2017 Ram Promaster Low Roof 136 Wb Mobility Handicap Van Handicap on 2040-cars

Auto blog

Ram 1500 Rebel TRX reveals hood scoop-mounted marker lights

Now that the Ram 1500 Rebel TRX is testing with production bodywork, the company has been doing a thorough job of covering up the off-road super truck. But fortunately lights still show through the thick coverings, and we're finally able to see the truck's wide vehicle-denoting marker lights. As you can plainly see, they're mounted to the inside of the hood scoop. This differs from the original Ram TRX concept that had its lights mounted on the roof like a traditional heavy duty pickup truck. It also differs from the Ford F-150 Raptor's grille-mounted marker lights. Both the Raptor and the TRX have these lights not just for style, but because they're wide enough to require the amber marker lights with three in the middle and one on either side of the truck. We can't quite spot the outside marker lights for the Ram. They could be integrated into the headlights, since it seems like the turn signal is particularly wide on this truck compared with regular models. The position of these lights also matches a recent report, lending some more credibility to other claims in it. We expect the Ram 1500 Rebel TRX to be revealed by the end of the year, perhaps as soon as the Detroit Auto Show, which is still scheduled for June. We know it will have a supercharged V8, since we've heard it ourselves, and reports say it will make at least 707 horsepower like the Charger and Challenger Hellcat. It has thoroughly modified suspension for high-speed off-roading, just like the Raptor. And of course it will have four-wheel drive.  

2019 Ram 1500 spotted with split tailgate

A little over three years ago, we discovered a patent from Fiat-Chrysler that showed a pickup truck tailgate that not only dropped down like a normal one, but was also split into two swing-out halves. It appears to be a reality now, since one of the Ram 1500 prototypes shown above has just such a tailgate. The tailgate above does look a bit different from the one shown in the patent drawings. For one thing, it's not a 50/50 split in the middle. Instead, Ram seems to have opted for something like a 60/40, or maybe 70/30 split. We're not sure exactly why this is, but there could be a few advantages. For one, It probably allows for the use of the same or nearly the same handle as on conventional Rams, as well as the same badging. For another, if the tailgate operates as described in the patent, it might be possible to open just one side without opening the other, and having the shorter piece could offer some flexibility in tight areas where a larger half couldn't open fully. Testing alongside the split tailgate truck were some other Ram 1500s that had their tailgates completely covered. They did reveal some other cargo management features that should show up on the production truck, such as a return of the RamBox bedside storage compartments. One of the trucks also revealed some ribbed bedsides that would allow the positioning of a cargo divider just about anywhere in the bed. We expect to see the new Ram 1500 to be fully revealed at the Detroit Auto Show in January. In the meantime, you can check out what we believe the production truck will look like, as well as everything we know about it, here. Related Video:

Ram granted patent for in-bed ramp system

Most of the patent filings we report on these days are of a pretty high-tech nature: everything from "humanized" navigation systems to 11-speed transmissions. But cool innovations can be lower-tech and clever, too. At least that's our feeling after seeing some proposed plans from Ram. FCA has filed a patent for a system of built-in ramps recessed inside of a truck bed. While stowable ramps aren't new – Ford offers a similar system for the F-150 ­– the level of integration shown in these diagrams seems to be. Drawings show ramps that run on channels in the bed and tailgate, hinged at the end of the extended gate for a gentle upslope into the cargo area. What's more, the system seems changeable, with two ramps set wide or narrow, or just one centrally mounted. Just the thing for switching from motorcycle-loading season to snowmobile-loading season. A granted patent doesn't always lead to a product brought to market, of course. Issues with cost, durability, and demand all have a lot to say about what makes it from design to showroom. Still, we think the proposed RamRamp (feel free to use that, FCA) shows a ton of promise. Speak up truck owners, is a factory-installed ramp system like the one you see here something you'd pay for on your next vehicle? Get into Comments, below, and let us know. Related Video: Featured Gallery Ram in-bed ramps patent drawings News Source: USPTO via Allpar RAM Truck patent