Mason Dump Brand New 4x4, Hemi on 2040-cars

Auto blog

The $100,000 Winnebago Solis is a Ram ProMaster camper with a pop-top

Think of it as bunk beds for the outdoors. Maximum personal space, and the campsite has plenty of room for activities. It's an overall win-win. Camper vans with pop-tops are some of the most useful and versatile adventuremobiles out there, and now Winnebago has created its first entry into the growing market. For the first time, Winnebago is entering the Class B pop-top camper van business with the new Solis. Based on a Ram ProMaster chassis, the Solis' exterior is 19-feet-6-inches long, 8-feet-11-inches tall, and 6-feet-8-inches wide. Inside, the ceiling is 6-foot-2-inches high, and campers have access to 21 gallons of stored water. Power comes from a 280-horsepower 3.6-liter V6 and a 220-volt solar panel is integrated into the roof. In the video below, Winnebago Product Manager Russ Garfin says the goal with the Solis was to maintain durability while keeping things as simple as possible to get the job done. With the front captain's chairs swiveled around to face inward, they look at a cabin that is basic but comfortable. The driver's seat pairs with a removable swiveling plywood table with two more seats on the other side. Behind the rear passenger seats, there is a tri-purpose heated bathroom. The toilet is technically in the shower, and the space can also be used as a drying room for wet gear or laundry. The cassette toilet holds five gallons, and the shower has hot or cold water. The gray tank holds 20 gallons. Opposite the bathroom, the kitchenette is on the passenger-side wall. On the end near the door is a 12-volt compressor-driven fridge and freezer. The cooking unit also includes a countertop extension, built-in storage, a two-burner stovetop with backsplash, and a full faucet and sink. All of the insulation and plumbing on the Solis is four-season ready, as well, so adventuring can be done anywhere at any time. In the rear, the Solis has a murphy bed that flips up and out of the way. It sleeps two adults and stores a new "movable table" underneath. When the bed is up, that table can be put down to make a working space or for hanging out at the rear of the vehicle. There is also more storage under the rear floor space. Doubling the sleeping space is the fiberglass pop-top. The roomy space sleeps two more adults and is easily accessible thanks to a folding ladder that can be stored above the driving cabin. The Solis simplifies the camping experience by packaging full amenities and lots of sleeping space within a small van.

2019 Ram 1500 spotted with split tailgate

A little over three years ago, we discovered a patent from Fiat-Chrysler that showed a pickup truck tailgate that not only dropped down like a normal one, but was also split into two swing-out halves. It appears to be a reality now, since one of the Ram 1500 prototypes shown above has just such a tailgate. The tailgate above does look a bit different from the one shown in the patent drawings. For one thing, it's not a 50/50 split in the middle. Instead, Ram seems to have opted for something like a 60/40, or maybe 70/30 split. We're not sure exactly why this is, but there could be a few advantages. For one, It probably allows for the use of the same or nearly the same handle as on conventional Rams, as well as the same badging. For another, if the tailgate operates as described in the patent, it might be possible to open just one side without opening the other, and having the shorter piece could offer some flexibility in tight areas where a larger half couldn't open fully. Testing alongside the split tailgate truck were some other Ram 1500s that had their tailgates completely covered. They did reveal some other cargo management features that should show up on the production truck, such as a return of the RamBox bedside storage compartments. One of the trucks also revealed some ribbed bedsides that would allow the positioning of a cargo divider just about anywhere in the bed. We expect to see the new Ram 1500 to be fully revealed at the Detroit Auto Show in January. In the meantime, you can check out what we believe the production truck will look like, as well as everything we know about it, here. Related Video:

Fiat Chrysler dumped 40,000 unordered vehicles on dealers

In a move that echoes recent history, Fiat Chrysler has been making more cars and trucks than dealers in the U.S. are willing to accept, with Bloomberg reporting that at one point the automaker had built up a glut of around 40,000 unordered vehicles. That’s led some dealers to accuse FCA of reviving the dreaded “sales bank” accounting practice of obscuring inventory to improve the balance sheet. The company reportedly began building up its inventory of unordered cars this summer despite an industrywide slowdown in sales and an eagerness by some dealers to thin their inventories because rising interest rates are making it more expensive to hold unsold cars. The inventory build-up also coincided with Fiat ChryslerÂ’s efforts to find a merger partner, first with Renault, which fell through, then last monthÂ’s announcement that it will merge with FranceÂ’s PSA Group. FCA denies any such scheme and tells Bloomberg the rising inventory is down to a new predictive analytics system designed to better square supply with demand from dealers that is helping the company save money and narrow the numbers of unsold vehicles. The company recently agreed to pay a $40 million civil penalty to the U.S. Securities and Exchange Commission to settle a complaint that it paid dealers to report fake sales figures over a span of five years. While no one is suggesting that FCA is in dire financial straits — the company saw higher than expected earnings in the third quarter and record profits in North America — the practice has strong historical precedent by Chrysler, which built up bloated inventories in the run-up to its two federal bailouts, in 1980 and 2009. It was also common at GM and Ford during the 2000s, when all three Detroit automakers struggled with excess manufacturing capacity and plummeting sales in the lead-up to the Great Recession. Back in 2012, CFO Magazine wrote about a report that explained automakersÂ’ rationale for the practice and how it works: Say fixed costs for a given factory are $100, and that the factory can make 50 cars. Consumers, however, demand only 10. Under absorption costing, if the company makes all 50 cars, its cost-per-car is $2. If it makes only up to demand, or 10 cars, the cost-per-car is $10. Although each car adds variable costs for steel and other parts, if those costs are low, the company still has an incentive to make more cars to keep the cost-per-car down.