2015 Ram 2500 Laramie on 2040-cars

Auto blog

FCA recalls 2 million Ram trucks over airbag issues

Airbag issues have prompted Fiat Chrysler Automobiles to issue another pair of recalls. The two separate issues both affect Ram pickups, one campaign stemming from oversensitive sensors, the other from a wiring harness. Between them, the problems affect an estimated combined total of some 2 million units. The first recall affects 2013-15 Ram 1500, 2500, and 3500 trucks, specifically four-door models, manufactured between June 20, 2012, and January 26, 2015. The calibration of the side impact sensor in those affected units may to be too sensitive. As a result, if the door is slammed too hard, the side-curtain airbag and seatbelt pre-tensioner may inadvertently activate. FCA reports that this issue affects an estimated 667,406 units in the United States, plus 153,011 in Canada, a further 8,272 in Mexico, and another 14,847 in markets outside of North America, amounting (in Chrysler's estimation) to less than 0.005 percent of those vehicles produced. The automaker says it is aware of two minor injuries (but no accidents) that may have resulted from the glitch, and is taking action to have the Occupant Restraint Control module recalibrated in the affected units. The second issue also affects Ram pickups, including 1500, 2500, 3500, 4500, and 5500-series models from the 2012 to 2014 model years, built between January 18, 2011, and October 7, 2014, and fitted with the optional Electronic Vehicle Information Center. The problem here stems from a wiring harness in the steering wheel that may rub against a retainer spring in the air bag control module, which in turn could cause an electrical short and deploy the driver's side air bag unexpectedly. In the United States alone, the issue is estimated to affect 1,060,531 units, which will need to be inspected and, where necessary, have their steering wheel wiring harnesses secured, with protective caps added to the ends of the airbag retainer spring. These do not represent the first issues we've seen from Fiat Chrysler in recent days. The automaker recently issued a recall for approximately 1.4 million vehicles to have their Uconnect software updated to prevent hacking. A few days ago it also announced a recall for 350,000 Dodge Journey (and Fiat Freemont) crossovers to secure loose engine covers. And the National Highway Traffic Safety Administration is expected to issue Fiat Chrysler Automobiles a $105-million fine for mishandling other recent recalls and safety issues.

FCA CEO says the Ram 1500 Classic will live on, might even get an update

Ram intends to keep selling the 1500 Classic pickup truck for an unknown amount of time. According to a report from Motor Trend, FCA CEO Mike Manley during the company’s second-quarter earnings call said there are no plans to discontinue the old truck. Not only this, but Manley also suggested that Ram could give the Classic an update. In case you werenÂ’t familiar with RamÂ’s strategy of selling the 1500 Classic alongside the regular 1500, weÂ’ll lay it out for you: Ram released a completely new 1500 for the 2019 model year. Instead of discontinuing the truck it was selling before the new model, Ram continues to produce it under the 2019 Ram 1500 Classic name. Despite it being a 2019 model year truck, the Classic is the last-generation Ram. This is done so that Ram can offer customers a full-size truck option than is cheaper than the fancy new truck is capable of dipping down to. The 2019 Ram 1500 Classic starts at $29,340, whereas the regular 1500 has a base price of $35,135. If that makes a difference for enough people, then it makes financial sense for the old truck to stick around. However, Ram appears to be considering giving the old truck some new tricks, according to Manley. If that idea comes to fruition, then the Classic will start to look like an even better value proposition than it is today. Ram would have to act quickly, though, as the old truck just accelerates its aging by the day as each new pickup hits the market. Sales of the Classic were certainly an important contributor in the battle with Chevy to takeover the number two spot in the pickup wars. An even more attractive offering for the same low price sounds like a short-term winner to us. If Ram does refresh the 1500 Classic for 2020, donÂ’t expect it to last much longer beyond that model year, though. ItÂ’s already on life support at this point, and the new 1500 feels years ahead of it in every way.

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper. For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011. The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors. While the adoption of SAE J2807 will be helpful for light-duty customers, those interested in bigger trucks will still be left with differing standards. There is no sign of the new tow standards being adopted for the heavy-duty market.