2014 Navigation Sunroof Leather Heated Cummins Diesel Lifetime Warranty on 2040-cars

Auto blog

Fiat Chrysler recalls 1.4M Ram pickups: Tailgates could open

Fiat Chrysler is recalling 1.4 million Ram pickup trucks equipped with a power locking tailgate that may malfunction and open unexpectedly. The recall affects certain Ram 1500, 2500 and 3500 trucks from 2015 through the 2017 model years equipped with 5-foot-7 and 6-foot-4 cargo beds. Trucks with 8-foot beds are excluded, as are those with manual-locking tailgates. FCA says the tailgate actuator limiter tab could break and cause the tailgate to unlatch and open while driving, spilling cargo into the road and causing an accident. The company says it is not aware of any injuries or accidents related to the problem, and it will notify customers when service becomes available, expected to start Sept. 14. It will repair the problem at dealerships free of charge. Most of the affected trucks — about 1.14 million — are in the U.S., but an estimated 260,315 were sold in Canada and nearly 45,000 will be subject to recalls in Mexico and outside the NAFTA region. Related Video:

Three Ram recalls affect more than a million pickups

Millions of Ram pickups across many of its model lines in the US are in need of recall repairs due to three campaigns by the truck maker. The largest of this trio covers 1.06 million examples in the US of the 2012-2014 Ram 1500, 2500, 3500, and chassis cab versions of the 3500, 4500, and 5500 because of potential inadvertent driver-side airbag deployment. In addition to those affected here, there are 235,925 in Canada, 26,543 in Mexico, and 23,635 elsewhere. There are also two related injures from this problem, but no reports of accidents, according to the company. While the recall was mysteriously ignored in the media at the time, the National Highway Traffic Safety Administration announced details of this campaign in late July. The next largest among the three covers 188,000 examples of the 2014 and 2015 Ram 1500 Quad Cab in the US because their side-curtain airbags don't fully overlap the C-pillars when deployed, which is in violation of federal rules. Conceivably, rear passengers not wearing their seatbelt could be more likely to be ejected in a crash. Ram's repair for the issue is still being developed, according to the National Highway Traffic Safety Administration, but the company advises all occupants to be buckled in. The final campaign affects 156,498 the company's heavy-duty trucks in the US, including the 2013 Ram 3500 and 2014 Ram 2500, 3500, and 3500 Chassis Cab. In addition, there are 20,603 in Canada and 3,241 elsewhere. Of the 13,236 in Mexico, a few units of the 2014 Ram 1500 exclusive to that market are also covered. The company found that the welds for some steering parts might have "insufficient fusion." If the part breaks, then vehicles are still controllable but with diminished response. There are no reported injuries but one minor accident. The fix involves installing a reinforcement bracket. Related Video: Statement: Steering-wheel Wiring Harness September 10, 2015 , Auburn Hills, Mich. - FCA US LLC is conducting a voluntary safety recall to inspect and service, as required, wiring harnesses in an estimated 1.06 million U.S.-market trucks. Investigation by FCA US discovered certain trucks may have steering-wheel wiring harnesses that wear because of contact with a spring. Such wear may cause a short-circuit that may lead to inadvertent driver-side air-bag deployment. The Company is aware of two related injuries, but no accidents.

FCA and UAW deal could mean huge production shakeups

The big labor contract between Fiat Chrysler Automobiles and the United Auto Workers is likely to lead to some very serious production shakeups across the company's North American manufacturing operations. That's according to a new report from Automotive News, which details the sweeping changes at no fewer than five production facilities in Michigan, Illinois, Ohio, Mexico, and Poland. So without further ado, here's what's going where, presented in easy to digest bullet form. Ram 1500 production would move from Warren, MI to Sterling Heights, MI Warren, MI would be retooled for unibody production and would handle the Jeep Grand Wagoneer and could potentially build Grand Cherokees to ease the strain on Detroit's Jefferson North factory Chrysler 200 production would move from Sterling Heights, MI to Toluca, Mexico Dodge Dart production would move from Belvidere, IL to Toluca, Mexic Fiat 500 production, which is currently handled by Toluca, would be concentrated in Poland, where the Euro-spec Cinquecento is built Jeep Cherokee production would move from Toledo, OH to Belvidere, IL to make room for Wrangler and Wrangler Pickup production Like we said, those are some big changes. But, as FCA CEO Sergio Marchionne said in an earlier interview with Automotive News, this kind of shakeup would make a lot of sense. In that August interview the exec said that automakers moved truck production to Mexico because they were "threatened" by the UAW. "The only thing [the UAW] want is to move the truck back. Which is right. If you move the truck back here, which is [the UAW's] domain, [and move] all the cars that we get killed on somewhere else, we could actually make sense of this bloody industry and actually increase the number of people employed in this country and really share wealth because we are making money," Marchionne told AN. News Source: Automotive News - sub. req.Image Credit: Bill Pugliano / Getty Images Plants/Manufacturing UAW/Unions Chrysler Dodge Fiat Jeep RAM Sergio Marchionne FCA toluca warren sterling heights