2014 Ram 2500 Slt on 2040-cars

Auto blog

Ram pickups to keep it steel through 2020

One of the hottest topics in the industry these days is automakers' expanding use of aluminum, especially for vehicle bodies and platforms. While the lightweight metal has historically been the preserve of premium brands and sports cars, Ford shocked the industry when it announced that its 2015 F-150 would go aluminum-intensive for its new generation. As it turns out, the material change doesn't even mean a big jump in the prices for most of its trims. Possibly in reaction to the big change, General Motors is said to be using the lightweight metal in its next-gen trucks, too. That only leaves Ram as an open question among the domestics, and at least for now, the company is apparently in no hurry to push tin.
According to Reuters speaking with two, unnamed insiders, the Ram 1500 isn't getting an aluminum infusion until sometime after 2020. That's not to say the truck is going to be stagnant for the next half-decade or more, of course. According to Ram's five-year plan, there's a refresh for the 1500 coming in 2015 and much bigger changes on the way in 2017. Those same sources tell Reuters that further revisions aren't expected until at least 2021, which is when the aluminum could be added.
Fiat Chrysler Automobiles CEO Sergio Marchionne hasn't minced words about his thoughts on using the lightweight metal in pickups. "I have better use of aluminum in this house than a pickup truck," he said in May. Having said that, Marchionne was clear that if the material turns out to be revolutionary in the segment, the company would be willing to follow.

A beginner's guide to plowing snow with a heavy-duty truck

I live in a desert, so the only things getting plowed around here are mud flows and brewer neighbors. But I enjoy machinery and haven't plowed any snow since a "loaded" truck meant one with A/C and a CD player, so I jumped at the chance for a plow primer in a Ram HD on a Canadian airfield. Running a plow is like welding – the basics come quickly but experience pays dividends. The first thing to deal with is a frequently changing horizon because, stout as they are, even three-quarter-ton heavy-duty trucks will move up and down in front considerably with a 600-to-800-pound plow hanging off, and fast plow hydraulics rival some low-riders for bounce effect. Getting going is easy unless you forgot blocks and the plow froze to the ground, rookie. If you have to drive to your plowing assignment, blade height needs some experimentation to find the best cooling airflow; if you think sub-freezing temperatures negate that concern, remember you've installed what amounts to a 20-square-foot air brake up front that the truck has to overcome, and blowing snow could block some cooling air passages. Whether it's a "straight" blade or V design, always have it tilted to the right lest you catch a hidden post, solid mailbox, or edge of a snow bank. Most plow operators I spoke to rarely exceed 45 mph in transit because of cooling, front suspension travel, and common sense, and you should go even slower if you don't have some ballast like chains, extra fuel tanks, or a salt spreader to balance the load on the back. With trucks' relatively slow steering and all that weight up high, oversteer is best avoided. With a little clean space to get a run, stick it in Drive to gather momentum and lower the plow simultaneously to float, where the weight of the plow rests on and lets it run along the surface. Momentum is good until you hit something you didn't know about, at which point the plow's breakaway systems limit damage but your truck could still hit something big; caution never hurts. Start out at 10 to 15 mph, depending on consistency and depth, making a clean wave off one side. If you have to push it straight, as you slow coincidentally raise the blade at the bottom of the pile to shove it up higher. Carry too much speed here and you'll stop with an unceremonious thud. Common mistakes cited among a few experts were people pushing banks of snow rather than plowing it, and rushing the shift between Drive and Reverse, throttling up before the shift is completed.

Chrysler flooded with over 8,000 Ram 1500 EcoDiesel orders in 3 days

The diesel, half-ton pickup has long been a Holy Grail to many truck fans, largely because of its potential to achieve both high payload and great fuel economy. Strange, then, that auto companies have seemingly been slow to react. However, Chrysler is finally wading into the pool for the 2014 model year with a version of its Ram 1500 pickup, and early claimed returns are showing the advantage of being first on the market. The Auburn Hills automaker has just revealed that its initial allocation of 8,000 EcoDiesel trucks has been filled by dealers in just three days.
That flood of orders came from February 7-10, and that strong surge of interest apparently amounts to a new Ram record for the number of customer orders placed for a vehicle in such a short period of time. In fact, EcoDiesel models accounted for over half of Ram 1500 orders over that period, despite the fact that the diesel option costs several thousand dollars more than a comparable gasoline-engined model. That impressive total did not come entirely as a shock to Ram officials, however: "We knew customers have been asking for it," Nick Cappa, Ram Truck communications officer, tells Autoblog.
The 2014 Ram 1500 with its 3.0-liter EcoDiesel V6 and standard eight-speed TorqueFlight automatic makes 240 horsepower and 420 pound-feet - a combination good for 9,200 pounds of towing. Despite that pulling power, its fuel economy is rated at 28 miles per gallon highway (the best among trucks in its class), 20 mpg city and 23 mpg combined. Four-wheel drive variants gives up a single mpg in all categories.