Dodge Ram 6-speed Manual Stick Shift Cruise Sirius B&w Hitch Spray Liner on 2040-cars
San Antonio, Texas, United States
Ram 3500 for Sale
6.7l i6 diesel st lifted off road tires black rims 8ft bed tow gooseneck cd 4x4
2013 st used turbo 6.7l i6 24v automatic 4wd pickup truck
12 dodge ram 3500 lifted 4x4 laramie cummins diesel nav heated & cooled seats
Dodge ram mega cab laramie 4x4 cummins diesel custom new lift wheels tires nav
Dodge ram mega cab laramie 4x4 cummins diesel custom new lift wheels tires nav
2014 gray cloth i6 cummins turbo diesel lifetime powertrain warranty(US $43,886.00)
Auto Services in Texas
Yang`s Auto Repair ★★★★★
Wilson Mobile Mechanic Service ★★★★★
Wichita Falls Ford ★★★★★
WHO BUYS JUNK CARS IN TEXOMALAND ★★★★★
Wash Me Down Mobile Detailing ★★★★★
Vara Chevrolet ★★★★★
Auto blog
Italian coachbuilder wraps a modern-day Citroen van in a retro skin
Tue, Oct 6 2020Italian coachbuilder Caselani resurrected an obscure, often-forgotten model from Citroen's past to offer van buyers an additional retro-styled option. Called Type HG, it's based on the current-generation Citroen Jumpy. One of the French carmaker's best-known vintage vans is the Type H, which was built with only minor changes from 1947 to 1981. It's aged into a sought-after classic that's popular as a food truck and as a camper from Paris to Sydney. Few realize Citroen planned to release a smaller model named Type G which looked almost exactly like the H but used an air-cooled flat-twin engine shared with the 2CV. Several prototypes were made, but the project was canned in favor of the 2CV-based, nine-horsepower AU van released in 1951. It's this little-known prototype that only exists in Citroen's official heritage collection and in the minds of the most indoctrinated French car enthusiasts that Caselani chose to bring into the 21st century. And, because the Type G (shown below) was a shrunken copy of the Type H from a design standpoint, making a body kit that fits the Citroen Jumpy was relatively simple. Caselani liberally borrowed styling cues from its modern version of the Type H, which is based on the larger Citroen Jumper sold as the Ram ProMaster in the United States. It adds a new-look front end with a vertical grille, chromed chevrons, and round headlights positioned as far out of the body as regulations permit, corrugated body panels, and a redesigned rear end. Whitewall tires are optionally available. Caselani offers the Type HG as a passenger van, a crew-cab van, and a panel van. Pricing starts at 29,400 euros before taxes are factored in, a sum that represents about $35,000 and that corresponds to a short-wheelbase panel model powered by a 100-horsepower, four-cylinder turbodiesel engine. Alternatively, motorists who already own a Jumpy can purchase the transformation kit on its own for 14,800 euros (about $17,500). For added peace of mind, Caselani pointed out the conversion was created with Citroen's input, and the brand authorized the kit. We know what you're thinking: what on earth is a Jumpy? Glad you asked! It's a van positioned in the middle of Citroen's commercial range. It slots between the Berlingo, which competes in the same segment as the Ford Transit Connect, and the Jumper, which is marketed as an alternative to the Ford Transit.
More Ram trucks recalled over tailgate issue
Wed, May 29 2019Almost a year ago Fiat Chrysler recalled roughly 1.6 million Ram trucks over an issue with the locking power tailgate. The actuator limiter tab for the power locking mechanism could fracture, which would permit the actuator's lock-rod control to move beyond its limits. That would pull the locking rods open, thereby allowing the tailgate to open at any time. The 2018 recall covered Ram 1500, 2500, and 3500 pickups from the 2015 to 2017 model years, with the five-foot-seven and six-foot-four beds and the power locking tailgate option. Trucks with eight-foot beds, and those with manual-locking tailgates, were excluded. The trucks with eight-foot beds have been added to the recall as of earlier this month, putting 410,351 more trucks in the pool. According to Consumer Reports, Ram redesigned the locking assembly on the other two shorter bed sizes for trucks built after August 2, 2017, which was the end of the 2017 model year. But the eight-foot long-bed trucks didn't get the redesigned part until April 2, 2018 for some reason, making all eight-foot-bed pickups from the 2015 model year to April 1, 2018 part of the recall equation. FCA says it's not aware of any accidents or injuries because of the issue. The company plans to notify owners on June 28. The paperwork filed with the National Highway Traffic Safety Administration doesn't advise owners to stop driving the trucks, but nor does it instruct owners on how to address the problem in the meantime. Sounds like bungee cords might be the go. The fix is estimated to take 30 minutes at the dealer and entails removing the tailgate cover and installing a stop block to prevent the locking actuator's pivot arm from traveling too far. FCA says it will reimburse owners for any other repairs made to address the problem. Meanwhile, owners can contact Fiat Chrysler Automobiles customer service at 800-853-1403, and refer to FCA's number for this recall, V44. The NHTSA campaign number is 19V-347. Last year's recall comes under FCA number U74, and NHTSA campaign number 18V-486. Ram's not alone on this field. The NHTSA continues to investigate the 2017 Ford Super Duty pickups for a similar issue.
Fiat Chrysler and the UAW reach tentative labor deal
Sat, Nov 30 2019DETROIT — Fiat Chrysler Automobiles and the United Auto Workers (UAW) union on Saturday announced a tentative agreement for a four-year labor contract, a boost for the automaker as it works to merge with France's Groupe PSA. Italian-American Fiat Chrysler and PSA, the maker of Peugeot and Citroen, last month announced a planned $50 billion merger to create the world's fourth-largest automaker. The tentative agreement with Fiat Chrysler, which is subject to ratification by the union members, follows contracts that the UAW already concluded with Ford Motor Co and General Motors Co. The deal with GM followed a 40-day strike in the United States that virtually shuttered GM's North American operations and cost the automaker $3 billion. The UAW on Saturday said the contract with Fiat Chrysler included a commitment from FCA to invest $9 billion, creating 7,900 new jobs over the course of the four-year contract. Of the $9 billion, $4.5 billion was announced earlier this year, to be invested in five plants and creating 6,500 jobs. Detailed terms of the tentative agreement were not released, but they are expected to echo those under the new contracts with GM and Ford, as the UAW typically uses the first deal as a pattern for the others. "FCA has been a great American success story thanks to the hard work of our members," UAW acting President Rory Gamble said in a statement. "We have achieved substantial gains and job security provisions for the fastest growing auto company in the United States." Ratification is not a sure thing. Rank-and-file UAW members at FCA in 2015 rejected the first version of a contract. In addition, a lawsuit related to a federal corruption probe could also raise doubts among union members about the terms agreed. The federal corruption led GM to file a racketeering lawsuit against FCA, alleging that its rival bribed union officials over many years to corrupt the bargaining process and gain advantages, costing GM billions of dollars. FCA has brushed off the lawsuit as groundless. Under the UAW's deal with GM, the automaker agreed to invest $9 billion in the United States, including $7.7 billion directly in its plants, and to create or retain 9,000 UAW jobs. Ford's contract included commitments to invest more than $6 billion in its U.S. plants and to create or retain more than 8,500 UAW jobs. The deals with GM and Ford also created a pathway to full-time employment for temporary workers and left healthcare insurance coverage unchanged.
