2023 Ram 3500 Laramie Longhorn on 2040-cars

Auto blog

Recall: The Ram 1500's driveshaft could fall off

Ram is recalling 10,160 pickups built for the 2018 and 2019 model years, because the driveshaft may fall off. That would be bad. The recall involves the previous-generation truck. Specifically, some units of the normal 2018 Ram 1500 and some of the 2019 Ram 1500 Classic. In Ram-speak, "Classic" means the previous-generation truck that's sold alongside the all-new version for 2019. The trucks involved were built in a month-long time period in 2018, and Ram has identified the problematic driveshafts by part number. Apparently, the rear driveshaft may "have an incomplete weld fusion between the tube and tube yoke, which may lead to weld cracking or the driveshaft fracturing," according to the recall documents. This could cause the driveshaft to drop off the vehicle, and cause you to lose drive power (among other hazards involved with a driveshaft falling off a truck). At this point, FCA says it's not aware of any accidents or injuries related to the problem. However, it has seen eight occurrences of the driveshafts breaking, prompting this voluntary safety recall. Ram says that an extra noise or vibration could signal that the driveshaft is on the way out. FCA is going to start notifying owners about the recall in mid-June. When you take your truck in, the dealer will replace your driveshaft with one verified to have complete weld fusion. It will, of course, be free of charge to the owners of the affected vehicles.

2020 Ram 3500 heavy duty interior spied

The 2020 Ram 2500 and 3500 trucks continue their steady testing regimen, and the engineers are still keeping the trucks under careful wraps. Or at least they are with the outside. As the photos above show, some test drivers got a little sloppy with interior coverings, and our spy photographer took advantage of the situation. And the good news is that the interior will be basically identical to that of the 2019 Ram 1500. We say good news because the Ram's stylish interior and well-thought-out controls are part of why it's our favorite fullsize pickup right now. This particular model has the 8.4-inch UConnect touchscreen infotainment. Since the entire center stack is the same as the 1500, we wouldn't be surprised if the monster 12-inch display were to be available on high-end trims. The small 5-inch infotainment will probably be the standard option. Another interesting detail is that this test truck does not have the rotary shift dial shared with the Ram 1500 and various other Chrysler products. Instead, it has a traditional steering column-mounted shift lever. As for the outside, nothing new is revealed to us. We shouldn't have to wait too long to see the production truck, though. We expect it to be revealed early next year. What we've seen so far seems to indicate that the heavy duty Rams will have styling a little closer to the old model than to the new 1500. Still, expect grilles and other cues from the lighter duty model, just translated to a slightly different shape. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Maxwell RHEV Prototype First Drive Review | More than meets the eye

The Maxwell RHEV looks just like any small business' panel van, sporting large vinyl graphics and unassuming steel wheels. You'd have no idea that the co-founders of the startup based out of Seattle had grafted a salvaged Voltec powertrain from a junkyard Chevy Volt into this Ram ProMaster. Somewhere, a battery pack lurks. Maxwell's co-founders, CEO Max Pfeiffer and engineer Trey Camp, open the cargo area to reveal a completely unaltered space. Both are ex-Tesla employees with a long fascination for the #vanlife movement – that their interests intersected in a hybrid cargo van isn't surprising once you start talking to them. This is their first vehicle, a salvaged ProMaster sidelined with a blown 3.6-liter Pentastar, and it's both their prototype and the only Maxwell in existence right now. That said, the company is building a low-roof version for a customer, which will be lighter, have less aero drag and therefore be more efficient. The company is just emerging from a stealth startup mode, and while their backstory is fascinating, I'm still wondering where the Volt's 18.4 kWh battery pack is. "There's nothing in the back ... we're able to get the battery underneath the floor, in the center," Pfeiffer says. Ducking my head under the side reveals, sure enough, a little underside blister that contains the battery, tucked up neatly. The other changes to the RHEV – short for Range-extended Hybrid Electric Vehicle – are minimal. He pops the hood. There are some rough edges, but the 1.5-liter, 101-horsepower engine and 48-kW motor fit comfortably on custom engine mounts and with re-routed exhaust, behind a fascia that improves aero and houses the charge port. Custom axles send power to unaltered Ram hubs and brakes. "This version, it's a little bit prototype-y," Pfeiffer says. "We've had more time to work with the CAD [computer-aided design, engineering drawings] we were able to get from GM and Chrysler, and we've done a better job packaging for production." GM already spent billions on the Voltec and its controlling software, and Maxwell can happily ride those coattails. Despite the help GM has lent Maxwell, there are no official ties. An emulator sends spoofed signals to the Ram instruments, which have a new custom-printed face. The Ram's body control module is left alone. For powertrain faults, Maxwell says the vehicle can theoretically be serviced by any Chevy dealer, and any issue with the rest of the vehicle can be handled by a Ram service shop.