2019 Ram Promaster 3500 136 Wb on 2040-cars

Auto blog

More Ram trucks recalled over tailgate issue

Almost a year ago Fiat Chrysler recalled roughly 1.6 million Ram trucks over an issue with the locking power tailgate. The actuator limiter tab for the power locking mechanism could fracture, which would permit the actuator's lock-rod control to move beyond its limits. That would pull the locking rods open, thereby allowing the tailgate to open at any time. The 2018 recall covered Ram 1500, 2500, and 3500 pickups from the 2015 to 2017 model years, with the five-foot-seven and six-foot-four beds and the power locking tailgate option. Trucks with eight-foot beds, and those with manual-locking tailgates, were excluded. The trucks with eight-foot beds have been added to the recall as of earlier this month, putting 410,351 more trucks in the pool. According to Consumer Reports, Ram redesigned the locking assembly on the other two shorter bed sizes for trucks built after August 2, 2017, which was the end of the 2017 model year. But the eight-foot long-bed trucks didn't get the redesigned part until April 2, 2018 for some reason, making all eight-foot-bed pickups from the 2015 model year to April 1, 2018 part of the recall equation. FCA says it's not aware of any accidents or injuries because of the issue. The company plans to notify owners on June 28. The paperwork filed with the National Highway Traffic Safety Administration doesn't advise owners to stop driving the trucks, but nor does it instruct owners on how to address the problem in the meantime. Sounds like bungee cords might be the go. The fix is estimated to take 30 minutes at the dealer and entails removing the tailgate cover and installing a stop block to prevent the locking actuator's pivot arm from traveling too far. FCA says it will reimburse owners for any other repairs made to address the problem. Meanwhile, owners can contact Fiat Chrysler Automobiles customer service at 800-853-1403, and refer to FCA's number for this recall, V44. The NHTSA campaign number is 19V-347. Last year's recall comes under FCA number U74, and NHTSA campaign number 18V-486. Ram's not alone on this field. The NHTSA continues to investigate the 2017 Ford Super Duty pickups for a similar issue.

NHTSA investigating power modules on Chrysler Group SUVs and minivans

The Center for Auto Safety is officially petitioning the National Highway Traffic Safety Administration to begin scrutinizing alleged problems with the totally integrated power module (TIPM) on about 24 Chrysler Group SUVs and minivans. The advocacy group claims that the part's failure can cause affected vehicles to stall or not start at all. NHTSA is still looking into the accusations and deciding whether a full investigation is actually warranted.
The CAS petition claims at least 70 TIPM failures, but according to NHTSA, six of the complaints are for models that don't have the modules. In 34 of the reported cases, the vehicles refused to start, and in 17 of them the engine stalled. There were also two allegations of smoke and one of a fire. However, none of these affected airbag deployment or resulted in a crash.
This petition isn't the first TIPM-related problem for Chrysler Group. A recent report in the New York Times alleged that it found 240 complaints potentially related to the issue on NHTSA's website alone. In September, the automaker also recalled 230,760 examples worldwide (188,723 in the US) of the 2011 Jeep Grand Cherokee and Dodge Durango replace the fuel pump relay circuit inside of the TIPM-7 with one external to the unit. The original part could allegedly cause the models to stall without warning. Even earlier, the company also recalled about 80,000 examples of the Jeep Wrangler and Dodge Nitro in 2007 to have the module reprogrammed.

2021 Ram 1500 could finally get tech handed down from HD lineup

Based on details gleaned from spy shots of a 2021 Ram 1500 Laramie Sport Quad Cab 4x4 prototype, Mopar Insiders believes the 2021 Ram 1500 will adopt a few serious pickup convenience features, two of which have found homes on Ram heavy duty pickups for years. The first is towing mirrors with cameras as part of the pickup's 360-degree camera system. The Surround-View Cameras can be had as part of the Advanced Safety Group on the 1500 now, but they haven't been available with the trailer tow mirrors. On the heavy duty Rams, the Surround-View Cameras come as part of the Towing Technology Group. It's possible Ram will address the omission with next year's 1500 pickup. The same mirrors have been seen on the Ram 1500 Rebel TRX prototypes as well. The second hand-me-down from the heavy duty range is a bed-view camera mounted on an LED brake light at the back of the cab — Ram calls it the Center High-Mount Stop Lamp with Cargo View Camera. Some Ram owners making mods to their trucks, like installing a Tazer DT plug-in to access more vehicle settings, have discovered the camera line already installed as part of the harness. Next year could be when Ram decides to activate it. The last feature is trailer steering knob that serves a similar function to the Pro Trailer Backup Assist that can be optioned on the Ford F-150. The knob has been seen on leaked interior shots of the Rebel TRX, so it's assumed to spread to the rest of the 1500 trims. When backing up with a trailer, a driver turns the steering wheel in the opposite direction he wants to trailer to go. To make the job easier for occasional haulers, in a truck with trailer steering feature, the driver turns the dial in the direction he wants the trailer to go, and the software takes care of turning the truck to make the request happen. Since the fifth generation Ram 1500 only arrived for the 2019 model year, we don't expect substantive changes for 2021. Another big addition would be Uconnect 5, which debuts on the 2021 Pacifica but could slide to the Ram side of the family before the new model year. Related Video: