Crew Cab Laramie 4x4 Cummins Diesel Custom New Lift Wheels Tires Nav Leather on 2040-cars

Auto blog

2019 Ram 1500 prices released: What pickup will cost, by trim

One of the final pieces of information about the 2019 Ram 1500, and one of the most important, is finally here: the price. A base model Ram Tradesman, which nets a V6, the smaller four-door cab, a 6-foot 4-inch bed and two-wheel drive, starts at $33,340 with destination charge. That's a a bit over $1,000 more than the cost of the same outgoing Ram 1500 Tradesman. But you'll also get new features such as the eTorque mild-hybrid system and a touch-screen infotainment system with Uconnect. At the other end of the spectrum, the top-rung Ram 1500 Limited Crew Cab 4X4 V8 now starts at $59,035, an increase of almost $4,400 over the old model. Although the base price of the most basic and the most opulent Ram 1500s have gone up, some other things have become cheaper. You won't have to pay as much to upgrade to a V8, for instance. The plain 5.7-liter V8 with its 395 horsepower is $255 cheaper now, costing $1,195. To get that engine with the eTorque system costs more at $1,995. The RamBox bed-side storage bins are $300 cheaper now at $995. The Rebel trim has a better entry-level price, too. The base version with the smaller cab, four-wheel drive (the only drivetrain available with the small cab) and V6 with eTorque starts at $46,340. That just slips under the $46,690 price of the outgoing base Rebel with two-wheel-drive, and is over $2,000 less than the old Rebel with four-wheel drive that started at $48,790. Of course, the outgoing model was only available with the larger "Crew Cab" four-door body. Adding that larger body to the new Rebel will probably offset the cost savings. Here's the entire 2019 Ram sheet of base prices by trim/configuration: Related Video:

All hail the Hellephant, Mopar's 1,000-horsepower crate engine

It's shocking to say this, but the all-powerful Dodge Demon looks weak now that Mopar has unleashed the Hellephant. This crate motor makes 1,000 horsepower and 950 pound-feet of torque, and its name is a combination of the nickname for the old 426-cubic-inch Hemi V8 and, obviously, the Hellcat. This monster is a 426-cubic-inch version of the current third-generation Hemi V8 topped by a supercharger similar to what the Hellcat line packs. Everything is cranked up to — or perhaps, past — 11. The engine block is made of aluminum and weighs 100 pounds less than the equivalent iron block. All of the internals are forged. The stroke and bore have been increased. The supercharger produces 15 pounds of boost and displaces 3 liters; more than the 2.7-liter blower on the Demon and the 2.4-liter blower on the Hellcat. And as big and powerful as it is, it will still rev to 7,000 rpm. It's a thoroughly monstrous motor, but shockingly, it won't be that difficult to live with. For one thing, Mopar will offer a complete kit to get the engine up and running, including an engine computer, wiring harness and drive-by-wire throttle. It also runs on 93-octane pump gas. That's especially amazing considering the Demon engine "only" makes 840 horsepower, and that's on race gas with 100+ octane fuel. It also has us wondering what the Hellephant could make on racing fuel. The Mopar folks did say that there's room to add more power. Pricing wasn't announced for the Hellephant engine. The Hellcat crate engine retails at $19,350 directly from Mopar, so it's safe to assume that the Hellephant will go for more. The installation kit with the computer and harness will be an extra charge of likely over $2,000, based on the Hellcat kit. The engine and the kit will be available in the first quarter of 2019. Related Video: Featured Gallery Hellephant Crate Engine SEMA Show Chrysler Dodge Jeep RAM Performance dodge demon hellephant

Chrysler recalls AWD 300, Charger, Ram 1500 over ZF transmission

What do the Chrysler 300, Dodge Charger and Ram 1500 all have in common? Yes, they're all Chrysler products, and two of them are based on the same platform. And we're sure you could find more similarities between them all, but the common trait we're looking at here is that, while they all come standard in rear-drive form, they're also available with all-wheel drive. And it's the transmission in those models that's the subject of the latest recall notice issued by the National Highway Traffic Safety Administration.
The output shaft on the eight-speed automatic transmission supplied by ZF to Chrysler for the AWD versions of the 300, Charger and Ram 1500 is apparently prone to fracture. That in the end could leave the vehicle without power and could, according to the NHTSA investigation, increase the chance of a crash. The vehicle could also roll away if even if left in Park without the handbrake applied.
That's why Chrysler is calling in 4,194 examples of those three models from the 2013 model year. Dealers will be responsible for inspecting the transmissions and, where necessary, replace the entire unit. See the full recall notice below for all the details.