2024 Ram Ram Promaster Ram Promaster 1500 Tradesman Cargo Van High Roof 1 on 2040-cars

Auto blog

Towing with the 2016 Ram lineup [w/video]

I do not tow things. Ever. Yet I recently found myself at the Fiat Chrysler Automobiles proving grounds in Chelsea, MI, where I'd be testing the hauling capabilities of Ram's current product range. This experience was not only a perfect education for a towing novice like me, but allowed me to tow far more weight than I'd ever consider hauling the real world, and all within the safe confines of the Chelsea Proving Grounds. There was an extremely diverse array of vehicles at my disposal, including Ram's gasoline- and diesel-powered offerings with trucks ranging from the 1500 on up through the 5500 Chassis Cab, as well ProMaster vans. Beyond that, FCA brought out a number of vintage Dodge pickups for me to play with, while also working with Case IH to provide a track-loader I could test. I put together a range of videos covering everything from the classics to the production trucks to the construction equipment. And despite some technical difficulties – you'll notice a distinct lack of in-car videos, with blame going to a corrupted micro SD card – I've assembled ten videos that give an up-close look at Ram's offerings. 2015 Ram ProMaster City Let's start small. The ProMaster City only has a towing capacity of 2,000 pounds. That's a reasonably impressive figure for a van that uses the same powertrain as a Chrysler 200. The 2.4-liter four-cylinder and nine-speed automatic weren't really bothered with the extra weight added by the trailer. Even when accelerating at freeway speeds, the ProMaster City didn't feel out of breath or hampered by its load. That said, the rear of the van was unloaded, which probably wouldn't be the case for most consumers. It's unclear how the City would feel if its driver were taking advantage of the max payload (1,883 pounds) and towing. 2015 Ram ProMaster 1500 To be polite, the Ram ProMaster is a difficult vehicle to like. Its awkward seating position is bus-like and lacks the visibility enjoyed by the Ford Transit or the utter driving comfort of the Mercedes-Benz Sprinter. Its 3.0-liter, four-cylinder turbodiesel engine, meanwhile, is something of an anomaly. While it's potent for a four-cylinder diesel, producing 295 pound-feet of torque and 174 horsepower, those numbers don't feel all that impressive when loaded down. The model I tested was barely using half of its 5,100-pound maximum towing weight and was loaded down with just 500 of its 3,620-pound payload. Yet it lacked the pluckiness of the smaller City.

Current Ram 1500 sticking around into 2019

Ram is preparing a big redesign of its 1500 pickup truck for 2018, but for fans of the current truck, don't feel like you need to rush out to grab one – it's sticking around until 2019. That's according to Automotive News, whose sources spoke on condition of anonymity. The move allows Ram to take a two-prong approach to truck sales, offering the current model as a low-cost option for fleet users while pushing retail consumers toward the new pickup. The factories that build the 1500 today – Warren, MI, and Saltillo, Mexico – will assemble around 200,000 trucks in 2018 and 65,000 in 2019 before Ram phases out the older model. Meanwhile, FCA's Sterling Heights, MI, plant will screw together 325,000 redesigned 1500s starting in 2018, with production to increase to over 400,000 units in 2019. While Ram refused to comment when AN reached out, FCA CFO Richard Palmer hinted at the move during a conference call last week, saying "having more pickup capacity will allow us also to satisfy the fleet customers' demand on pickup, which we struggle to do today because we favor retail in the U.S. and Canadian volume, which have higher margins." "As we realign our capacity, we're going to be able to continue to work on improving our fleet mix," Palmer said. Beyond making a play for fleet buyers, continuing to build the current 1500 guarantees dealerships maintain a solid inventory as Ram ramps up production of the new truck. You can check out leaked images of the redesigned Ram here. According to Automotive News, the new truck won't use aluminum, like the Ford F-150, relying on steel instead. FCA's 3.6-liter V6 will provide thrust along with turbocharged options, although there's no mention of the venerable 5.7-liter Hemi V8. Don't read too much into that, of course – we'll eat our shoe if the 1500 ditches the popular eight-cylinder. It's still too early to predict when the 2019 Ram 1500 will debut, but it will likely happen in 2018 at the North American International Auto Show in Detroit or perhaps at a non-auto show event. Related Video:

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.