2012 Tan Cloth Trailer Hitch Receiver Cummins Diesel We Finance 19k Miles on 2040-cars

Auto blog

Jeep Wrangler 4xe's hybrid powertrain: Could it be headed to other FCA products?

On its own, the 2021 Jeep Wrangler 4xe plug-in hybrid is a big deal for the brand and the model line. It's the most powerful and most efficient Wrangler by significant margins, and it doesn't give up the off-road capability that makes the Wrangler so special. But another great thing about this hybrid powertrain is its potential to be transplanted into other FCA vehicles. Just to recap, the layout of the Wrangler's hybrid powertrain, front to back, is as follows: engine, clutch, electric motor, clutch, transmission. The engine is the same 2.0-liter turbocharged four-cylinder that's a standalone engine for the Wrangler. The transmission and electric motor are sort of one unit, with the motor and clutch replacing the torque converter of the transmission. And the transmission itself is the ubiquitous eight-speed ZF automatic gearbox. Its transmission code name is 8HP75PH. The ZF eight-speed is available in every FCA product with a longitudinally-mounted engine and rear-wheel drive or four-wheel drive, with variations in the amount of power and torque it can handle. Not only that, but the Ram 1500 and 2500 and the Jeep Wrangler and Gladiator all have powertrains that utilize the non-hybrid version of the 8HP75 transmission specifically. Even the gear ratios for that transmission as well as the 8HP70 used in the Jeep Grand Cherokee, Dodge Durango, Dodge Charger and Chrysler 300 are nearly identical to those in the 8HP75PH. And a Fiat-Chrysler representative confirmed that the transmission portion of the hybrid drivetrain is basically carry-over from the regular 8HP75. So a transplant could be a relatively simple process. As for which of these models would be the most likely to receive the hybrid powertrain first, the Jeep Gladiator and Ram 1500 would seem like good bets, since they likely have the most similar transmissions, and the Gladiator in particular because of its closely-related underpinnings to the Wrangler. Both are also highly profitable trucks that sell well and could justify the development costs of adapting another powertrain. And in the case of the Ram, there's the impending F-150 hybrid to think about. Although Ram isn't going after a fully electric model, a PHEV could be a nice middle ground. A potential limiting factor would be whether the hybrid powertrain would be sufficiently robust to handle heavy payload and towing demands, particularly over longer periods.

2019 Ram HD Chassis Cab trucks: tough on the outside, comfy on the inside

The past year or so has been big for Ram. FCA's truck division went from having some of the most dated (though still solid) pickups on the market to introducing the 2019 Ram 1500, arguably the new segment leader. A year later, at the 2019 Detroit Auto Show, FCA revealed the new Ram Heavy Duty. Yesterday, Ram announced the 1500 was getting a trick tailgate to compete with the power tailgate on the Chevy Silverado and MultiPro tailgate on the GMC Sierra. Today, at the 2019 Chicago Auto Show, FCA will present the new Ram 4500 and 5500 chassis cab models. Like the Ram 2500 and 3500, the new chassis cab trucks appear to share a lot with the current crop of Ram HD trucks. The cab itself appears to be unchanged from the outside, though the front fascia has been updated to reflect Ram's current design. As with most things, it's what's inside that counts. The chassis cab models get the fantastic interior from the 2019 Ram 1500. It's a handsome and well-appointed cabin. Even base Tradesman models benefit from the new design and packaging. There's new tech, too. The 12-inch infotainment screen is nice to look at, but customers are likely to enjoy features like adaptive cruise control, forward collision warning and automatic emergency braking (with trailer brakes). The safety tech is available on all trim levels. The trucks also pack parking assist and a 270-degree camera view. There are also camera features to help hook up trailers (including fifth-wheel goosenecks). The Ram Chassis Cab 3500, 4500 and 5500 represent Class 3, 4 and 5 GVW ratings. As such they pack some punch under the hood. The standard engine is the 6.4-liter Hemi V8 making 410 horsepower and 429 pound-feet of torque, though 4500 and 5500 models only make 370 horsepower. The Ram 3500 features cylinder deactivation to improve fuel economy. The three trucks are available with a 6.7-liter Cummins turbo-diesel inline-six. The engine makes 360 horsepower and 800 pound-feet of torque. An Aisin six-speed auto is available on V8 models and standard with the diesel. Both engines are available with dual alternators. The trucks are available in four industry-standard frame lengths measured in inches from the cab to the rear axle: 60, 84, 108 and 120. Upgraded brakes should shorten stopping distances and improve pedal feel. Thanks to high-strength steel and aluminum, the truck should weigh about 120 pounds less than before.

2014 Ram ProMaster configurator reporting for heavy duty

Ram has brought the configurator online for all sizes of its new ProMaster van, known to the rest of the world as the Fiat Ducato. Destined to take on the new Ford Transit and Nissan NV, the ProMaster is available in three sizes - 1500, 2500, and 3500.
Once a size has been chosen, the world is your oyster. We could (probably) spend the rest of our day with this configurator and not repeat a build once. Each truck can be had in different styles ranging from windowed van to cargo hauler to cutaway truck, while buyers can also choose from a number of wheelbases and roof heights.
Add to that an options sheet that's almost Porsche-like in length, and you get a van that can be completely customized to the needs of your business. Check out all three configurators at the following links: 1500, 2500 and 3500.