Dodge 3500 5.9 Diesel Flatbed on 2040-cars

Auto blog

Ram increasing EcoDiesel production [w/video]

The Ram 1500 EcoDiesel shot out of the gate with strong sales by filling its initial allocation of 8,000 orders in just three days, in February. At the time, Ram expected that the oil-burning variant would account for around 10 percent of 1500 output, but it knew there was room to grow if the demand was there. Apparently it is, as the truck maker is doubling the diesel's production mix for the 2015 model year to 20 percent of the pickup's total volume.
Since hitting the market, the EcoDiesel has been a smashing success, according to Ram. The company claims that nearly 60 percent of its sales have been conquests from other truck brands, and its popularity has boosted the 1500's average transaction price, as well. In an accompanying video, brand president Bob Hegbloom said that customers have been demanding more of them.
"Innovation sometimes comes with risk, but being first to market with a diesel engine for the half-ton segment has shown to be a great decision for the Ram Brand," said Hegbloom in the company's release.

FCA recalls 2019-20 Ram 2500 and 3500 trucks for transmission fluid leak

Once transmission fluid goes into the transmission, there's a general expectation that it will stay inside. On some 2019-2020 Ram 2500 and 3500 trucks, that ain't happenin'. Fiat Chrysler Automobiles (FCA) and the National Highway Traffic Safety Administration (NHTSA) opened a recall campaign on January 24,  due to transmission fluid leaking from the dipstick tube on vehicles with a six-speed automatic (codenamed 68RFE) transmission.  NHTSA recall No. 20V043000 states that 84,978 trucks are potentially affected. On select Ram work trucks, "a buildup of pressure and heat inside the transmission may result in a transmission fluid leak." Due to the location of where the leak might occur, the transmission fluid could drip onto the nearby turbocharger or "another ignition source within the engine compartment." Should this occur, it's a fire risk. The recall breaks down to 64,590 units of the 2500 pickup and 19,612 of the 3500. FCA estimates that only 1% of the roughly 85,000 vehicles have the defect.  As a fix, Chrylser will replace the transmission valve body separator plate and reprogram the powertrain control module. Chrysler will officially begin the recall process on March 14, and all owners will be notified. Related Video:    

Recall: The Ram 1500's driveshaft could fall off

Ram is recalling 10,160 pickups built for the 2018 and 2019 model years, because the driveshaft may fall off. That would be bad. The recall involves the previous-generation truck. Specifically, some units of the normal 2018 Ram 1500 and some of the 2019 Ram 1500 Classic. In Ram-speak, "Classic" means the previous-generation truck that's sold alongside the all-new version for 2019. The trucks involved were built in a month-long time period in 2018, and Ram has identified the problematic driveshafts by part number. Apparently, the rear driveshaft may "have an incomplete weld fusion between the tube and tube yoke, which may lead to weld cracking or the driveshaft fracturing," according to the recall documents. This could cause the driveshaft to drop off the vehicle, and cause you to lose drive power (among other hazards involved with a driveshaft falling off a truck). At this point, FCA says it's not aware of any accidents or injuries related to the problem. However, it has seen eight occurrences of the driveshafts breaking, prompting this voluntary safety recall. Ram says that an extra noise or vibration could signal that the driveshaft is on the way out. FCA is going to start notifying owners about the recall in mid-June. When you take your truck in, the dealer will replace your driveshaft with one verified to have complete weld fusion. It will, of course, be free of charge to the owners of the affected vehicles.