2014 Ram 3500 Tradesman on 2040-cars

Auto blog

The $100,000 Winnebago Solis is a Ram ProMaster camper with a pop-top

Think of it as bunk beds for the outdoors. Maximum personal space, and the campsite has plenty of room for activities. It's an overall win-win. Camper vans with pop-tops are some of the most useful and versatile adventuremobiles out there, and now Winnebago has created its first entry into the growing market. For the first time, Winnebago is entering the Class B pop-top camper van business with the new Solis. Based on a Ram ProMaster chassis, the Solis' exterior is 19-feet-6-inches long, 8-feet-11-inches tall, and 6-feet-8-inches wide. Inside, the ceiling is 6-foot-2-inches high, and campers have access to 21 gallons of stored water. Power comes from a 280-horsepower 3.6-liter V6 and a 220-volt solar panel is integrated into the roof. In the video below, Winnebago Product Manager Russ Garfin says the goal with the Solis was to maintain durability while keeping things as simple as possible to get the job done. With the front captain's chairs swiveled around to face inward, they look at a cabin that is basic but comfortable. The driver's seat pairs with a removable swiveling plywood table with two more seats on the other side. Behind the rear passenger seats, there is a tri-purpose heated bathroom. The toilet is technically in the shower, and the space can also be used as a drying room for wet gear or laundry. The cassette toilet holds five gallons, and the shower has hot or cold water. The gray tank holds 20 gallons. Opposite the bathroom, the kitchenette is on the passenger-side wall. On the end near the door is a 12-volt compressor-driven fridge and freezer. The cooking unit also includes a countertop extension, built-in storage, a two-burner stovetop with backsplash, and a full faucet and sink. All of the insulation and plumbing on the Solis is four-season ready, as well, so adventuring can be done anywhere at any time. In the rear, the Solis has a murphy bed that flips up and out of the way. It sleeps two adults and stores a new "movable table" underneath. When the bed is up, that table can be put down to make a working space or for hanging out at the rear of the vehicle. There is also more storage under the rear floor space. Doubling the sleeping space is the fiberglass pop-top. The roomy space sleeps two more adults and is easily accessible thanks to a folding ladder that can be stored above the driving cabin. The Solis simplifies the camping experience by packaging full amenities and lots of sleeping space within a small van.

Autoblog Podcast #339

Farewell, Zach Bowman; Pikes Peak 2013; Datsun; 2014 Ram lineup
Episode #339 of the Autoblog Podcast is here, and it's the last rodeo for Zach Bowman before he departs for other pastures. The crew this week consists of Dan Roth, Zach Bowman and Jeff Ross, who talk about the astounding records set at this year's Pike's Peak hill climb, the return of the Datsun brand name and the recently-announced 2014 Ram truck lineup. Of course, we start with the garage and end with your questions and comments. For those of you who hung with us live on our UStream channel, thanks for taking the time. You can follow along after the jump with our Q&A. Thanks for listening!
Autoblog Podcast #339:

Ram ramping up MI truck production, does deal with Texas Rangers

Thanks to a host of upgrades at the Warren Truck Assembly Plant in Michgan, Ram Trucks is boosting production of the already strong-selling Ram 1500 to build 28,585 more of them a year. That works out roughly to five more per hour, or an additional 100 per day. The major key to the improvements was redesigning 353 assembly workstations to allow employees complete their tasks more efficiently. According to Ram, the expansion was done to meet growing demand for the pickup.
These kinds of comprehensive changes can't happen over night, obviously. From the end of 2013 through the summer shutdown in August, the Warren Truck plant received automation tweaks in the body shop and upgrades to the color booths in the paint shop.
However, the biggest shift was working with "UAW-represented team leaders and operators" to examine every workstation for efficiency improvements. In that analysis, the company identified and altered over 100 problems that could have caused an injury. What really helped to boost the production rate so significantly was moving about 300 parts, or grouping them into kits for better ergonomics, and eliminating walks to grab tools. Once everything was done, about 63 percent of workers at the factory got updated training.