Bran New Sleek Black 2012 Ram 2500 Laramie 4x4 Mega Cab Turbo Diesel Pick Up on 2040-cars

Auto blog

2019 Ram 1500 prototype gives us better glimpse of grille

Though we've managed to see most of the 2019 Ram 1500 from previous spy shots, we're still discovering new details here and there in spy photos. The latest batch shown above feature a truck with camouflage that covers most of the body, but curiously leaves the grille practically bare. The grille appears to be a version of what we saw on the nearly uncovered example from a few months ago. This time, that central bar is uncovered. In some ways, it looks like a sleeker version of the grille found on current Laramie Rams; the holes on either side of the emblem area are slimmed way down, and fit a single line. We can also see that those holes line up with the turn signal/daytime running light elements in the headlights. If you're not a fan of this new grille, the good news is that there will probably be a variety of different designs available, just as there are on current Rams. There aren't many other details to glean from this prototype, though. It appears to be the longer of the four-door models and has an impressive amount of glass area. The tailgate is fully covered, so we can't tell if this has a conventional drop-down gate or the split version we've seen on another prototype. We should know much more in about a month when the Ram 1500 is expected to appear at the 2018 Detroit Auto Show. For more about the Ram including renderings of the final truck, check out our post on what we know so far. Related Video:

Ram recalling 65k trucks for rear-axle heat treating

A problem with the rear axle has promoted Fiat Chrysler Automobiles to recall a selection of Ram trucks. The campaign affects 2015-16 Ram 1500 series trucks – specifically those manufactured between June 17 and September 28, 2015. All told, that amounts to over 65,760 units across the United States. The issue stems, according to the statements below, from the rear axle shaft. Some of those trucks may have not had those axle shafts properly heat-treated, which could cause them to fracture and separate from the wheel. And that, it should go without saying, could lead to a crash. FCA states that most of the vehicles in question are in dealer hands, but while the manufacturer says it is aware of one accident to have resulted from the issue, no injuries have been reported. The owners of the affected vehicles will be notified to bring their trucks in to their local dealership to have them inspected. If necessary, the dealership with replace the rear axle assembly. This recall follows three prior (but unrelated) ones, also issued for Ram pickups, that between them affected well over a million units. Related Video: RECALL Subject : Incorrectly Heat Treated Rear Axle Shaft Report Receipt Date: OCT 15, 2015 NHTSA Campaign Number: 15V661000 Component(s): POWER TRAIN Potential Number of Units Affected: 65,760 Manufacturer: Chrysler (FCA US LLC) SUMMARY: Chrysler (FCA US LLC) is recalling certain model year 2015-2016 Ram 1500 trucks manufactured June 17, 2015, to September 28, 2015. The affected vehicles may have been built with rear axles that were incorrectly heat treated. CONSEQUENCE: If the rear axle shaft was not properly heated treated, it may fracture and a wheel separation could occur, increasing the risk of a crash. REMEDY: Chrysler will notify owners, and dealers will inspect the vehicles and replace the axle assemblies, as necessary, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R59. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. ### Statement: Heat-treating October 27, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 65,760 U.S.-market trucks – most of which are in dealer hands – to inspect and replace, as required, their rear axle shafts or rear axles.

2019 Ram Heavy Duty will have more than 170 available Mopar parts

When it comes to factory-backed modifications, few do it better than FCA's Mopar division. Just look at all the gear that's ready at launch for the new 2020 Jeep Gladiator pickup. In the past month or so, we've seen the debut of the Ram 2500 Heavy Duty and 3500, 4500 and 5500 chassis cab models. At the tail end of the 2019 Chicago Auto Show, FCA revealed a whole host of Mopar parts for the heavy-duty Rams. The display truck is a 2019 Ram 2500 Heavy Duty Big Horn with the 6.4-liter Hemi done up in FCA's Blue Streak paint. Most of the parts are going to be ready at launch, though Mopar says some are just concepts at this point. Actual parts include a black powder-coated "Ram Bar" in the bed fitted with five 5-inch LED lights. The lights are triggered by a switch box in the cab. Other Mopar parts on the truck include a bed step and fender flares as well as interior bits like rubber floor mats and stainless steel door handles. The truck is also fitted with a number of parts that aren't actually available. That includes the 17-inch beadlock wheels fitted with Goodyear tires. There are also rock rails and a bed-mounted spare that's good for up to 37-inch tires. Outside of the truck, Mopar will have a number of parts available at the 2500's launch. Customers can get a trailer camera, fifth-wheel hitch, gooseneck ball kit, bed extender, bed liner, a cargo ramp, toolboxes and more. Related Video: