4 STI Sport introduced to the top of the range last year. Of note, this vehicle is a standard WRX, not a full-beans WRX STI. The differentiator is the "STI Sport" designation, which has also been applied to the Japan-market Levorg and BRZ, representing a model developed with input from Subaru Tecnica International. Last year's flagship trim picked up STI-tuned Bilstein DTMatic II inverted struts at front, STI-tuned conventional springs and dampers in back, 18-inch black wheels to go with black trim pieces like mirror caps and decklid spoiler, and a special interior with Bordeaux leather and ultra suede. Output from the 2.0-liter four-cylinder Boxer motor was left unchanged from the WRX S4 at 296 horsepower and 295 pound-feet of torque, shifting through the automaker's Sport Lineartonic CVT. The sedan costs 4,093,200 yen ($38,050 U.S.). The limited-edition WRX S4 STI Sport # displays a keener edge thanks to three STI components tested on the division's Nurburgring race cars — a flexible front tower bar, and flexible draw stiffeners for front and rear. All three components have been available on the aftermarket for a while, but their stock fitment is apparently new. The flexible tower bar looks like a typical strut tower reinforcement, but a pillow ball joint in its middle provides vertical elasticity. The bar maintains rigidity across the vehicle, but when the suspension needs a little give to work up and down, the pillow ball joint allows that. The flexible draw stiffeners are adjustable rods that connect a longitudinal frame member to a component on the cross-member, increasing chassis stiffness. STI says the three parts deliver faster steering response, reduced roll speed, and improved wheel tracking in the case of road ruts or crosswinds without compromising suspension suppleness. The Boxer sees some tweaks like a freer-breathing air filter and exhaust that raise torque by up to 10%, and sharpen throttle response. Thicker sound insulation in the floor and extra vibration-damping material in the spare tire well cut road noise for all occupants.

Is the Subaru BRZ STI being teased really only a tS version?

Teaser images of a purported Subaru BRZ STI were uncovered last night and sent the internet into a collective state of hysterics. That's not hugely surprising, though, considering the reverence that the BRZ, along with its fraternal twins, the Scion FR-S and Toyota GT86, have garnered from the automotive media. The sole sticking point, really, has been its mere 200 horsepower. People have been chomping at the bit over a higher output version of the sublime rear driver.
Those same people may be in for a disappointment, though. See, the BRZ STI that was teased last night might not be a real STI. Instead, it's looking like it might be a BRZ tS. According to 7Tune.com, the timing of the photos posted on Subaru's website lined up with Subaru's 86 Festival at Fuji Speedway, where the Subaru BRZ tS debuted. Despite wearing STI badges, the tS isn't the full-tilt STI model we've been hoping for. Instead, you can think of the relationship between tS models and STI models as sort of like the difference between a BMW 3 Series M Sport and a BMW M3.
Certainly, the speccing of the tS supports that idea. The engine of the BRZ remains untouched in both tS models, which is one of the primary things we expect a full-bore STI to address. A number of interior and exterior styling items have been added, along with Bilstein suspension pieces and six-pot Brembo brakes. The tS sports two different trim levels, with the higher end using Recaro seats, black alloy wheels, and a carbon-fiber rear spoiler. The base tS features silver wheels, standard seats, and all the same suspension and brake upgrades. Adding fuel to the fire that these are not the true STI models is the limited production run - Subaru will only build 750 tS cars.

2015 Subaru WRX priced from $26,295*, STI from $34,495*

As you read these words, we're putting together our full First Drive report on the 2015 Subaru WRX STI. And back in December, we were given our first shot behind the wheel of the wingless 2015 Subaru WRX. Both cars will launch at the same time, hitting dealers this spring, and Subaru has now confirmed that pricing will start at $26,295 for the standard WRX, and $34,495 for the hotter STI, with both models subject to a *$795 for destination fee.
On the WRX, that price gets you a 2.0-liter turbocharged four-cylinder engine good for 268 horsepower and 258 pound-feet of torque, mated to a six-speed manual transmission. There are three trim levels available - base, Premium and Limited - the latter of which will retail for $28,495 and $29,995, respectively. Premium and Limited models are also available with a new continuously variable transmission (it isn't bad - seriously), and the two-pedal setup adds $1,200 to the sedan's bottom line. Premium models add things like heated seats and mirrors, a sunroof, foglamps and a rear spoiler. The high-zoot Limited trim adds leather seating, a power driver's seat and automatic LED headlamps.
And then there's the STI, which, at $34,495, carries the same base price as the previous model. Like the standard WRX, the STI is a sedan-only affair, but boasts extensive chassis and powertrain upgrades (stay tuned for our full drive report next week). Under the hood is a turbocharged, 2.5-liter boxer-four, producing 305 hp and 290 lb-ft of twist, mated exclusively to a six-speed manual transmission.