2018 Ram Promaster Tradesman Slt on 2040-cars

Auto blog

Ram 1500 TRX too tame for you? Hennessey cranks its Hemi V8 to 1,012 horsepower

Ram captured the top spot on the horsepower podium when it released the Hellcat-powered 1500 TRX in 2020. The truck's 702-horsepower output places it comfortably ahead of the Ford F-150 Raptor, at least for now, but American tuner Hennessey saw plenty of room for improvement. It added over 300 horses to the TRX's cavalry. Hennessey is a master in V8-ology, so it was only a matter of time before it injected more power into the TRX. It announced two models named Mammoth 900 and Mammoth 1000, respectively, and each number vaguely corresponds to the V8's new output. The 900's 6.2-liter produces 912 horsepower and 873 pound-feet of torque, increases of 210 and 223, respectively, compared to the standard TRX. Hennessey achieved these figures by upgrading the supercharger pulleys and making relatively basic changes to the intake and exhaust systems. Stepping up to the 1000 unlocks 1,012 horsepower and 969 pound-feet of torque, numbers that give the 6,300-plus-pound truck the uncanny ability to reach 60 mph from a stop in 3.2 seconds. It flies through the quarter mile in 11.4 seconds at 120 mph. Building a pickup with supercar-like acceleration required installing a bigger, 2.65-liter supercharger, adding high-flow fuel injectors, and recalibrating the ECU. Intake and exhaust modifications are on the menu, too. Surprisingly, it doesn't sound like Hennessey made significant internal changes to the engine or to the transmission, which suggests the standard components can handle a massive amount of power. Context is useful here. Released in 2013, the fifth and final generation of the Dodge-turned-SRT-turned-Dodge again Viper took 3.3 seconds to sprint from zero to 60 mph, and it logged an 11.5-second quarter-mile time. Previewed in a computer-generated sketch, the Mammoth 1000 (shown above) also receives 20-inch wheels wrapped by 35-inch off-road tires, a 2.5-inch suspension lift, custom bumpers on both ends, extra LEDs up front, electronic fold-out steps, plus an array of model-specific emblems. Inside, Hennessey added a numbered plaque. 200 units of the Mammoth 1000 will be available for the 2021 model year, and pricing starts at $135,350 including the cost of the donor truck (which carries a base price of $71,790) and a warranty valid for two years or 24,000 miles. Put another way, you get 30.6% more power than stock for about 40% more money.

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

Most American Cars | Honda Makes the Top 10 List

The car built with the most American/Canadian parts content is the 2021 Ford Mustang GT – with the manual transmission, specifically, no less – giving Ford a second consecutive year atop the American University Kogod Business School annual "Made in America Auto Index. We already knew that it doesn't get much more American than a V8 pony car, but now we've got the numbers to prove it.  Ford's iconic coupe takes the number one slot pretty convincingly this year, with 88.5% of its components coming from U.S. or Canadian sources. Appropriately, though perhaps confusingly, 21 models made the top 10 list in 2021. As you may have surmised, this is the result of multiple ties. Note also that many models appear more than once to account for variants built with parts from different sources. The top-ranked Mustang is a perfect example; The automatic drops into into a tie for 10th, right next to the EcoBoost model and Ram's 1500 Classic with the 3.6L V6.  The "America" theme runs pretty strongly through the top "10," with the Chevrolet Corvette sitting pretty in second place, followed by all three variants of Tesla's Model 3 electric car. Honda also makes several appearances thanks to its rather significant U.S. manufacturing footprint. Here are the 21 vehicles that make up the top 10 this year – don't worry, it feels just as weird to type as it does to read. Last year's winner, the midsize Ford Ranger pickup, cratered to 16th place, dropping from 70% American parts content to just 45%. Keep in mind, however, that the pandemic has forced automakers to source parts outside of their normal supply chains, and such drops should be taken with a grain of salt. Kogod noted that the overall proportions of content between manufacturers remained relatively unchanged despite what appear to be significant shake-ups such as this one.  "While the trend TDC for cars assembled in the US is consistent over time, both Daimler and Subaru saw significant drops in their average US content," the summary said. "This may be the result of US shortages of parts and components as the impacts of the covid pandemic created significant disruptions in automotive supply chains." Watch Ford Build a Bronco: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.