2014 Subaru Outback 3.6r Limited on 2040-cars

Auto blog

Subaru WRX STI Type RA NBR Special is nearly as fast as a Porsche 918 Spyder at the Nurburgring

Subaru now claims to have the fastest sedan to circle the Nurburgring. Its (deep breath) WRX STI Type RA NBR Special finished a lap of the famed German racetrack in an incredibly fast 6:57.5. That's just half a second behind the Porsche 918 Spyder hypercar. Of course, this WRX STI is a specially-built racecar, a rather distant cousin of the WRX STI Type RA production car that takes its name from this race car. The Type RA NBR Special is an upgraded version of the car Subaru took to the Isle of Man time trial last year, where it broke Subaru's old record. The car was built by Prodrive, and it features a 2.0-liter turbocharged flat-four made for rally use. It now makes over 600 horsepower at 8,500 rpm, which is 50 more than it made last year. The aerodynamic aids have been updated, and they provide 650 pounds of downforce at the car's top speed. The car still has the power-adjustable rear wing from last year. At the press of a button, the driver can change the angle of the rear wing to reduce drag and increase speed on straights. Supporting the power and aerodynamic upgrades are 9-inch wide slick tires at each corner, and a rally-spec sequential transmission that can shift gears in 20 to 25 milliseconds. Related Video:

2020 Subaru Outback Roof Rack Driveway Test | Double cross

There is only one vehicle on the market with a roof rack system like the 2020 Subaru Outback. Literally everything else has either flush-mounted or raised rails where some form of crossbars are connected with "towers" (OK, so there's whatever you'd call this on the 4Runner TRD Pro). While car manufacturers will sometimes include crossbars, quite often it's left to the accessory catalog or third-party companies such as Yakima and Thule. In any event, keeping crossbars on your car regardless of how they are affixed increases wind noise and can harm fuel economy. They can also sully the view out your sunroof, but that's obviously a lesser concern. The Outback doesn't have to worry about any of that, including buying aftermarket pieces. Its roof rails are the crossbars. Making this transformation could not be easier. Simply lift up on a little tab, pull the rail out of its round socket and swing it over to the other side. Repeat with the other bar. Plug the rail into a socket on the opposite side. Done. You have crossbars.  Compare that to the process of mounting the Yakima Timberline towers and bars on my 2013 Audi Allroad.  Find bars and towers in garage. Move Christmas tree. Find special Yakima screwdriver thingy. Line up bars to roughly the 32-inch gap Yakima products are designed to fit to. Wrap rubber "band" connectors around the raised side rails and tighten two screws with Yakima screwdriver thingy. Repeat three more times. Of course, none of that is especially hard. In fact, it's incredibly easy and intuitive once you've set the bars/towers up to fit your car. It is, however, far more time consuming than what you can accomplish in the Outback. You're less likely to take them off, which again, isn't ideal. Here is another advantage of the Outback's racks. Although other Subarus have these, they are nevertheless unique to the brand. There are sturdy tie down points on each corner of the rail for those times when your rack itself isn't enough. I should note, however, that the new Ford Bronco is available with such tie-down points mounted to the hood. Nifty.  Back to the crossbars. Another potential advantage is that they sit lower to the roof than most crossbars (although something like the Thule AeroBlade Edge comes close). Don't quote me here, but less of a gap between the roof and whatever is above seems likely to be an aerodynamic advantage.

Subaru launches production of Ascent crossover in Indiana

Subaru began production Monday of the new Ascent, its much-anticipated three-row crossover, at its plant in Lafayette, Ind. It's set to arrive at dealers in June as a 2019 model and will start at $32,970, including shipping. The Ascent joins the Impreza, Legacy and Outback as vehicles built at the plant. It'll compete with three-row utility vehicles like the Honda Pilot, Toyota Highlander, Chevrolet Traverse and Volkswagen Atlas. (Read our comparison of the Ascent to the former two here.) Subaru built around 364,000 vehicles at the Indiana plant last year and expects the Ascent to nudge that up to around 400,000 vehicles a year. The automaker spent $140 million and added 1,200 jobs at Lafayette to support the Ascent. The company in late 2016 shifted production of the Impreza sedan and hatchback to the factory, its lone manufacturing site outside of Japan, to free up room at its plant in Gunma Prefecture for the hot-selling Crosstrek, which has been singlehandedly lifting Subaru's U.S. sales lately. A Subaru spokesman told Autoblog recently that the company hopes to sell 60,000 Ascents in the first year and had already booked more than 4,000 sold orders on the vehicle from customers who hadn't seen or driven it. The Ascent will come in either seven- or eight-seat configurations, is offered in all-wheel-drive and is based on a modified version of the same Subaru Global Platform that underpins the Impreza. It's powered by an all-new 2.4-liter turbocharged boxer four-cylinder that makes 260 horsepower and 277 pound-feet of torque. It fills a slot formerly occupied by the Tribeca, Subaru's last three-row vehicle, which was discontinued in 2014. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.