Dodge Ram Mega Cab Laramie 4x4 Cummins Diesel Custom New Lift Wheels Tires Nav on 2040-cars

Auto blog

2019 Ram 1500 finally revealed | All new, from headlights to hybrid system

Few categories are as hotly contested as the full-size truck segment. The passion from both automakers and loyal truck owners is fierce. See any number of Calvin window decals for example. Well, a new Ram 1500 is finally here, and it's lighter, stronger and better equipped than ever before to take on the Ford F-150 and the Chevy Silverado. In addition to new styling and a hugely versatile interior, both the V6 and V8 Ram 1500 are available with a 48-volt mild-hybrid system. Despite looking similar to the current Ram, this isn't merely an update. The truck is all new inside and out, improving on what worked and fixing what was aging. Overall weight is down 225 pounds, with 120 of those coming from the chassis and frame. And 98 percent of the frame is made from high-strength steel, with aluminum making up a small amount in parts like the transmission crossmember and engine mounts. The Ram 1500 also gets an aluminum hood and tailgate. The weight may be down, but the 2019 Ram 1500 is longer and wider than before. The bed height, too, has increased. Visually, it's difficult to notice the increased size. The overall design is an evolution of what Ram has offered for decades. The most obvious change is the lack of a crosshair grille, a staple since 1994. The new "RAM" grille started as an option but now carries over to every single model. It's not going to be popular with everyone, but we're sure Mopar or some other parts supplier can fill your t-shaped void. The drop fender that also debuted on the '94 Ram has been lifted, giving the front a far more upright face. There are two different headlight designs, depending on the trim and options. The top-tier LED units are wide and slim, while the standard lighting looks similar to what we have now. The front bumper can be chrome or paint, while the chrome accents carry around to parts like the new 1500 badge on the hood. Tow hooks are lower and further apart than before, while the parking sensors have been better integrated into the design. Like the headlights, the taillights are an evolution of the current shape. Both halogen and LED units are available. The full-width steel rear bumper can be had in either chrome or body color. As for paint, there are 12 colors in total, with three two-tone variants. If that's not enough variety, there are 16 new (six-lug!) wheel designs to choose from, ranging from 18 to 22 inches. View 160 Photos Inside, the 2019 Ram 1500 is more refined and practical than ever before.

Ford, Stellantis workers join those at GM in ratifying contract that ended UAW strikes

DETROIT — The United Auto Workers union overwhelmingly ratified new contracts with Ford and Stellantis, that along with a similar deal with General Motors will raise pay across the industry, force automakers to absorb higher costs and help reshape the auto business as it shifts away from gasoline-fueled vehicles. Workers at Stellantis, the maker of Jeep, Dodge and Ram vehicles, voted 68.8% in favor of the deal. Their approval brought to a close a contentious labor dispute that included name-calling and a series of punishing strikes that imposed high costs on the companies and led to significant gains in pay and benefits for UAW workers. The deal at Stellantis passed by a roughly 10,000 vote margin, with ballot counts ending Saturday afternoon. Workers at Ford voted 69.3% in favor of the pact, which passed with nearly a 15,000-vote margin in balloting that ended early Saturday. Earlier this week, GM workers narrowly approved a similar contract. The agreements, which run through April 2028, will end contentious talks that began last summer and led to six-week-long strikes at all three automakers. Shawn Fain, the pugnacious new UAW leader, had branded the companies enemies of the UAW who were led by overpaid CEOs, declaring the days of union cooperation with the automakers were over. After summerlong negotiations failed to produce a deal, Fain kicked off strikes on Sept. 15 at one assembly plant at each company. The union later extended the strike to parts warehouses and other factories to try to intensify pressure on the automakers until tentative agreements were reached late in October. The new contract agreements were widely seen as a victory for the UAW. The companies agreed to dramatically raise pay for top-scale assembly plant workers, with increases and cost-of-living adjustments that would translate into 33% wage gains. Top assembly plant workers are to receive immediate 11% raises and will earn roughly $42 an hour when the contracts expire in April of 2028. Under the agreements, the automakers also ended many of the multiple tiers of wages they had used to pay different workers. They also agreed in principle to bring new electric-vehicle battery plants into the national union contract. This provision will give the UAW an opportunity to unionize the EV battery plants plants, which will represent a rising share of industry jobs in the years ahead.

Ram granted patent for in-bed ramp system

Most of the patent filings we report on these days are of a pretty high-tech nature: everything from "humanized" navigation systems to 11-speed transmissions. But cool innovations can be lower-tech and clever, too. At least that's our feeling after seeing some proposed plans from Ram. FCA has filed a patent for a system of built-in ramps recessed inside of a truck bed. While stowable ramps aren't new – Ford offers a similar system for the F-150 ­– the level of integration shown in these diagrams seems to be. Drawings show ramps that run on channels in the bed and tailgate, hinged at the end of the extended gate for a gentle upslope into the cargo area. What's more, the system seems changeable, with two ramps set wide or narrow, or just one centrally mounted. Just the thing for switching from motorcycle-loading season to snowmobile-loading season. A granted patent doesn't always lead to a product brought to market, of course. Issues with cost, durability, and demand all have a lot to say about what makes it from design to showroom. Still, we think the proposed RamRamp (feel free to use that, FCA) shows a ton of promise. Speak up truck owners, is a factory-installed ramp system like the one you see here something you'd pay for on your next vehicle? Get into Comments, below, and let us know. Related Video: Featured Gallery Ram in-bed ramps patent drawings News Source: USPTO via Allpar RAM Truck patent