2011 Subaru Legacy 2.5i on 2040-cars

Auto blog

2018 Subaru BRZ Quick Spin Review | Curves required

I had a 2018 Subaru BRZ Limited with a six-speed manual and half a day to play on wet, windy roads hemmed by pine trees in the foothills of a massive mountain range. But Michigan was on my mind. Some cars work everywhere. Michigan's the perfect place to find those that do: The roads are flat and pockmarked, and the seasonal extremes are brutal. It's easy to love a car on one of those bucket-list Alpine passes, but on Michigan roads the car has to work hard to win you over. For example, the MX-5 Miata works in Michigan just fine. It's fun in all conditions in which you can get the rear tires to hook up, and some that you can't. It cheerfully entertains in traffic, on city streets, undulating but uninteresting country roads. Some grand tourers work perfectly well there, too, soaking up enough punishment from the atrocious roadways without battering the occupants. The more voluptuous Aston Martins are particularly good at this trick, and they're plenty entertaining to cruise around in — or mash it flat after a scan of a country intersection shows nothing doing for at least 50 miles in every direction. These cars have more than just compliance — they have a subjective, elusive charm in suboptimal conditions. And the 86 twins, well, aren't Miatas. The car isn't lacking in dynamic ability, of course, but there's a flatness, a one-dimensionality to it. It's simply suffocated, starving for a little bit more. It doesn't have to be this way. Put the 86 in a better situation and its foibles recede but don't disappear. Straight, pock-marked slabs are the death of the thing. So I grabbed one out West, in Washington state where I now live, and fed it revs and curves until I was satisfied that the BRZ works as intended when you keep it happy. And when it's happy, you're happy. The BRZ was on high-performance summer tires, and some of the best roads in Washington are up in the hills currently blanketed by slush and ice, so that was a nonstarter. But there's a windy, weedy little farm road bending through a river valley just 20 minutes from my house. It's got lots of sudden, blind bends — not to mention working farms — so it's not the place to exercise a Corvette Z06. But there are enough turns you can see all the way through to make it fun, and three unbelievable uphill hairpins right at the end. We're talking 15 mph posted speed limit turns, and those signs aren't far off.

Subaru WRX STI Type RA NBR Special is nearly as fast as a Porsche 918 Spyder at the Nurburgring

Subaru now claims to have the fastest sedan to circle the Nurburgring. Its (deep breath) WRX STI Type RA NBR Special finished a lap of the famed German racetrack in an incredibly fast 6:57.5. That's just half a second behind the Porsche 918 Spyder hypercar. Of course, this WRX STI is a specially-built racecar, a rather distant cousin of the WRX STI Type RA production car that takes its name from this race car. The Type RA NBR Special is an upgraded version of the car Subaru took to the Isle of Man time trial last year, where it broke Subaru's old record. The car was built by Prodrive, and it features a 2.0-liter turbocharged flat-four made for rally use. It now makes over 600 horsepower at 8,500 rpm, which is 50 more than it made last year. The aerodynamic aids have been updated, and they provide 650 pounds of downforce at the car's top speed. The car still has the power-adjustable rear wing from last year. At the press of a button, the driver can change the angle of the rear wing to reduce drag and increase speed on straights. Supporting the power and aerodynamic upgrades are 9-inch wide slick tires at each corner, and a rally-spec sequential transmission that can shift gears in 20 to 25 milliseconds. Related Video:

Custom cabinetry gives this Subaru Outback camper cred

Where there's space, there's wood to make it more functional. At least, that seems to be the ethos at customization shop Solid Wood Worx. The Huntington Beach, Calif.-based company has turned vehicles such as the Ram ProMaster, Nissan XTerra, Toyota 4Runner, and Ford F-250 into small, livable mobile homes. The most recent project is a Subaru Outback, which uses a unique series of cabinets to meet a fairly complex checklist of asks.  Noticed by Motor1, the Outback belongs to an adventurer named Sean who is setting out on a six-month climbing trip. She reached out to Brian, a woodworker and former cabinet builder, at Solid Wood Worx with her vision of the Outback as a sleep-in camper. She wanted a flat place where she and her 80-pound dog could sleep, a slide-out kitchen with stove and fridge, storage for climbing gear, storage for clothes, and a designated space for a water supply. Possibly the biggest ask was an integrated solar panel with a battery and inverter for off-the-grid living. Brian made it all work.  With the solar panel and spare tire hitched to the Thule roof rack and out of the way, Brian built an interior platform that stretched from the rear hatch to the back of the front seats. Since this eliminated any use of the rear seats, they were taken out. The platform itself has built-in drawers, and the upper portion is split into two functional spaces. The right side has just enough room to fit a small mattress, but Sean looks small, so it should work perfectly. Beneath the bed is the sliding drawer that stows the camp stove. On the left side is a massive amount of storage that doubles as secondary kitchen prep space. On top of that is a small fridge that opens on top like a cooler.  With the kitchen area in its "out" position, a secondary panel opens up to the space where the spare tire used to be. Inside that, Brian's team fitted the wiring, fuses and equipment for the solar panel's battery storage. For this project, Brian used a 100 amp-hour battery and a 100-watt solar kit from Renogy. That power feeds an inverter, a few USB plugs, and the small fridge. Looking through the rear passenger door, there are even more storage spaces for things such as clothes, bedding, shoes, and a laptop. The water tank slides in behind the front seat.  In most of his builds, Brian uses three-quarter-inch nine-ply pine plywood that he gets from Home Depot. It costs roughly $35 for a 4x8 sheet, and each piece weighs about 60 pounds.