1977 Rolls-royce Corniche on 2040-cars

Auto blog

Rolls-Royce Cullinan revealed: Ultra-luxury SUV is so British, it curtsies

Why did we ever expect the Rolls-Royce Cullinan to look like anything other than a Phantom on a lift kit, minus the trunk? The Rolls-Royce of SUVs perfectly employs Phantom cues, from the raised hood to the strong shoulder line and coach doors. The English off-roader brings a bunch of brand-redefining firsts with it, including all-wheel drive, an off-road driving mode, and a suspension that actively extends the dampers to keep every wheel on the ground. All of the vehicle's innovations serve the tagline that will help sell the Cullinan to wealthy owners: "Effortless, Everywhere." View 30 Photos The Cullinan stretches 210 inches long on a 130-inch wheelbase, 17.2 inches shorter overall than a Phantom on a wheelbase 9.8 inches shorter. However, the SUV is 5.6 inches wider than the sedan and its roof stands 7.2 inches higher. Built around the same all-aluminum Architecture of Luxury as the Phantom, the extra bits that make the Cullinan ready for dirty work add just 200 pounds compared to the car, for a curb weight of 5,864 pounds. The 6.6-liter twin-turbo V12 (Rolls-Royce still refers to it as a 6.75-liter) produces 563 horsepower and 627 pound-feet of torque, matching the Phantom's horsepower but losing 37 lb-ft of torque. However, the remaining torque comes 100 rpm sooner in the Cullinan than in the Phantom. Rolls-Royce whipped up another narrative trick to keep the Cullinan from being associated with the two-box SUV herd, calling it "the first 'three-box' offer in the SUV sector." With only two boxes visible from outside, we assume Rolls-Royce refers to the available glass partition in the cabin separating the seating area from the cargo, for Cullinans equipped with individual second-row seats. That would make for three distinct areas, and serve as a "nod to the era when luggage was mounted on the exterior of the motor-car, so the occupants did not travel with their belongings." Speaking of which, the feature we normally call a "tailgate" is called "the Clasp" on the Cullinan, a reference to when drivers put luggage on the outside of the car. The electrically operated two-piece hatch has a narrow lower section that folds down to help support the electronic drawer in the Recreation Module. The module provides custom designed storage for tools suitable to an owner's hobbies, like hawking, hunting, or drone racing, or it can stow the seats and cocktail table for the Rolls-Royce Viewing Suite. The Cullinan earns its chops in the cabin and under the skin.

2021 Rolls-Royce Ghost has a fascinating new part to make it one of the most comfortable cars in the world

One of the neat things about Rolls-Royce is the extraordinary lengths the company will go to for maximum comfort. It's like how supercar builders will look for every little advantage to make their cars a tenth of a second faster. On the 2021 Rolls-Royce Ghost, the company is employing something called the Planar Suspension System, a nebulous designation for the collection of systems and parts employed. Some are straight forward, such as the four-wheel independent air suspension, and the way the GPS and forward cameras inform what level of firmness should be employed on the road. But one part left us perplexed: the upper control arm damper. We spoke to Jon Simms, lead engineer for the Ghost, for more information, and now we have a better grasp on what it is and what it does. As for what it is, it's the roughly horseshoe-shaped object highlighted in purple in the above photo. The yellow parts are bumpstops, and it's mounted on the same joint as the upper control arm. And it turns out it's a pretty simple piece of equipment. It works very much like the harmonic balancer on the end of an engine. It's a weight with a rubber-y flexible hinge, and going over smaller bumps, it absorbs some of the extra vibration and movement from the suspension. Those bumpstops in yellow give the damper some extra purchase on the control arm, and they absorb impacts from larger bumps that may move the control arm suddenly so that the arm and damper don't bang into each other. This may seem like a pretty minor thing, but remember, Rolls-Royce and its buyers are out for maximum comfort, so there's reason to invest in ironing out every possible ride quality issue, no matter the size. And even if it's a minor improvement, that's not necessarily a bad thing. Simms told us that existing Ghost customers they talked to during development had one key request about the driving experience: "don't break it." So making sure that the new car was basically like the last one, but a bit better, would seem to be what customers would want. 2021 Rolls-Royce Ghost View 29 Photos The Ghost is the first Rolls-Royce to adopt this full suite of Planar Suspension System parts, though other Rolls-Royce models have had pieces of the system. And considering the fact the Ghost shares its platform with the Phantom and Cullinan, now, we wouldn't be surprised if later versions of those models pick-up parts like this damper. Related Video:

Check out Rolls-Royce's totally awesome AWD mule

No, this isn't just a super badass Phantom. The car you see here – codenamed Project Cullinan – is an early development mule for the new all-wheel-drive suspension system that will eventually be found in Rolls-Royce's upcoming SUV. It's made up of a shortened Phantom body, looks totally murdered out, and has a huge freaking wing on the back. We love it. Of course, Rolls-Royce properly poo-poos any similarities between this mule and the eventual production model. "The body may hint at the size of the new car, but it features no design aspects of the eventual high-sided, all-terrain motor car announced by Rolls-Royce Motor Cars in February this year," the company said in a press release. The end goal of this mule is to create "a final all-wheel-drive system that delivers Rolls-Royce's hallmark 'magic-carpet' ride not only on the road, but off-road too." Screw the SUV. We'll take one as-is. PROJECT CULLINAN BEGINS DEVELOPMENT PROGRAMME AS ENGINEERING MULE APPEARS IN PUBLIC In its open letter on 18 February this year, Rolls-Royce Motor Cars gave an undertaking to inform stakeholders of the progress of Project Cullinan. Keeping this promise, Rolls-Royce Motor Cars has today published photographs depicting the first key milestone in the vehicle's development programme. The photographs are of the first engineering mule, which will be seen on public roads this week. This early engineering mule, based on a shortened Phantom Series II body, has been created purely to begin the development of an all-wheel drive suspension system that will deliver a ride that will be Effortless ... Everywhere. The body may hint at the size of the new car, but it features no design aspects of the eventual high-sided, all-terrain motor car announced by Rolls-Royce Motor Cars in February this year. The mule rides on the first iteration of an all-new suspension that will assist Rolls-Royce engineers in developing a final all-wheel drive system that delivers Rolls-Royce's hallmark "magic-carpet" ride not only on the road, but off-road too. The first series of tests will focus on Project Cullinan's on-road behaviour from suspension throw to high-bodied stability, and will test the new suspension across all types of international road surface specification at test facilities, as well as on public roads. Test surfaces will include; Belgian Pave, cobblestones, corrugated concrete, noise development and measurement surfaces, resonance road, and acceleration bumps.