1984 Subaru Brat on 2040-cars

Auto blog

Don't expect an all-new Subaru WRX until 2020

Despite Subaru completely overhauling the Impreza for 2017, it appears the WRX will stick around on its current platform for another few years. That's the word from Motoring in Australia, who spoke with an senior engineer from Subaru about a WRX replacement. For those that can't wait, the good news is that a WRX refresh is coming for 2018, which should carry the car for another few years. It should be no surprise that a full WRX redesign is a few years off. Although the fourth generation Impreza was released in 2011, the current WRX has only been on sale since the 2015 model year. Given an average five-year cycle, we can most likely expect a redesign for 2020. It's not clear how extensive the refresh will be or if the STI will finally drop the ancient EJ-series 2.5-liter turbocharged flat four engine for the more modern FA-series 2.0-liter turbocharged flat four engine found in the regular WRX. Rumors have been swirling for years of what else a full-redesign may encompass. The current model was rumored to have an electric turbocharger that obviously never appeared. There have been other rumors of a switch to a hybrid powertrain. While that may work when the WRX finally uses the updated Impreza platform, don't expect to see hybrid power in the refreshed model. Subaru says the time it would take to engineer such a system would be too great to have it available for 2018. The new Impreza's platform is designed to fit a hybrid system, so don't rule out the possibility of a WRX hybrid. Related Video: News Source: MotoringImage Credit: AOL Design/Style Subaru Hatchback Performance Sedan subaru sti

Subaru STI Performance Concept previews a bright BRZ future [w/video]

Subaru unveiled its STI Performance Concept car today at the New York Auto Show, a BRZ-based corner carver that says as much about the future of STI in America as it does about the future of the BRZ. And while this marks the world's first official look at the STI concept, Subaru gave me a preview of the car, and a long description of its significance, on a trip to Japan last month. The Performance Concept sends a tangible message about the motorsports heritage and engineering capability of Subaru Tecnica International. STI started life as the motorsports arm of Subaru parent Fuji Heavy Industries. Appropriately, the concept car uses a racing powerplant. Under the hood is the same turbocharged, 2.0-liter boxer-four that powers the BRZ GT300 from Japan's Super GT series, estimated at around 300 horsepower and 330 pound-feet of torque. But the STI concept is more like the ultimate road version of the BRZ instead of a recapitulation of an existing racecar. Chassis, suspension and braking components can all be found on the Japanese Domestic Market's road-going BRZ tS, for instance. Subaru invited me to drive the tS on that same trip, so stay tuned for a report on that experience later this week. It will pain Subaru fans to hear that this concept is not a defacto preview of a forthcoming turbocharged BRZ STI, at least not in the immediate future. STI has been charged with expanding its presence and reach in the North American market, but the process is going to roll out slowly without jumping straight to a fully realized production vehicle. Stage one of the STI expansion will be a consolidation of parts and aftermarket support in the US. Subaru has offered a pastiche of performance products through its dealerships up to today, including the US-only Subaru Performance Tuning (SPT) parts. In the near term, the company will phase out SPT in favor of STI parts and accessories, meaning you'll be able to purchase a lot of the stuff that the Japanese market has today. And we're talking about parts that actually impact performance, not just STI-badged shift-lever knobs or gas caps. The STI Performance Concept does show that Subaru sees a future for its rear-drive coupe in the American market, and that it wants to cater to enthusiasts. Stage two, which will happen in roughly the next year and a half, is to bring an STI-tuned version of the BRZ to the US, not unlike the JDM BRZ tS.

Subaru confirms it's found a new HQ location in Camden, NJ

Subaru is packing up shop and making a big move, announcing that it will be relocating its Cherry Hill, NJ headquarters. Is the company pulling a Toyota and moving across the country, or perhaps following the example set by Cadillac and relocating to a major metropolis? Nope. The all-wheel-drive aficionados are going just four miles down the road, to Camden, NJ. We suppose that is one way to celebrate all of the company's sales successes. The move hasn't been confirmed through the New Jersey government just yet – it needs to be approved by the New Jersey Economic Development Authority – but if it gets the green light, it will see the company relocate to a new, 250,000-square-foot facility that's twice the size of its current headquarters. The land the company will be developing on is currently owned by Campbell Soup Company. Provided the NJEDA approves the plan, Subaru will work things out with its developers, and is hoping to be up and running at the new facility by 2016 or early 2017. Take a look below for the company's announcement. December 5, 2014 SUBARU OF AMERICA CONFIRMS APPLICATION FOR NEW HQ LOCATION IN CAMDEN, N.J. Cherry Hill, N.J. - Subaru of America, Inc. has confirmed that it has identified the preferred location of its new corporate headquarters as an all-new development in Camden, N.J. The new site is approximately four miles from the company's current location in Cherry Hill, N.J. The confirmation comes as Subaru celebrates six successive annual sales records and the new building is planned to bring on to one campus various functions of the company including Sales, Marketing, Service and Administration that are presently housed across three separate sites in southern New Jersey. The new site is adjacent to the Campbell Gateway District and is currently owned by Campbell Soup Company. Subaru of America will house more than 500 employees and contractors in the new facility that at 250,000 square feet will be double the size of the current HQ building. Subaru of America's application is now subject to New Jersey Economic Development Authority (EDA) approval, followed by negotiations with the developer Brandywine Realty Trust and then a concluding internal cost approval process. Final decision is expected by April 2015 and subject to this approval, Subaru plans to complete the project by fourth quarter, 2016 or early 2017.