2024 Ram 2500 Tradesman on 2040-cars

Auto blog

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

Stellantis announces ‘Circular Economy’ business to drive revenue, decarbonization

Stellantis has already announced its plans to reach net-zero carbon emissions by 2038. Today, the automaker has announced a new business unit to help it reach that goal while generating 2 billion euros per year in revenue by 2030. The “Circular Economy” business will help make revenue less dependent on finite, rare and ecologically problematic materials. The Circular Economy model features what Stellantis calls a “4R” strategy, comprising remanufacturing, repair, reuse and recycling. The goal is to make materials last as long as they can, reducing reliance on the acquisition of those precious new materials in the future by returning them to the business loop when theyÂ’ve reached the end of their first life. Through these processes, Stellantis says it can save up to 80% raw material and 50% energy compared to manufacturing a new part. Remanufacturing, or “reman” in Stellantis shorthand, means dismantling, cleaning and rebuilding parts to OEM spec. Nearly 12,000 remanufactured parts are available for customers to purchase. Some remanufacturing is done in-house, and some with partners and through joint ventures. Repair is pretty obvious — fixing parts to put back into vehicles. This also consists of reconditioning, to make a vehicle feel like new. Stellantis boasts 21 “e-repair” centers for repairing electric vehicle batteries.  Reuse refers to parts still in good condition from end-of-life vehicles sold as-is. Stellantis says it has 4.5 million multi-brand parts in inventory. These are sold in 155 countries through the B-Parts e-commerce platform. Reuse also refers second-life options, such as using batteries outside of automotive purposes. Recycling involves dismantling parts and scraps back into raw material form that is then looped back into the manufacturing process. Stellantis says it has collected 1 million parts for recycling in the past six months. Recycling doesnÂ’t get counted in that aforementioned 2 billion euros of revenue, but it does save the company money on acquisition of raw materials. As for batteries, specifically, Stellantis expects this recycling business to ramp up after 2030, when the packs currently in service begin to reach the end of their lifecycle. Stellantis will use its new “SUSTAINera” label to denote parts that are offered as part of its Circular Economy business.

2019 Ram Heavy Duty gets new face, 1,000 lb-ft Cummins and the towing crown

We've seen uncovered images before in spy shots, but here are the official images and word on the 2019 Ram Heavy Duty pickups. Ram dropped so much verbiage on new features that we'd need the truck's 7,680-pound max payload rating to haul the press releases, so dig in. We'll start with that max payload rating, and the 35,100-pound tow rating. Gimlet-eyed truck watchers will note the Ram HD's max tow rating is exactly 100 pounds more than that available on a Ford Super Duty, meaning the Auburn Hills clan takes the "best-in-class" mantle for a few months. The other big number: 1,000 pound-feet of torque from the high-output version of the 6.7-liter Cummins inline-six turbodiesel, a 70-lb-ft increase over the 2018 Ram 3500 HD. Completing the specs at the top, that HO motor produces all that torque at 1,800 rpm, and makes 400 horsepower at 2,800 rpm. One step down, the standard-output 6.7-liter Cummins puts out 370 hp and 850 lb-ft. Thanks to developments like a compacted graphite iron block, lighter pistons, hollow camshaft, and new forged connecting rods and bearings, the Cummins engine has lost more than 60 pounds. The entry-level motor is a 6.4-liter Hemi gas-powered V8 with an unchanged 410 hp and 429 lb-ft. 2019 Ram Heavy Duty View 12 Photos The HO Cummins pairs to an Aisin AS69RC six-speed transmission, with upgraded hardware and programming for better shifting and oversight of the gravity-warping torque. The regular Cummins mates to a "significantly upgraded " version of the in-house 68RFE six-speed automatic. The 6.4-liter Hemi works with the well-known TorqueFlite 8HP75 eight-speed automatic, bolstered for heavy duty obligations, the first time the eight-speed makes an appearance in a Ram HD. A column-mounted shifter works the gearsets on the Cummins-equipped rigs, a rotary dial on the center stack controls the shift-by-wire eight-speed. The Cummins motors come with two 220-amp alternators. The Hemi V8 gets a 220-amp and a 160-amp alternator, which Ram says is the "first gas-driven application of its kind in either class." There will be six trims available: Tradesman, Bighorn/Lonestar, Power Wagon, Laramie, Laramie Longhorn, and Limited. The HD trucks don't share any exterior sheetmetal with the light-duty 1500, and each trim is known by different grilles, bumpers and wheels.