2013 Drw Laramie Longhorn Mega 4x4 Navigation Sunroof Leather Heated Diesel on 2040-cars

Auto blog

2021 Ram 1500 TRX Suspension Deep Dive | Underbelly of the beast

I think we can all agree that we have been waiting for a gonzo full-size truck like the 2021 Ram 1500 TRX for a long time. After all, it has been over a decade since the Ford F-150 Raptor came out, and it was such an immediate hit that I expected its direct competitors to respond much sooner than this. We all knew something was finally brewing in 2016, when the TRX concept was unveiled at the Texas State Fair. I was there, and was among the many who gave the assembled Ram higher-ups an enthusiastic thumbs-up. That’s what they were hoping to see before they greenlit the project. The pace of development being what it is, and with the redesigned, current-generation Ram 1500 a prerequisite that understandably had to come first, itÂ’s no surprise that weÂ’re only seeing it now as a 2021 model. You may be biting your tongue that I overlooked the Tundra TRD Pro or the Chevrolet Silverado Trail Boss, but neither of those comes close to following the formula established by the Raptor: big engine, a much wider stance than the base truck, greatly enhanced suspension travel, huge tires and swollen fenders to cover it all. Only the Raptor and the TRX fit that mold. For now.   Before I got started, I first pointed the TRX up my RTI ramp and measured its Flex Index score. Please excuse the shaded nose; the truck ran farther up than IÂ’d guessed and literally drove out of the picture. But something in my subconscious warned me to keep the garage door open, which was fortuitous because the nose of the Ram ended up inside. The TRX hiked its front wheel 29 and 7/8 inches off the ground before the left rear tire reached the point of lift-off, and that equates to a climb of 87.4 inches up the deck of my ramp. Divide that by the TRXÂ’s wheelbase of 145.1 inches, multiply by 1,000, and you arrive at a Flex Index score of 602 points. It could have been a few points higher, I think, if I could have straightened out the steering a bit better. But the high-grip cheese grater surface of my ramp was firmly dug in and having none of it. This is an extremely good score for a full-size crew cab pickup. LetÂ’s take a closer look at what made that possible.   The track width of the TRXÂ’s double wishbone front-suspension is a full 6 inches broader than a regular Ram 1500, and you are looking at the parts that are responsible. The lower wishbone (yellow arrow), the upper control arm (green) and the steering knuckle (red) conspire to add 3 inches per side to the TRXÂ’s stance.

2014 Promaster looks like a Fiat, hauls like a Ram

A new day is dawning, folks. The old-guard vans of our youth are being replaced with a new flock of European-inspired commercial vehicles from the likes of Ford, Nissan (Renault) and Mercedes-Benz. Here in Chicago, Ram pulled the covers off its entry into the reborn commercial van market with the 2014 Promaster, based on the well-known European Fiat Ducato.
Ram makes no bones about the Promaster's Fiat underpinnings, though the company claims it has beefed up the machine for US roads and uses with a re-engineered chassis, a more robust suspension setup, improved brakes (from Brembo), additional corrosion protection, improved climate control and additional safety systems.
Power comes from one of two powerplants options, one gas and one diesel. First up is Chrysler's well-known 3.6-liter Pentastar V6 rated at 280 horsepower and 260 pound-feet of torque mated to a six-speed automatic transmission. For a bit more pulling power and durability, Ram is offering a new 3.0-liter four-cylinder diesel engine pumping out 174 hp and, more importantly, 295 lb-ft of torque at just 1,400 rpm. That engine sends its torquey goodness through a six-speed electronically controlled automated manual gearbox.

Dongfeng and PSA extend Chinese joint venture

BEIJING/PARIS — China's Dongfeng and Peugeot maker PSA are extending their business cooperation, despite the Chinese company reducing its stake in PSA to help smooth the French carmaker's merger with Fiat Chrysler Automobiles (FCA). Dongfeng said on Thursday it had agreed with PSA to extend the duration of their joint venture Dongfeng Peugeot Citroen Automobiles (DPCA). Under the deal, the venture could get the rights to PSA's new brands in China and will benefit from new technologies and intellectual properties, the Chinese company said. PSA was not immediately available for comment. The announcement comes a day after the companies said Dongfeng would reduce its 12.2% stake in PSA by selling 30.7 million shares to the French company. Analysts said the move could smooth U.S. regulatory approval for PSA's roughly $50 billion (GBP38.97 billion) merger with Italian-American carmaker FCA. The sale of Dongfeng's shares in PSA, worth around 680 million euros ($757 million), will leave the Chinese group holding around 4.5% of the merged PSA-FCA, which is set to become the world's fourth-biggest carmaker by sales volumes. "As the cooperation between Dongfeng and PSA deepens, we expect the joint venture to continue making good progress in China," a Dongfeng representative said. On a conference call, Dongfeng said DPCA would have exclusive rights to PSA's Opel cars should the partners agree to bring the brand to China, and enjoy lower prices on car parts imported from PSA. Earlier this year, a document seen by Reuters showed Dongfeng and PSA plan to cut jobs at Wuhan-based DPCA and reduce its number of car plants to try to make the venture more profitable. Chrysler Dodge Fiat Jeep RAM Citroen Peugeot China FCA PSA Dongfeng