2013 Laramie New Turbo 6.7l I6 24v Manual 4wd on 2040-cars

Auto blog

Ram debuts Rumble Bee redux at Woodward [w/video]

Ten years ago, when the Ram truck still wore a Dodge badge, a special yellow-and-black model called the Rumble Bee launched, paying homage to the Super Bee muscle car of the 1960s. Now, we have the Charger Super Bee, wearing the same buzzworthy paint job. But for the 2013 Woodward Dream Cruise, Ram has created a modern version of that Rumble Bee pickup based on the current 2013 Ram 1500, though unlike the last go-around, this one is purely a concept. For now, anyway.
This concept truck uses the 1500's lightest configuration - a single cab, two-wheel-drive model. From there, it has been painted in Drone Yellow with a matte finish, and a Mopar ground effects kit gives the truck a more aggressive stance on the road. The large, 22-inch wheels certainly help that, as well, painted in black to match the other dark accents found around the pickup's body.
Inside, to no one's surprise, the black and yellow theme carries on, with leather upholstery and sport mesh seats. That Rumble Bee logo adorns the chairs and floor mats, but the coolest (or weirdest) touch is the actual amber-encased bee found within the rotary shift knob. Seriously.

A beginner's guide to plowing snow with a heavy-duty truck

I live in a desert, so the only things getting plowed around here are mud flows and brewer neighbors. But I enjoy machinery and haven't plowed any snow since a "loaded" truck meant one with A/C and a CD player, so I jumped at the chance for a plow primer in a Ram HD on a Canadian airfield. Running a plow is like welding – the basics come quickly but experience pays dividends. The first thing to deal with is a frequently changing horizon because, stout as they are, even three-quarter-ton heavy-duty trucks will move up and down in front considerably with a 600-to-800-pound plow hanging off, and fast plow hydraulics rival some low-riders for bounce effect. Getting going is easy unless you forgot blocks and the plow froze to the ground, rookie. If you have to drive to your plowing assignment, blade height needs some experimentation to find the best cooling airflow; if you think sub-freezing temperatures negate that concern, remember you've installed what amounts to a 20-square-foot air brake up front that the truck has to overcome, and blowing snow could block some cooling air passages. Whether it's a "straight" blade or V design, always have it tilted to the right lest you catch a hidden post, solid mailbox, or edge of a snow bank. Most plow operators I spoke to rarely exceed 45 mph in transit because of cooling, front suspension travel, and common sense, and you should go even slower if you don't have some ballast like chains, extra fuel tanks, or a salt spreader to balance the load on the back. With trucks' relatively slow steering and all that weight up high, oversteer is best avoided. With a little clean space to get a run, stick it in Drive to gather momentum and lower the plow simultaneously to float, where the weight of the plow rests on and lets it run along the surface. Momentum is good until you hit something you didn't know about, at which point the plow's breakaway systems limit damage but your truck could still hit something big; caution never hurts. Start out at 10 to 15 mph, depending on consistency and depth, making a clean wave off one side. If you have to push it straight, as you slow coincidentally raise the blade at the bottom of the pile to shove it up higher. Carry too much speed here and you'll stop with an unceremonious thud. Common mistakes cited among a few experts were people pushing banks of snow rather than plowing it, and rushing the shift between Drive and Reverse, throttling up before the shift is completed.

Submit your questions for Autoblog Podcast #321 LIVE!

We're set to record Autoblog Podcast #321 tonight, and you can drop us your questions and comments regarding the rest of the week's news via our Q&A module below. Subscribe to the Autoblog Podcast in iTunes if you haven't already done so, and if you want to take it all in live, tune in to our UStream (audio only) channel at 10:00 PM Eastern tonight.
Discussion Topics for Autoblog Podcast Episode #321
Unibody Ford Ranger replacement