2017 Ram Promaster 2500 159'' High Roof on 2040-cars

Auto blog

FCA spends $1.5 billion to retool plant for Ram production

Fiat Chrysler Automobiles (FCA) is planning to invest $1.48 billion to retool its Sterling Heights Assembly plant in metro Detroit to build the next generation of the Ram 1500. The investment will allow the assembly plant to go from unibody to body-on-frame construction. FCA also confirmed that production of the Chrysler 200 will end in December in order for the plant to be altered. As previously reported, FCA is looking to move production of the 1500 from its current assembly plant in Warren to the Sterling Heights Assembly plant (both are in Michigan). While FCA has not released any official plans for the Warren Truck Assembly Plant, Automotive News reports that the plant will be retooled to manufacture the Jeep Wagoneer and Grand Wagoneer SUVs. Earlier this month, FCA announced plans to invest $1.05 billion to retool the Jeep Wrangler factory. FCA's current investment plans are part of the automaker's push to put competitive products on the road. Related Video: News Source: FCA, Automotive NewsImage Credit: FCA Plants/Manufacturing Chrysler Jeep RAM SUV Sedan

Jeep Wrangler 4xe's hybrid powertrain: Could it be headed to other FCA products?

On its own, the 2021 Jeep Wrangler 4xe plug-in hybrid is a big deal for the brand and the model line. It's the most powerful and most efficient Wrangler by significant margins, and it doesn't give up the off-road capability that makes the Wrangler so special. But another great thing about this hybrid powertrain is its potential to be transplanted into other FCA vehicles. Just to recap, the layout of the Wrangler's hybrid powertrain, front to back, is as follows: engine, clutch, electric motor, clutch, transmission. The engine is the same 2.0-liter turbocharged four-cylinder that's a standalone engine for the Wrangler. The transmission and electric motor are sort of one unit, with the motor and clutch replacing the torque converter of the transmission. And the transmission itself is the ubiquitous eight-speed ZF automatic gearbox. Its transmission code name is 8HP75PH. The ZF eight-speed is available in every FCA product with a longitudinally-mounted engine and rear-wheel drive or four-wheel drive, with variations in the amount of power and torque it can handle. Not only that, but the Ram 1500 and 2500 and the Jeep Wrangler and Gladiator all have powertrains that utilize the non-hybrid version of the 8HP75 transmission specifically. Even the gear ratios for that transmission as well as the 8HP70 used in the Jeep Grand Cherokee, Dodge Durango, Dodge Charger and Chrysler 300 are nearly identical to those in the 8HP75PH. And a Fiat-Chrysler representative confirmed that the transmission portion of the hybrid drivetrain is basically carry-over from the regular 8HP75. So a transplant could be a relatively simple process. As for which of these models would be the most likely to receive the hybrid powertrain first, the Jeep Gladiator and Ram 1500 would seem like good bets, since they likely have the most similar transmissions, and the Gladiator in particular because of its closely-related underpinnings to the Wrangler. Both are also highly profitable trucks that sell well and could justify the development costs of adapting another powertrain. And in the case of the Ram, there's the impending F-150 hybrid to think about. Although Ram isn't going after a fully electric model, a PHEV could be a nice middle ground. A potential limiting factor would be whether the hybrid powertrain would be sufficiently robust to handle heavy payload and towing demands, particularly over longer periods.

Sunday Drive: Performance comes in many shapes and sizes

The Chevrolet Corvette has always stood out as a bastion of reasonably priced performance, and the latest 'Vette has that in spades. And while its expected starting price of around $120,000 certainly isn't cheap, it's an undeniable deal in the supercar world – remember, this thing'll do 210 miles per hour thanks to its 755-horsepower supercharged V8 engine. And did you get a load of that massive rear wing? Team Corvette's longtime foe, the Porsche 911, is similarly hellbent on ultimate performance. And as a reminder of how long the Corvette/911 rivalry has been melting tires we present the 1990 Porsche 911 as reimagined by Singer you see below. It's beautiful, it's green, and it's packing 500 air-cooled horsepower. You don't have to burn gasoline to go fast, as proven by the second-generation Tesla Roadster, which was revealed as a surprise late last week. Elon Musk says it'll be the quickest car in the world with a 0-60 time of just 1.9 seconds. And while you may not think of a semi truck when you think speed, the Tesla Semi can do 0-60 in 5 seconds flat unloaded, or in 20 seconds with a load of 80,000 pounds. Compared to today's crop of diesel semis, that's amazing. Continuing the truck theme, we present an artists rendering of what the next-generation Ram 1500 pickup may look like. Spoiler alert: Ram's mini-semi look is giving way to something much more modern. There may even be a first-of-its-kind split tailgate at the rear. And if you don't think the Ram 1500 has anything to do with performance, we should remind you that it's one of the cheapest ways to get a tire-shredding Hemi V8 engine in America. 2019 Chevy Corvette ZR1: All hail the 755-horsepower C7 king This is the first Porsche 911 to get Singer and Williams' 500-horsepower engine Tesla Roadster surprise reveal | 'Quickest car in the world' Tesla Semi Truck revealed: Here are the key details This could be the next-generation 2019 Ram 1500 2019 Ram 1500 spotted with split tailgate