2014 Ram 2500 Tradesman on 2040-cars

Auto blog

Marchionne: Midsize pickup still not in the cards; Ram 1500, Jeep Wrangler could use aluminum

During the Fiat-Chrysler briefings on Tuesday, Reid Bigland, head of Ram Trucks, outlined the new product plans for his brand, including confirmation that an all-new light-duty Ram 1500 will launch in 2017. From there, discussions spun off in two directions, with the main questions being: will Ram build a midsize pickup? And, following Ford's move to extensively use aluminum in its new 2015 F-150, will Chrysler be using this weight-saving material for the next round of its fullsize truck, as well?
"I think there is room for a Ram 1000," Fiat-Chrysler CEO Sergio Marchionne (pictured above) told members of the media, saying this is a conversation the automaker has been having internally for several years now. "We've tried this ... we've actually taken it to clinics," Marchionne stated, adding that the "response has been lukewarm."
"I have better use of aluminum in this house than a pickup truck." - Sergio Marchionne

2020 Ram 1500's new EcoDiesel horsepower and torque revealed

Following on the reveals of Ford and GM's light-duty diesel full-size pickup truck engines, Ram has finally revealed its second-generation EcoDiesel V6 for the 2020 Ram 1500 and 2019 Ram 1500 Classic. The engine is once again a 3.0-liter V6, but it now makes 260 horsepower and 480 pound-feet of torque. That's an increase of 20 horsepower and 60 pound-feet of torque over the previous engine. Ram notes a number of changes were made to achieve these numbers, including adding a water-cooled variable geometry turbo, reducing compression ratio from 16.5:1 to 16:1, adding lighter pistons, revising the intake ports, and using a new fuel injection system and exhaust gas recirculation system. Those numbers also put the new Ram diesel at the top of its class for torque. Just behind it is the 3.0-liter inline-six in the 2020 Chevy Silverado and GMC Sierra that makes a bit more power at 277 horsepower but less torque at 460 pound-feet. Then there's the 2019 Ford F-150's 3.0-liter V6 that makes 250 horsepower and 440 pound-feet of torque. The Ram engine also hits peak torque at 1,600 rpm, which is sooner than the Ford engine at 1,750 rpm. The Chevy engine's torque arrives even earlier than both at 1,500 rpm. The Ram's maximum towing capacity of 12,560 pounds also tops the F-150 diesel's 11,400 pounds. There are still a number of unknowns regarding the new EcoDiesel engine, though. Ram hasn't announced payload capacity, pricing or fuel economy for the engine. We expect fuel economy will be slightly improved over its predecessor's 20 mpg in the city and 27 on the highway. But we don't know if it will match or surpass the F-150 diesel's 22 mpg in the city and 30 on the highway. All these numbers should be announced closer to the engine's release window of fourth quarter of 2019. The engine will also be available in every single trim and configuration of the 2020 Ram 1500 including the Rebel, which used to be a gas-only trim. The engine will even be available on the 2019 Ram 1500 Classic. This should also be the engine that will soon appear in the Jeep Gladiator and Wrangler.

Ram introduces 5th and final 'Built to Serve' edition

Ram introduced the fifth and final variant of its "Built to Serve" pickup series Tuesday. Finished in Spitfire (orange) or Bright White, this final version honors the Coast Guard.  "We owe a huge debt of gratitude to our armed forces and the brave men and women who serve them. These 'Built to Serve' models are just one way we honor those who have selflessly served our country," said Mike Koval Jr., Ram Brand Chief Executive Officer – Stellantis. "Whether civilian or military, Ram truck owners are very familiar with this adage as itÂ’s something we strive to build into every truck and van we produce." The trucks were originally slated to roll out in increments between Veterans Day 2019 and 2020, but it appears the release cadence may have been interrupted slightly by the many calamities of the past year. Each of the five comes in one of two special colors chosen to "evoke the spirit, the mission and history of that service," and a limited build number. These are the final of 10,000 (1,000 more than Ram initially planned) "Built to Serve" editions divvied up so that each branch gets two appropriate color choices out of 10 total: Gator (1,000 units) and Diamond Black (1,000); Ceramic Gray (1,000) and Patriot Blue (1,000); Anvil (1,250) and Billet Silver (1,500); Tank (1,000) and Flame Red (1,000); and Spitfire (500) and Bright White (750).  Available on every body style and powertrain, a Built to Serve package costs $2,795. Every truck comes with the 4x4 Off-Road Group, which bundles features like all-terrain tires, an electronic-locking rear axle, hill descent control, tow hooks, and four thick skid plates. They're easy to spot thanks to their prominent rear quarter panel decals. Cosmetic upgrades include an all-black grille and surround, black badges, side steps, black four-inch exhaust tips, body-colored wheel arch trim, and 20-inch wheels finished in Technical Gray.  Ram has used the series to help bring more attention to a volunteer initiative the automaker has run since 2015, not-coincidentally called Built to Serve.  Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.