2014 Ram 2500 Slt on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

2013 North American Car and Truck/Utility of the Year finalists announced [w/poll]

2012 is almost in the books and automakers are spending December gearing up for the 2013 auto show season, which tips off next month at the Detroit Auto Show. Traditionally, the latter opens up with the announcement of the North American Car and Truck/Utility of the Year awards, and this year figures to be no different.
But up until this moment, we didn't know which six vehicles would be parked ahead of the stage as finalists, with executives and engineers waiting for the winners to be disclosed. Whittled down from October's "short list" of nominees (11 cars and 10 truck/utility vehicles), the finalists are as follows:
2013 North American Car of the Year:

Some 2014-19 Ram ProMasters recalled for shifter cables that could detach

The National Highway Traffic Safety Administration (NHTSA) has issued a recall for hundreds of thousands of 2014-2019 Ram ProMaster vans with a 3.6-liter engine. Campaign No. 20V036000 states that the shifter cables on these vans could disconnect from the transmission, which could lead to a variety of unsafe situations. The new recall comes after Fiat Chrysler Automobiles (FCA) has issued transmission-related recalls for several other brand products in recent years. Jeep and FCA were thrust into the spotlight in 2016, when "Star Trek" actor Anton Yelchin's shocking death was linked to what was deemed an unintuitive shifter design. FCA recalled more than 1 million vehicles with a rocker-style eight-speed ZF shifter, including Jeep Grand Cherokees, Chrysler 300s, and Dodge Chargers. The design was unclear to some, and that confusion lead to dangerous rollaways. In 2017, FCA was back in the news when it announced a transmission recall for 1.8 million Ram trucks that had a faulty interlock that could result in the transmission shifting out of park. And in 2019, FCA announced two more transmission recalls, this time for 320,000 Dodge Darts and 51,788 Fiat 500s, both of which had cable bushings that could degrade due to temperature and moisture.  FCA's unsettling pattern has bled into the new decade, as 222,207 ProMasters have been recalled for an entirely separate transmission issue that could once again lead to a rollaway risk. The NHTSA estimates approximately three percent of these vehicles could have built with a transmission gear shift cable that was kinked during production. According to the recall document, "the vehicle population was determined to include all ProMaster vehicles equipped with a 3.6-liter engine from the beginning of 2014 MY production on April 23, 2013, through September 14, 2019, when the vehicle manufacturing process was revised." If the shift cable separates, the shifter is no longer connected to the transmission. The driver, then, would not be able to shift properly, or the transmission could be in a different position than believed. If the driver thinks the vehicle is parked, but it is actually still in drive or neutral, the vehicle could unintentionally move. As a precautionary measure until the vans are checked and fixed, FCA suggests owners use the parking brake when parking these vehicles. FCA will begin notifying owners on March 13, 2020 and plans to replace the damaged parts free of charge.