2022 Ram 3500 on 2040-cars

Auto blog

Towing with the 2016 Ram lineup [w/video]

I do not tow things. Ever. Yet I recently found myself at the Fiat Chrysler Automobiles proving grounds in Chelsea, MI, where I'd be testing the hauling capabilities of Ram's current product range. This experience was not only a perfect education for a towing novice like me, but allowed me to tow far more weight than I'd ever consider hauling the real world, and all within the safe confines of the Chelsea Proving Grounds. There was an extremely diverse array of vehicles at my disposal, including Ram's gasoline- and diesel-powered offerings with trucks ranging from the 1500 on up through the 5500 Chassis Cab, as well ProMaster vans. Beyond that, FCA brought out a number of vintage Dodge pickups for me to play with, while also working with Case IH to provide a track-loader I could test. I put together a range of videos covering everything from the classics to the production trucks to the construction equipment. And despite some technical difficulties – you'll notice a distinct lack of in-car videos, with blame going to a corrupted micro SD card – I've assembled ten videos that give an up-close look at Ram's offerings. 2015 Ram ProMaster City Let's start small. The ProMaster City only has a towing capacity of 2,000 pounds. That's a reasonably impressive figure for a van that uses the same powertrain as a Chrysler 200. The 2.4-liter four-cylinder and nine-speed automatic weren't really bothered with the extra weight added by the trailer. Even when accelerating at freeway speeds, the ProMaster City didn't feel out of breath or hampered by its load. That said, the rear of the van was unloaded, which probably wouldn't be the case for most consumers. It's unclear how the City would feel if its driver were taking advantage of the max payload (1,883 pounds) and towing. 2015 Ram ProMaster 1500 To be polite, the Ram ProMaster is a difficult vehicle to like. Its awkward seating position is bus-like and lacks the visibility enjoyed by the Ford Transit or the utter driving comfort of the Mercedes-Benz Sprinter. Its 3.0-liter, four-cylinder turbodiesel engine, meanwhile, is something of an anomaly. While it's potent for a four-cylinder diesel, producing 295 pound-feet of torque and 174 horsepower, those numbers don't feel all that impressive when loaded down. The model I tested was barely using half of its 5,100-pound maximum towing weight and was loaded down with just 500 of its 3,620-pound payload. Yet it lacked the pluckiness of the smaller City.

Ram 'Built to Serve' special editions honor five U.S. military branches

Ram has just announced a series of special-edition trucks that honor the five branches of the U.S. military and the roughly 7% of Americans who currently serve or are veterans. Called the "Built to Serve" editions, five trucks released over the next year will come in exclusive liveries and offer exclusive options to commemorate the Army, Navy, Air Force, Marines and Coast Guard. Available on every bodystyle and powertrain, a Built to Serve package will add $2,795 to the price. Ram hasn't said which branch the first truck honors, but that pickup will debut tonight — Wednesday, Nov. 6 — at the “Stars and Strings” concert at the Fox Theater in Detroit.  Each of the five comes in one of two special colors chosen to "evoke the spirit, the mission and history of that service," and a limited build number. The colors and quantities are: Gator (1,000) and Diamond Black (1,000) Ceramic Gray (1,000) and Patriot Blue (1,000) Anvil (1,000) and Billet Silver (1,000) Tank (1,000) and Flame Red (1,000) Spitfire (500) and Bright White (500) The interiors are set off with contrasting stitching in either Light Frost, Light Ambassador Blue, Light Diesel Gray, Core Green, or Orange. Built to Serve trucks will be known by their U.S. flag and edition decals on the rear quarter panels. Cosmetic upgrades for all five versions include an all-black grille and surround, black badging, side steps, black four-inch exhaust tips, body-colored wheel arch trim, and 20-inch wheels finished in Technical Gray. The option price adds the Off-Road Group, normally a $795 extra, including features like four underbody skid plates, electronic-locking rear axle, off-road shocks, tow hooks, and all-terrain tires.  Special features in the cabin come in the Black Onyx Chrome trim, Velcro panels on the front and sides of the front seats for service patches, PALS/MOLLE webbing to hang pouches on the front seatbacks, lockable front center tunnel storage, all-weather floor mats, and an instrument panel badge. Ram will use the trucks to help bring more attention to an initiative the automaker has run since 2015, also called Built to Serve, that works to organize grassroots volunteer efforts. Between now and Veteran's Day on Nov. 11, 2020, the Built to Serve program wants to log 1.3 million volunteer hours. That figure represents one hour for each active member of the five services.

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.