2021 Ram Promaster 2500 High Roof 159" Wb on 2040-cars

Auto blog

2019 Ram 1500 spotted with split tailgate

A little over three years ago, we discovered a patent from Fiat-Chrysler that showed a pickup truck tailgate that not only dropped down like a normal one, but was also split into two swing-out halves. It appears to be a reality now, since one of the Ram 1500 prototypes shown above has just such a tailgate. The tailgate above does look a bit different from the one shown in the patent drawings. For one thing, it's not a 50/50 split in the middle. Instead, Ram seems to have opted for something like a 60/40, or maybe 70/30 split. We're not sure exactly why this is, but there could be a few advantages. For one, It probably allows for the use of the same or nearly the same handle as on conventional Rams, as well as the same badging. For another, if the tailgate operates as described in the patent, it might be possible to open just one side without opening the other, and having the shorter piece could offer some flexibility in tight areas where a larger half couldn't open fully. Testing alongside the split tailgate truck were some other Ram 1500s that had their tailgates completely covered. They did reveal some other cargo management features that should show up on the production truck, such as a return of the RamBox bedside storage compartments. One of the trucks also revealed some ribbed bedsides that would allow the positioning of a cargo divider just about anywhere in the bed. We expect to see the new Ram 1500 to be fully revealed at the Detroit Auto Show in January. In the meantime, you can check out what we believe the production truck will look like, as well as everything we know about it, here. Related Video:

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Ram confirms Fiat Ducato vans to form new Promaster series for US

Chrysler has officially confirmed that Ram will develop an all-new large van for the US market based on the Fiat Ducato. The commercial rig will go on sale in the third quarter of next year, joining the Ram C/V on the company's professional van line. Expect to see the Promaster face off against the Ford Transit and revised Chevrolet Express.
Chrysler is pretty skimpy on details when it comes to the Promaster, but it has said the vehicle will make use of "familiar Ram Truck styling cues." The van will reportedly also bow with powertrains targeted specifically at the North American market.
Chrysler and Ram made the announcement ahead of the LA Auto Show alongside news that the company will launch a new Ram commercial truck division.