2004 Subaru Baja Sport Crew Cab Pickup 4-door 2.5l on 2040-cars

Auto blog

New-gen 2020 Subaru Outback carries on its rugged legacy

The Outback is Subaru's best-selling vehicle, and for good reason. It's capable, it's versatile, it wears inoffensive looks, and it offers plenty of modern tech in a relatively affordable package. So when it came time to rework the model and introduce a new generation, Subaru took the less-is-more approach to the aesthetic redesign, which only has subtle tweaks. The major changes come inside the cabin and beneath the sheetmetal by introducing a more premium interior, and an all-new XT trim with a torquey new 2.4-liter turbocharged boxer engine. Similar to the approach used to update the 2020 Legacy, Subaru refined the Outback at every level. That started with the car's bones and the Subaru Global Platform. Subaru says the 2020 Outback is 70 percent stiffer in torsional and front-suspension rigidity and 100 percent stiffer in front lateral flex and rear subframe rigidity. The improved structure is also said to be 40 percent more absorbent in front and side crashes. More exciting is the introduction of multiple XT trims, which come standard with a 2.4-liter turbocharged boxer engine. Like the Legacy, the Outback is getting rid of the 3.6-liter six-cylinder engine in favor of the model's first turbocharged offering since 2009. It makes 260 horsepower at 5,600 rpm and 277 lb-ft of torque at 2,000 rpm, four more horsepower and 30 more lb-ft than the six-cylinder. Subaru notes the 2.4-liter engine offers a 3,500-pound towing capacity, which is an 800-pound improvement and the Outback's highest tow rating ever. It is estimated to get 23 mpg city and 30 mpg highway, compared to the 3.6's 20 mpg city and 27 mpg highway. All Outbacks come standard with permanent symmetrical all-wheel drive and a Lineartronic continuously variable transmission (CVT) that offer an "eight-speed" manual mode and paddle shifters. Base-model Outbacks continue to use a 2.5-liter naturally aspirated boxer engine, which Subaru says has 90 percent new parts. Its specs increase to 182 horsepower at 5,800 rpm and 176 lb-ft of torque at 4,400 rpm from 175 horsepower and 174 lb-ft in the previous model. With the slight increases in power comes a lighter and more agile suspension. Up front the Outback will have MacPherson struts with an internal rebound spring and a new 0.9-inch hollow stabilizer bar. In the back, a double wishbone setup with coil springs and a 0.75-inch hollow stabilizer bar. Overall, the Outback maintains its impressive 8.7 inches of ground clearance.

Subaru confirms 3-row crossover for Indiana plant for 2018

There's a new vehicle coming to Subaru's Lafayette, IN, factory, as the all-wheel-drive specialist confirmed the site will build a new three-row crossover. The vehicle, which will actually be larger than the long-departed, three-row Tribeca, will begin construction in 2018. This announcement from Subaru follows a report from Automotive News last week that the company would introduce a US-specific seven-passenger CUV. That same report pointed to the Indiana factory as the source of the new model. It's unclear if this new model will revive the Tribeca name. All the company would say is that it "will likely carry a name synonymous with outdoor adventure, consistent with the company's other successful crossovers." "We are delighted to be bringing even more Subaru manufacturing to the US," Subaru of Indiana Automotive executive vice president Tom Easterday said in a statement. "The new model will also result in increased investment at SIA and at several of our suppliers across the country." Alongside the unnamed new CUV, Subaru's Lafayette, IN, factory already builds the Legacy and Outback. By the time the full-sizer arrives, the factory will also be responsible for the redesigned Impreza. Read on for the official announcement from Subaru. November 9, 2015 SUBARU CONFIRMS NEW 3-ROW CROSSOVER TO BE MADE IN U.S. AT INDIANA PRODUCTION PLANT Subaru of Indiana Automotive will receive 3-row in 2018 as its fourth model Cherry Hill, N.J. - Subaru has confirmed that a new 3-row crossover model, effectively replacing the retired Tribeca, will be produced at its SIA plant in Lafayette, Indiana. The all-new crossover is expected to be built beginning in 2018 and will be a larger vehicle than the Tribeca, with full third-row capability. The new vehicle has not yet been named, but will likely carry a name synonymous with outdoor adventure, consistent with the company's other successful crossovers; Outback, Forester and Crosstrek. When production of the new model begins, Subaru will have four models produced in the U.S.: Legacy, Outback, a new Impreza compact sedan and 5-door model beginning production in late 2016, and this new crossover. Subaru production in Indiana is projected to be approximately 228,000 units in 2015, and annual capacity is scheduled to grow to 394,000 with the introduction of the Impreza model. Subaru is currently enjoying its seventh consecutive year of sales records and expects to close 2015 with over 550,000 sales, with sales tripling since 2007.

2017 Subaru Impreza sedan spied for the first time

Subaru gave us a look at the attractive concept for the next-gen Impreza hatchback at the recent Tokyo Motor Show, but new spy shots present the opportunity to check out the production version as a four-door sedan. While camouflage makes the details harder to suss out, there are a few notable similarities. At the front, the concept's thicker grille and more angular headlights both appear present through the cladding. The shape of the A-pillar also looks alike. However, the visually interesting creases along the sides either aren't coming to production or are just very well hidden on this example. At the back, the taillight coverings suggest the C-shaped units from Tokyo might see production. In addition to the angular styling, the next-gen Impreza should see a mechanical overhaul by moving to Subaru's new modular platform featuring the company's more fuel efficient, direct-injected engine. Don't expect the brand's famous all-wheel drive to go anywhere. With production slated to move to the company's factory in Lafayette, Indiana, the latest Impreza should launch in the latter part of 2016 as a 2017 model. Hopefully we will get a better look at both the sedan and hatchback before then. Related Video: