2014 Ram 3500 Tradesman on 2040-cars

Auto blog

1.8 million Ram trucks recalled to fix shifter problem

Fiat Chrysler is recalling 1.8 million mostly heavy-duty Ram pickups to fix a part that could allow the truck to shift out of park and roll without depressing the brake pedal, a problem the automaker knows to be potentially related to seven injuries and a "small number" of accidents. The company says tests revealed that the interlock, which is supposed to keep the transmission from shifting out of park without the driver's foot on the brake and without a key in the ignition, may malfunction if subjected to high temperatures for long periods. The recall is limited to vehicles equipped with shifters mounted on the steering columns; those with rotary-dial shifters or floor-mounted shifters aren't affected, and model-year 2017 trucks built after Dec. 31, 2016, are excluded. Trucks covered by the recall are certain 2010-2017 Ram 2500 and 3500 pickups; 2011-2017 Ram 3500, 4500 and 5500 chassis cabs; and 2016 and 2017 Ram 3500 chassis cabs of less than 10,000 pounds gross vehicle weight. Certain 2009 through 2017 Ram 1500 pickups are also included in the recall. Most of the affected trucks are in the U.S., with the rest in Canada and Mexico, plus about 15,000 outside of the North American Free Trade zone. FCA recommends that customers always use parking brakes and not leave children unattended in parked cars.Related Video: Featured Gallery Mojave Road in a 2017 Ram 2500 Power Wagon View 31 Photos Recalls RAM Truck ram 5500 ram 4500

FCA recalls 2 million Ram trucks over airbag issues

Airbag issues have prompted Fiat Chrysler Automobiles to issue another pair of recalls. The two separate issues both affect Ram pickups, one campaign stemming from oversensitive sensors, the other from a wiring harness. Between them, the problems affect an estimated combined total of some 2 million units. The first recall affects 2013-15 Ram 1500, 2500, and 3500 trucks, specifically four-door models, manufactured between June 20, 2012, and January 26, 2015. The calibration of the side impact sensor in those affected units may to be too sensitive. As a result, if the door is slammed too hard, the side-curtain airbag and seatbelt pre-tensioner may inadvertently activate. FCA reports that this issue affects an estimated 667,406 units in the United States, plus 153,011 in Canada, a further 8,272 in Mexico, and another 14,847 in markets outside of North America, amounting (in Chrysler's estimation) to less than 0.005 percent of those vehicles produced. The automaker says it is aware of two minor injuries (but no accidents) that may have resulted from the glitch, and is taking action to have the Occupant Restraint Control module recalibrated in the affected units. The second issue also affects Ram pickups, including 1500, 2500, 3500, 4500, and 5500-series models from the 2012 to 2014 model years, built between January 18, 2011, and October 7, 2014, and fitted with the optional Electronic Vehicle Information Center. The problem here stems from a wiring harness in the steering wheel that may rub against a retainer spring in the air bag control module, which in turn could cause an electrical short and deploy the driver's side air bag unexpectedly. In the United States alone, the issue is estimated to affect 1,060,531 units, which will need to be inspected and, where necessary, have their steering wheel wiring harnesses secured, with protective caps added to the ends of the airbag retainer spring. These do not represent the first issues we've seen from Fiat Chrysler in recent days. The automaker recently issued a recall for approximately 1.4 million vehicles to have their Uconnect software updated to prevent hacking. A few days ago it also announced a recall for 350,000 Dodge Journey (and Fiat Freemont) crossovers to secure loose engine covers. And the National Highway Traffic Safety Administration is expected to issue Fiat Chrysler Automobiles a $105-million fine for mishandling other recent recalls and safety issues.

Chrysler set to make $266M-investment into 8-speed transmission production

Chrysler will shortly make a significant $266-million investment into its Kokomo, IN transmission factory in a bid to expand production of its eight-speed automatic transmissions. The gearboxes, which are built under license from Germany's ZF Friedrichshafen, have been well received by customers and critics, and according to an SEC filing obtained by Automotive News, the transmissions will eventually find their way to all of Chrysler's rear-drive offerings (Viper and heavy-duty Ram models, aside). According to AN, a Chrysler spokesman says the investment has not been confirmed, but once it is, it'll mark the company's latest in a growing line of investments at the facility. Chrysler has poured $1.5 billion into Kokomo since 2009.