2011 Ram 3500 4wd Mega Cab 160.5" Big Horn Low Miles Cummins Diesel on 2040-cars

Auto blog

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.

2020 Ram 1500 and heavy-duty trucks get Night and Black Edition packages

Ram traveled to the Texas State Fair to introduce a pair of pickups you might not be able to see in the dark. The murdered-out trucks are called Black Edition and Night Edition, respectively. The Black Edition is based on the range-topping Limited variant of the 2020 Ram 1500. It receives -- you guessed it -- a wide panoply of black accents on the grille, tow hooks, bumpers, door handles, and door mirrors. Ram also added black 22-inch alloy wheels and a tonneau cover. The Limited is only offered with a 5-foot-7 cargo box and four doors, but Black Edition buyers can choose two- or four-wheel drive. Engine options include the base gasoline-burning 3.6-liter V6, 3.0-liter EcoDiesel V6, and the mighty 5.7-liter Hemi V8. Rest assured if you plan to work on your own truck, none of the engines receive a coat of black paint, so you'll be able to see what you're doing.  Note that the 2019 Ram 1500 Big Horn and Laramie trim levels is already available with a Black Appearance package, which we reviewed this year. Effectively, the Black Edition extends that darkened courtesy to the range-topping Limited.  The Night Edition package is for the Heavy Duty line of trucks, but it looks a lot like the aforementioned Black Edition trim. It adds a black grille with a body-colored frame, black emblems, and black bezels around the lights, and black wheels. Single-axle trucks get 20-inch wheels, while dually models ride on 17-inch alloys with machined pockets.  The Night Edition package is available on the Big Horn and Laramie variants of the 2500 and 3500 models. Ram noted it can only be paired with a Crew Cab or a Mega Cab. Engine options include the 6.4-liter Hemi V8 and the 6.7-liter Cummins straight-six turbodiesel with 1,000 pound-feet of torque. FCA says the Ram 1500 Limited Black Edition will be reaching dealers late third quarter 2019, which would be any day now. Buyers who want the Heavy Duty-based model will need to wait until "later fourth quarter." The Black Edition starts at $55,385, including destination, a figure that represents a modest $75 premium over the more colorful model. The Night Edition model carries a base price of $39,690, including destination. Pricing for the standard 2020 Heavy Duty hasn't been announced yet, so we don't know how much the package adds to the truck's bottom line.

2019-20 Ram 2500 and 3500 trucks recalled for bed step that can fail

It hasn't even been a full month since Chrysler issued a recall for 425,588 Ram 1500s, 1500 Classics, and Jeep Compass vehicles due to faulty windshield wipers, yet Ram trucks are already back in the recall news roll. This time, Chrysler has recalled 2019-2020 Ram 2500 and Ram 3500 pickups that have an accessory bed step. NHTSA campaign No. 20V207000, published April 9, 2020, states that, "In certain side loading conditions, the bed step may unexpectedly fail while in use." More specifically, recall documents reveal that certain pressure could crack the the mounting bracket that holds the step in place. This potentially could cause injury.  In total, the recall affects 37,580 vehicles, and the report estimates 100% of those vehicles have the defect. Of the more than 35,000 affected, 25,822 of those are 2019-2020 Ram 2500 pickups, and 11,758 are Ram 3500 pickups.  To remedy the situation, Chrysler will replace all affected bed step support braces for free. Chrysler says it expects the recall to begin May 29, 2020.      Recalls RAM Truck RAM 2500 Ram 3500