2020 Subaru Forester Limited on 2040-cars

Auto blog

Subaru Outback Luggage Test | How much cargo space?

I'm reporting to you from my home in Portland, Ore., which is pretty much ground zero for Subaru Outback ownership. They're absolutely everywhere, challenged only by its little Crosstrek brother for new-car ubiquity. A big reason for that is owners (of which I know many) actually take them on outdoorsy weekend adventures. Ground clearance, all-wheel drive, copious space for gear and actually useful roof racks make an actual difference — it's not just for show, as is often the case with crossover ownership.   Well, the ground clearance (8.7 inches) and all-wheel drive (standard) are a given, but just how much space are we talking about in the Outback? The specs say there's 32.5 cubic feet behind the raised back seat, which is comparable to most compact crossovers. The rare ones that run bigger include the Honda CR-V (39.2 cu-ft) and Subaru's own Forester (35.4 without the panoramic sunroof), but remember that much of their volume is up high in the greenhouse since they are taller vehicles. By contrast, the Outback is deeper, which can not only be seen with the back seat raised, but when lowered, it's a few inches longer. If this test involved a trip to Ikea, I'm pretty confident the Outback would do better than those compact SUVs as a result. But, this is about luggage, not boxes of Bjorgorfen parts, so let's pack up the Outback for a hypothetical Pacific Northwest outdoorsy weekend adventure. So here is what you're working with. Note that rubber trunk tray and cargo cover are actually standard on all but the base Outback trim level.  As for that cargo cover ... Upper left: Here it is in place. Duh. Upper right: Like many other vehicles, especially wagons, there's a channel that runs up the D pillar that lets you quickly raise the cover without fully retracting it.  Bottom left: Here's a better look at that channel. Bottom right: Because the back seat reclines, you could end up with a gap between seatback and cover. This little filler piece is attached to a tension rod that easily adjusts by hand.  OK, onto the bags. As usual, I'll start by keeping the cargo cover in place. And as always, I use two midsize roller suitcases that would need to be checked in at the airport (26 inches long, 16 wide, 11 deep), two roll-aboard suitcases that just barely fit in the overhead (24L x 15W x 10D), and one smaller roll-aboard that fits easily (23L x 15W x 10D). I also include my wife's fancy overnight bag just to spruce things up a bit (21L x 12W x 12D).

Subaru Crosstrek gets an injection of Baja racer DNA from Crawford Performance

Subaru's idea of updating the Crosstrek is dropping a bigger, 2.5-liter flat-four engine in the engine bay. American tuner Crawford Performance has other plans for the city-friendly crossover. It turned the model into an off-roader enhanced with a lift kit, skid plates, and extra lights reminiscent of Subaru's rallying past, among other add-ons. California-based Crawford Performance knows what it takes to improve a Subaru. It's one of the companies responsible for the Crosstrek Baja Racer introduced in 2019, and it's the only aftermarket parts manufacturer ever factory-backed by Subaru. The suspension lift it developed for the second-generation Crosstrek adds 2 inches of ground clearance to the front axle and an extra inch and a half to the rear. For context, the Crosstrek sits 8.7 inches off the ground when it rolls off the assembly line, so the lift alone raises it above the 10-inch mark. Subaru didn't develop the Crosstrek for hardcore off-roading, so Crawford added tubular bumper overriders on both ends and over both rocker panels, aluminum skid plates that protect vital mechanical components from oily (and expensive) encounters with boulders, and additional lights mounted in front of the door mirrors. Spot lights and 15-inch alloy wheels wrapped by beefy tires ensure you can see what's ahead and effortlessly drive over it. Crawford kept the stock, naturally-aspirated 2.0-liter flat-four engine but Top Gear learned it installed an air-oil separator and intake spacers to increase its output from 152 to 167 horsepower. That's not a huge bump, but it should be enough to make the Crosstrek a little peppier. The four-cylinder still spins the four wheels through a continuously variable transmission (CVT), and it exhales through an upgraded exhaust for a rally car-like sound. Adventurers who want to build a lifted Crosstrek need to set aside $550 for the kit, which includes aluminum strut spacers, strut extensions, and other bits and pieces like sway bar link extensions. Other parts like the skid plates, the air-oil separator, and the tubular add-ons are sold separately. And, of course, you'll need a good set of tires. If you're not a DIYer, Top Gear reported Crawford plans to sell a fully-assembled model positioned between the production Crosstrek and a purpose-built race car. It will cost approximately $35,000 when it goes on sale.  Related Video:    

New Subaru concept crossover EV shown in walkaround video

Subaru held a technology briefing this week in Tokyo where it announced ambitious sustainability goals, but nearly lost amid the discussion of converting its fleet over to electricity was the unveiling of what appears to be an early concept version of a forthcoming battery-electric crossover. Thanks to the Japanese YouTube account LoveCars!TV!, we get a walkaround look. It appears to be Subaru’s version of the crossover EV it is jointly developing with Toyota, to be built atop a flexible platform that can accommodate multiple production vehicles from both brands. What weÂ’re shown is an athletic-looking crossover with its wheels pushed to the corners that borrows design elements, for better or for worse, from Cadillac, the Pontiac Aztek and the Tesla Cybertruck. Up front, the crossover borrows and exaggerates CadillacÂ’s signature squared-off corners and deep fog-light scoops that also reminds us of InfinitiÂ’s Q Inspiration concept from the 2018 Detroit auto show. It opts for narrow LED headlamps, and it notably omits any aesthetic concession to even a faux grille, save for a hexagonal shape outlined by the panel seams. Coupled with the black cladding on the lower bumper, the crossover's face has a certain Batman-logo shape to it. Moving around to the side, we see heavy black cladding — it doesn't appear to be standard plastic, since it reflects light — around the wheel wells, lending them a semi-octagonal shape that evokes the strongest comparison to the polarizing Cybertruck. Coupled with some interesting side creases, the cladding also gives the appearance that the wheel wells bulge out, and that the doors pinch inward, more than they probably do in reality. There are also no door handles or brakes, the side mirrors are rearview cameras and the windows are blacked out, so thereÂ’s nothing to divine about the interior and how far along that is in conceptualization. In back is where things get especially weird and Aztek-like, with a blunt and upright rectangular body panel making up the tailgate underneath a generously long, sloping rear window. ItÂ’s beveled at the top to tuck underneath the rear LED light bar, which stretches the length of the glass, and curved on each end to integrate with the sides. The LED treatment also dives down 90 degrees from the horizontal rear bar and then makes another sharp 90-degree jag to bracket the rear panel in hard-angled brake lights.