2020 Ram Promaster 3500 High Roof 159" Wb Ext on 2040-cars

Auto blog

Winnebago Trend, Travato are first ProMaster-based RVs

While Ford has been the dominant supplier of chassis, engines and platforms for the recreational vehicle industry in modern times, its market share has been eroded by the increased availability of new commercial vehicles on the market. In the days of Daimler-Chrysler, the Sprinter was Chrysler's alternative to the Ford E-Series as a basis for Class B and C motor homes. But then Daimler split and the Sprinter went back to being a Mercedes product in the US, though it still continued currying favor in the RV world by offering diesel power with a smaller footprint. With the marriage of Chrysler and Fiat, though, the Pentastar brand once again has a foreign-sourced commercial van alternative - the Ram ProMaster - and Winnebago is the first RV manufacture to make it into a motor home.
Actually, Winnebago has unveiled a pair of ProMaster-based RVs: the Trend and Travato. The Trend is a Class C motor home, which generally means it's based on the chassis cab version of a van and features a bed over the cab and larger body for living space behind the B-pillars. Available in a tidy 24-foot length, the Trend can be had with two floor plans, both of which include large sleeping areas, a bathroom, kitchen and a dinette. The Trend also has some unique touches, including seats in the cab that swivel around to face the rear and three-point seat belts for the dinette.
The second ProMaster-based Winnie is the Travato, a Class B motor home, which is basically the full van model with as many amenities for living crammed into its quarters as will fit. The Travato measures in at just under 21 feet in length, but packs the full RV experience into the ProMaster's tall body, including a double bed, full bath, kitchen and dinette. The rear bed can even flip up and out of the way, allowing stowage of larger things likes bikes through the van's rear double doors.

Chrysler recalling 31k SUVs and vans

Chrysler is issuing recalls covering roughly 31,700 vehicles worldwide due to two separate problems. In both cases the company believes that most of the affected vehicles are either still on, or in transit to, dealer lots.
One recall covers roughly 10,700 Dodge Durango, Jeep Cherokee, Grand Cherokee and Grand Cherokee SRT models from the 2014 model year built between January 16 and April 17, 2014. The SUVs need a software update for the cruise control. It's possible that when the cruise is on and the driver presses on the throttle, the acceleration could last a second after the pedal is released or two seconds for the SRT. Afterward, they return to the speed originally set by the driver.
Chrysler says it isn't aware of any accidents, injuries or even reported incidents of this happening in the real world. Also, in all cases, if the driver presses on the brake, the cruise shuts off. The automaker believes that there are about 6,100 affected SUVs in the US, 950 in Canada, 425 in Mexico and 3,200 outside of North America. The software upgrade will be ready shortly, the company says.

Ram recalling 65k trucks for rear-axle heat treating

A problem with the rear axle has promoted Fiat Chrysler Automobiles to recall a selection of Ram trucks. The campaign affects 2015-16 Ram 1500 series trucks – specifically those manufactured between June 17 and September 28, 2015. All told, that amounts to over 65,760 units across the United States. The issue stems, according to the statements below, from the rear axle shaft. Some of those trucks may have not had those axle shafts properly heat-treated, which could cause them to fracture and separate from the wheel. And that, it should go without saying, could lead to a crash. FCA states that most of the vehicles in question are in dealer hands, but while the manufacturer says it is aware of one accident to have resulted from the issue, no injuries have been reported. The owners of the affected vehicles will be notified to bring their trucks in to their local dealership to have them inspected. If necessary, the dealership with replace the rear axle assembly. This recall follows three prior (but unrelated) ones, also issued for Ram pickups, that between them affected well over a million units. Related Video: RECALL Subject : Incorrectly Heat Treated Rear Axle Shaft Report Receipt Date: OCT 15, 2015 NHTSA Campaign Number: 15V661000 Component(s): POWER TRAIN Potential Number of Units Affected: 65,760 Manufacturer: Chrysler (FCA US LLC) SUMMARY: Chrysler (FCA US LLC) is recalling certain model year 2015-2016 Ram 1500 trucks manufactured June 17, 2015, to September 28, 2015. The affected vehicles may have been built with rear axles that were incorrectly heat treated. CONSEQUENCE: If the rear axle shaft was not properly heated treated, it may fracture and a wheel separation could occur, increasing the risk of a crash. REMEDY: Chrysler will notify owners, and dealers will inspect the vehicles and replace the axle assemblies, as necessary, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R59. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. ### Statement: Heat-treating October 27, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 65,760 U.S.-market trucks – most of which are in dealer hands – to inspect and replace, as required, their rear axle shafts or rear axles.