2013 Ram Laramie Longhorn on 2040-cars

Auto blog

Ram 2500/3500 Heavy Duty trucks rustle up more luxury with Rodeo Edition

Now there's an even more luxurious version of Ram's Heavy Duty 2500/3500 pickup called the Ram Rodeo Edition. This takes the already highly-appointed Laramie Longhorn heavy duty work truck and gives it even more features for the 2018 model year. On the outside you get body-colored bumpers and side-steps. For single-rear-wheel trucks you'll get 20-inch aluminum wheels, and dual-rear-wheel trucks will have 17-inch polished aluminum rims. The Longhorn name will stretch across the tailgate in a more subdued fashion than we thought it would have. A suede headliner is the main change over the base Longhorn on the inside. Functionality is where the your money really goes for the Ram Rodeo, because it'll come with the gooseneck trailer prep package and bed-view camera. In addition to that you'll get a rear air suspension to aid in load-leveling when hauling payload or a trailer. A set of skid plates and the Mopar bed step round out the Ram Rodeo Edition changes. You'll be able to get the Ram Rodeo with the crew cab or mega cab configurations. Both the 6.4-liter V8 and the 6.7-liter Cummins I6 diesel are fair game as well. A base 2500 Longhorn will run you $56,440 including destination, but the Ram Rodeo Edition starts at $62,485. The 3500 bumps that up to $72,955. Luxury trucks are not cheap. Ram says the Ram Rodeo Edition will be available in the third quarter of 2018, so essentially, they've arrived. Featured video:

NHTSA investigating over 600,000 Ram trucks due to stalling engine

More than 600,000 heavy-duty pickups built by Ram during the 2019 and 2020 model years are the target of a National Highway Traffic Safety Administration (NHTSA) investigation due to a faulty fuel pump. Only trucks powered by the 6.7-liter turbodiesel engine are affected. Documents posted on NHTSA's website explain that the agency's Office of Defects Investigation has received 22 complaints and two field reports claiming that the 6.7-liter turbodiesel straight-six either lost power or stalled completely while driving. The issue potentially affects 604,651 trucks, including the 2500, 3500, 4500, and 5500 variants of Ram's popular pickup. The 1500 model is not included. The agency notes that the high-pressure fuel pump is to blame; stalling occurs when the part fails. It adds that the issue mostly happens above 25 mph, and that the engine can't be started again after it turns off. Interestingly, while the investigation was announced in October 2021, Ram has been looking into it since November 2019. It asked dealers to "collect, monitor, and correct quality issues" on some trucks powered by the 6.7-liter Cummins. It has collected and inspected several pumps as a result of this campaign, according to NHTSA. As of writing, there have been no crashes, fires, injuries, or fatalities linked to the alleged defect. NHTSA officials explained they're looking into "the scope, frequency, root cause, and potential safety-related consequences" of the problem. If the issue is deemed a safety hazard, the agency could ask Ram to recall affected trucks and fix them. Ram said it's complying with investigators but provided no further details. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. 2019 RAM Heavy Duty | Everything You Need To Know About The New RAM Trucks

Current Ram 1500 sticking around into 2019

Ram is preparing a big redesign of its 1500 pickup truck for 2018, but for fans of the current truck, don't feel like you need to rush out to grab one – it's sticking around until 2019. That's according to Automotive News, whose sources spoke on condition of anonymity. The move allows Ram to take a two-prong approach to truck sales, offering the current model as a low-cost option for fleet users while pushing retail consumers toward the new pickup. The factories that build the 1500 today – Warren, MI, and Saltillo, Mexico – will assemble around 200,000 trucks in 2018 and 65,000 in 2019 before Ram phases out the older model. Meanwhile, FCA's Sterling Heights, MI, plant will screw together 325,000 redesigned 1500s starting in 2018, with production to increase to over 400,000 units in 2019. While Ram refused to comment when AN reached out, FCA CFO Richard Palmer hinted at the move during a conference call last week, saying "having more pickup capacity will allow us also to satisfy the fleet customers' demand on pickup, which we struggle to do today because we favor retail in the U.S. and Canadian volume, which have higher margins." "As we realign our capacity, we're going to be able to continue to work on improving our fleet mix," Palmer said. Beyond making a play for fleet buyers, continuing to build the current 1500 guarantees dealerships maintain a solid inventory as Ram ramps up production of the new truck. You can check out leaked images of the redesigned Ram here. According to Automotive News, the new truck won't use aluminum, like the Ford F-150, relying on steel instead. FCA's 3.6-liter V6 will provide thrust along with turbocharged options, although there's no mention of the venerable 5.7-liter Hemi V8. Don't read too much into that, of course – we'll eat our shoe if the 1500 ditches the popular eight-cylinder. It's still too early to predict when the 2019 Ram 1500 will debut, but it will likely happen in 2018 at the North American International Auto Show in Detroit or perhaps at a non-auto show event. Related Video: