Lifted Ranch Hand Rhino-lined Two Tone Flares Mb Wheels Uconnect Remote Start on 2040-cars

Auto blog

Ram heavy-duty trucks look more conservative than new Ram 1500

We've had a pretty good peek at the 2019 Ram 1500 thanks to spy shots and renderings. (UPDATED January 2018: Here's the full reveal from the Detroit Auto Show.) And from what we've seen of it, it's a major departure from Rams of the past. We haven't seen as much of the Ram heavy-duty line, but these spy shots caught one out on the town, and it appears the Ram 2500 and 3500 will have a less controversial design. The big-rig tall grille is still the truck's focal point, but the design is a familiar one, featuring the same look featured on the current Ram's luxurious range-topping trims like the Ram Laramie Longhorn. We'll have to wait to see if the new heavy-duty trucks will continue to use this grille solely for range-topping trims and if the 1500's new look will venture up to its big brothers, and therefore banish the crosshairs for good. Regardless of the grille design, the headlights still sit fairly low next to it. That emphasizes the semi-truck design since the tops of the fenders are lower than the top of the hood, which cascades to meet said fenders. The headlights also look potentially carry-over. Really, there are so many similarities it leads us to believe the new heavy duty might be more of a refresh than a completely new design. Another interesting thing to note is that this Ram appears to use a similar drivetrain and suspension to the current heavy-duty trucks. Like the vast majority of trucks, it has a solid rear axle, but probably with coil springs as Ram currently does. Up front, though, it seems the solid front axle has also been retained. This should be good news for fans of the off-road-ready Power Wagon. We're probably still a ways away from seeing the heavy-duty Rams. Last year, we learned a rumor that the heavy-duty trucks were delayed for an unspecified amount of time. We wouldn't expect to see anything official about the truck until at least 2019, about a year after we expect to see the 2019 Ram 1500 revealed. Related Video: Featured Gallery Ram Heavy Duty spy shots View 16 Photos Image Credit: KGP Photography Spy Photos RAM Truck

2016 Ram 3500 Heavy Duty now offers 900 lb-ft of torque

After last year's bump to a massive 865 lb-ft of torque for its 2015 3500 Heavy Duty pickup, Ram certainly isn't taking a rest. The model already offers the best towing capacity and most torque in its class, but both figures are growing even higher for the 2016 model year. Now, customers that really need some grunt can order the Cummins 6.7-liter inline-six diesel in the 3500 with a staggering 900 pound-feet of torque and 385 horsepower. Ram claims that this huge figure is the most torque ever available in a mass production vehicle, and it tops the 2015 model by a healthy 35 lb-ft. The added grunt comes thanks to adjustments to the fuel delivery and the turbo's boost, and to better handle things, the rear axle gear now is held with 16 bolts, rather than 12. The tweaks also push the tow rating to an SAE J2807-certified 31,210 pounds, which is absolutely monumental. While not available with the 900 lb-ft version of the Cummins, the Ram 2500 also sees a tiny boost in its max tow rating. The trucks are now capable of hauling up to 17,980 lbs, versus 17,970 lbs last year. The 2016 Ram Heavy Duty trucks go into production in the third quarter and should start arriving at dealers during the fourth quarter of 2015. Prices for the 3500 start at $33,185 and $32,680 for the 2500, after the $1,195 destination charged, respectively. The company hasn't yet announced the cost for the 3500 with the 900 lb-ft Cummins diesel. 2016 Ram Heavy Duty Widens its Leadership Gap With a Triple-decker Presence: Best-in-class Power, Towing Capacity and Payload Capacity • 2016 Cummins 6.7-liter calibration hits a best-in-class 900 lb.-ft. of torque. The most torque ever offered in a mass-production vehicle • 2016 Ram 3500 crushes the competition with up to 31,210 pounds of SAE J2807-spec.

NHTSA investigating power modules on Chrysler Group SUVs and minivans

The Center for Auto Safety is officially petitioning the National Highway Traffic Safety Administration to begin scrutinizing alleged problems with the totally integrated power module (TIPM) on about 24 Chrysler Group SUVs and minivans. The advocacy group claims that the part's failure can cause affected vehicles to stall or not start at all. NHTSA is still looking into the accusations and deciding whether a full investigation is actually warranted.
The CAS petition claims at least 70 TIPM failures, but according to NHTSA, six of the complaints are for models that don't have the modules. In 34 of the reported cases, the vehicles refused to start, and in 17 of them the engine stalled. There were also two allegations of smoke and one of a fire. However, none of these affected airbag deployment or resulted in a crash.
This petition isn't the first TIPM-related problem for Chrysler Group. A recent report in the New York Times alleged that it found 240 complaints potentially related to the issue on NHTSA's website alone. In September, the automaker also recalled 230,760 examples worldwide (188,723 in the US) of the 2011 Jeep Grand Cherokee and Dodge Durango replace the fuel pump relay circuit inside of the TIPM-7 with one external to the unit. The original part could allegedly cause the models to stall without warning. Even earlier, the company also recalled about 80,000 examples of the Jeep Wrangler and Dodge Nitro in 2007 to have the module reprogrammed.