2014 Ram 2500 Diesel 4x4 Crew Cab 6 Speed Manual on 2040-cars

Auto blog

Over 1,000 Ram pickups lap Nurburgring in world record parade

How many Ram trucks would you think you'd see in one place anywhere outside the US? If you by any chance happened to be at the Nurburgring Nordschleife track in Germany the past weekend, you would have seen a great deal of them, as Ram enthusiasts grouped together to set a Guinness World Record. The record called for as many pick-up trucks as possible to form a parade, with the previous, Mexican-set record having consisted of 638 trucks; the earlier Ram-specific record featured 451 trucks. On November 5th, as many as 1,152 Ram trucks gathered at the 'Ring, and of course a lap of the Nordschleife track was the place for the actual parade. This video, which is more than a half-hour, shows the multitude of Rams slowly lapping the track, with flags waving in the cold November air. Honking horns was strictly prohibited, and the Rams did not off-road through the Adenauer Forst S-bend's grass. This is also one of the rare Nurburgring videos where no-one crashes into the railings at great speed. The parade was arranged by a vehicle trading company called AutoGlobalTrade, which originally aimed for 1,317 trucks to arrive at the Nurburgring, but the official number is still something to be proud of. The majority of the trucks were German, with some Rams having arrived from neighboring countries. Related Video: News Source: RamWorldRecord via PistonHeadsImage Credit: EMS Nordschleife TV Weird Car News Dodge RAM Truck Videos

FCA recalls 2 million Ram trucks over airbag issues

Airbag issues have prompted Fiat Chrysler Automobiles to issue another pair of recalls. The two separate issues both affect Ram pickups, one campaign stemming from oversensitive sensors, the other from a wiring harness. Between them, the problems affect an estimated combined total of some 2 million units. The first recall affects 2013-15 Ram 1500, 2500, and 3500 trucks, specifically four-door models, manufactured between June 20, 2012, and January 26, 2015. The calibration of the side impact sensor in those affected units may to be too sensitive. As a result, if the door is slammed too hard, the side-curtain airbag and seatbelt pre-tensioner may inadvertently activate. FCA reports that this issue affects an estimated 667,406 units in the United States, plus 153,011 in Canada, a further 8,272 in Mexico, and another 14,847 in markets outside of North America, amounting (in Chrysler's estimation) to less than 0.005 percent of those vehicles produced. The automaker says it is aware of two minor injuries (but no accidents) that may have resulted from the glitch, and is taking action to have the Occupant Restraint Control module recalibrated in the affected units. The second issue also affects Ram pickups, including 1500, 2500, 3500, 4500, and 5500-series models from the 2012 to 2014 model years, built between January 18, 2011, and October 7, 2014, and fitted with the optional Electronic Vehicle Information Center. The problem here stems from a wiring harness in the steering wheel that may rub against a retainer spring in the air bag control module, which in turn could cause an electrical short and deploy the driver's side air bag unexpectedly. In the United States alone, the issue is estimated to affect 1,060,531 units, which will need to be inspected and, where necessary, have their steering wheel wiring harnesses secured, with protective caps added to the ends of the airbag retainer spring. These do not represent the first issues we've seen from Fiat Chrysler in recent days. The automaker recently issued a recall for approximately 1.4 million vehicles to have their Uconnect software updated to prevent hacking. A few days ago it also announced a recall for 350,000 Dodge Journey (and Fiat Freemont) crossovers to secure loose engine covers. And the National Highway Traffic Safety Administration is expected to issue Fiat Chrysler Automobiles a $105-million fine for mishandling other recent recalls and safety issues.

A beginner's guide to plowing snow with a heavy-duty truck

I live in a desert, so the only things getting plowed around here are mud flows and brewer neighbors. But I enjoy machinery and haven't plowed any snow since a "loaded" truck meant one with A/C and a CD player, so I jumped at the chance for a plow primer in a Ram HD on a Canadian airfield. Running a plow is like welding – the basics come quickly but experience pays dividends. The first thing to deal with is a frequently changing horizon because, stout as they are, even three-quarter-ton heavy-duty trucks will move up and down in front considerably with a 600-to-800-pound plow hanging off, and fast plow hydraulics rival some low-riders for bounce effect. Getting going is easy unless you forgot blocks and the plow froze to the ground, rookie. If you have to drive to your plowing assignment, blade height needs some experimentation to find the best cooling airflow; if you think sub-freezing temperatures negate that concern, remember you've installed what amounts to a 20-square-foot air brake up front that the truck has to overcome, and blowing snow could block some cooling air passages. Whether it's a "straight" blade or V design, always have it tilted to the right lest you catch a hidden post, solid mailbox, or edge of a snow bank. Most plow operators I spoke to rarely exceed 45 mph in transit because of cooling, front suspension travel, and common sense, and you should go even slower if you don't have some ballast like chains, extra fuel tanks, or a salt spreader to balance the load on the back. With trucks' relatively slow steering and all that weight up high, oversteer is best avoided. With a little clean space to get a run, stick it in Drive to gather momentum and lower the plow simultaneously to float, where the weight of the plow rests on and lets it run along the surface. Momentum is good until you hit something you didn't know about, at which point the plow's breakaway systems limit damage but your truck could still hit something big; caution never hurts. Start out at 10 to 15 mph, depending on consistency and depth, making a clean wave off one side. If you have to push it straight, as you slow coincidentally raise the blade at the bottom of the pile to shove it up higher. Carry too much speed here and you'll stop with an unceremonious thud. Common mistakes cited among a few experts were people pushing banks of snow rather than plowing it, and rushing the shift between Drive and Reverse, throttling up before the shift is completed.